Ki Rikwaymɛnt fɔ PTFE Tep we Dɛn Yuz fɔ Insuleshɔn Wrap fɔ Ilɛktronik Transfɔma ɛn Kɔyl

Insay di aplikeshɔn fɔ Jiangsu Aokai Nyu Matirial PTFE ay-tɛmpracha tep fɔ insuleshɔn rap fɔ ilɛktronik transfɔma ɛn kɔyl, dɛn fɔ kɔntrol di men tin dɛn we de dɔŋ ya strikt wan fɔ mek shɔ se di ilɛktrik, mɛkanikal ɛn prɔsesin prɔpati dɛn fɔ di PTFE tep mit dizayn standad dɛn.

I. Substrate ɛn Hɛt Rɛsistɛns Klas Rikwaymɛnt

PTFE tep fɔ yuz pure polytetrafluoroethylene (PTFE) as di bays matirial; fɔ spɛshal wok kɔndishɔn, dɛn kin pik PFA/FEP tayp PTFE tep.Di PTFE tep fɔ rich Klas H (180°C)  insuleshɔn rɛytin, we go mek shɔ se stebul lɔng tɛm ɔpreshɔn insay wan wayd tɛmpracha rɛnj we de -70°C to 260°C.

II. Witstand Vɔltɛm ɛn Insuleshɔn Pɔfɔmɛnshɔn Indeks

·  Dielektrik brekdaun vכltεj כf PTFE tep: ≥ 10 kV

·  Dayelektrik strכng: nכ less dan 600 V/μm

·  Insuleshɔn rɛsistɛns: > 1×106 MΩ

·  Dayelektrik lכs tεngεnt (na 1 MHz): kכntrol insay 1.0×10−4

III. Tiknɛs ɛn Wrap Strukchɔ Dizayn

Kɔmɔn singl-layer tiknes fɔ PTFE tep de frɔm 0.05 mm to 0.25 mm .Fɔ ay-vɔlt kɔyl, di rap layers fɔ PTFE tep nɔ fɔ smɔl pas 3 layers  (we tek 1 mil tiknes as ɛgzampul) fɔ mit di 3.75 kV withstand vɔlɔt requirement.No air bubbles or wrinkles nɔ fɔ lɛf bitwin layers na di PTFE tep.

IV. Mekanikal Strɔng ɛn Bɔnding Rikwaymɛnt dɛn

·  Tεnsil strכng: ≥ 35 N/10 mm

·  Elongation na brek: aprɔks. 133% to 200% .

·  Pil trɛnk to stɛl plet: ≥ 2.8 N/10 mm Di silikon adeziv fɔ di PTFE tep fɔ bia wit ay tɛmpracha fɔ riflɔ sɔlda.

V. Prɔses Adaptabiliti ɛn Flɛm Ritardans

PTFE tep fɔ bi flame retardant, we de fala UL 94 VTM 0.I go gɛt nɔ-stik ɛn smol sɔfayz prɔpati dɛn.I kemikal inɛtnɛs fɔ de stebul na humid, ɔzon ɛn sɔlvɛnt ɛnvayrɔmɛnt, fɔ mek shɔ se nɔ displeysmɛnt ɔ edj liftin we dɛn de waynd.

In sɔmari, Aokai Nyu Matirial strikt wan de pik PTFE tep we de kɔnfɔm to di indikɛtɔ dɛn we de ɔp, ɛn mek shɔ se dɛn rilaybiliti fɔ lɔng tɛm insay insuleshɔn rap fɔ ilɛktronik transfɔma kɔyl dɛn akɔdin to di kɔstɔma dɛn spɛshal aplikeshɔn rikwaymɛnt dɛn.

Di infɔmeshɔn we de ɔp na Jiangsu Aokai Nyu Matirial Tɛknɔlɔji Kɔmni, Ltd.

Fɔ ditayl spɛsifikɛshɔn, aplikeshɔn sɛnɛriɔ ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful prodak rɛnj — inklud PTFE ay-tɛmpracha fabrik, PTFE ay-tɛmpracha tep, PTFE ay-tɛmpracha mɛsh bɛlt, simlɛs bɛlt fɔ bonding mashin dɛn, singl-sayd PTFE fabrik, ay-tɛmpracha rɛsistant kɔnvaysɔ bɛlt, ay-tɛmpracha fayvglas fabrik ɛn mɔ — duya kɔntakt wi:

·  Savis Hotlayn:Mista. Guo: +86 18944819998 Mista Liu: +86 13705266308 Di wan dɛn we de wok fɔ di kɔmni

We wi de fala di savis filɔsofi fɔ profeshɔnal ɛn ɔnɛs, wi de gi yu wan-stɔp sɔlvishɔn ɛn atɛnshɔn savis wit ɔl wi at!