Wetin Na di Prɛkoshɔn fɔ Yuz PTFE Ay-Tɛmpratura Tep?

Jiangsu Aokai Nyu Matirial, we na wan pɔshɔnal sɔs manifakta fɔ PTFE ay-tɛmpracha klos, de sheb impɔtant prɛkoshɔn fɔ yuz PTFE ay-tɛmpracha tep.

I. Pripia Bifo yu Aplay PTFE Ay-Tɛmpratura Tep

insay mכr dan 80% pan di kes dεm we PTFE hεy-tεmprachכ tεp de lכs adheshon, di fεil de kכz fכ improper surface tritmεnt. So bifo yu aplay, yu fɔ fala dɛn tin ya strikt wan:

·  Klin gud gud wan : Yuz sɔlvɛnt dɛn we de dray fast lɛk anhydrous ethanol ɔ acetone fɔ pul ɔyl, dɔst, rɔst, ɛn ɔda tin dɛn we de na di say we di wata de kɔmɔt kpatakpata. Mek shɔ se di say we yu de dɔn dray ful wan afta yu dɔn klin; if nɔto dat, di tep nɔ go ebul fɔ tay fayn fayn wan.

·  Proper Polishing : If di surface smol pasmak, polish am jisnɔ wit 240–320 grit fayn sandpepa fɔ mek i adhesion bɛtɛ. Klin di say bak afta dat fɔ pul ɛni dɔst we lɛf, we rili impɔtant fɔ mek i tay fɔ lɔng tɛm.

·  Kɔnstrɔkshɔn Envayrɔmɛnt Kɔntrol : .

o  di sabstεrayt sεf tεmprachכ fכ mεnten bitwin 15°C εn 40°C .I pasmak hכy כ lכw tεmprachכ go ridyus di initial tak fכ di tep.

o  Nɔ yuz petrol, tin, ɔ ɔda sɔlvɛnt we go lɛf ɔyl, bikɔs dɛn go dɔti di adeziv say na di tep.

II. Ki Points fɔ Kɔrɛkt Aplikeshɔn

Standardized aplikeshɔn impɔtant fɔ mek shɔ se PTFE ay-tɛmpracha tep de wok.Duya notis dɛn tin ya we yu de wok:

·  Gentle Unwinding and Application : Unwind ɛn aplay di tep jisnɔ we yu nɔ strɛch am fɔs. We yu strɛch, i go mek yu shrinkage, difɔmeshɔn, ɔ debɔnd we yu de pan ɔt.

·  Wan-Tɛm Akkurat Ples : Align ɛn aplay di tep wan tɛm, avɔyd fɔ ripit fɔ pul am ɛn put am bak. Pres smɔl smɔl frɔm wan ɛnd to di ɔda wan, ɛn yuz skrap ɔ klos fɔ pul di bɔbul dɛn we di briz de blo.

·  Fam Ɛj Prɛsin : Afta yu dɔn yuz am, prɛs di ed dɛn fayn fayn wan bɔku tɛm wit finga ɔ tul fɔ mek di ed nɔ go ɔp. Fɔ aplikeshɔn dɛn na say dɛn we de shayk ɔ we gɛt ay tɛmpracha fɔ lɔng tɛm, dɛn kin yuz smɔl silikon silin we nɔ gɛt ay tɛmpracha na di ed dɛn fɔ mek dɛn ebul fɔ fiks am mɔ.

III. Stɔrej ɛn Mentɛnans fɔ PTFE Ay-Tɛmpratura Tep

If yu kip di tep fayn, dat de mek di tep nɔ wok fayn.Duya fala dɛn gaydlain ya:

·  Envayrɔmɛnt Rikwaymɛnt : Stɔr na kol, dray ples wit wan fayn tɛmpracha we na -5°C to 38°C  ɛn rilitiv humiditi we na 30%–70% RH . Kip away frɔm dairekt san layt, ɔt sɔs, ɛn kemikal dɛn lɛk asid, alkali, ɛn ɔyl.

·  Kɔrɛkt Ples : Stɔr di tep insay ful rol nɔmɔ. Dɛn nɔ fɔ fold ɔ ebi prɛshɔn, bikɔs i kin mek yu kris ɔ krak. Fɔ invɛntari we ol pas siks mɔnt, rol di tep ɔltɛm fɔ avɔyd lokal difɔmeshɔn frɔm prɛshɔn.

IV. Sef ɛn Envayrɔmɛnt Friɛndli Dispɔzishɔn fɔ Wɛst Tep

·  Nɔ Insinɛshɔn : Nɔ ɛva bɔn west PTFE ay-tɛmpracha tep. We pɔsin bɔn, i kin pul pɔyzin fluoride gas dɛn. Trowe di west tep as industrial sɔlid west ɔ hazada west akɔdin to di lokal envayrɔmɛnt rigyuleshɔn dɛn.

·  Avɔyd Kɔntakt wit Adhesive Surface : Minimiz dairekt finga kɔntakt wit di adhesive layt we yu de aplikeshɔn. Di ɔyl dɛn we de na di skin go dɔti di prɛshɔn-sɛnsitiv adhesive ɛn ridyus di adhesive bad bad wan.

Di infɔmeshɔn we de ɔp na Jiangsu Aokai Nyu Matirial Tɛknɔlɔji Kɔmni, Ltd.

Fɔ mɔ ditel bɔt paramita, aplikeshɔn sɛnɛriɔ, ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful prodak rɛnj — inklud PTFE ay-tɛmpracha klos, PTFE ay-tɛmpracha tep, PTFE ay-tɛmpracha mɛsh bɛlt, simlɛs bɛlt fɔ bonding mashin dɛn, singl-sayd PTFE klos, ay-tɛmpracha rɛsistant kɔnvayɔr bɛlt, ɛn ay-tɛmpracha rɛsistant glas fayba klos — duya kɔntakt wi:

·  Savis Hotlayn: Mista Guo 18944819998

·  Mista Liu 13705266308 ɔda pipul dɛn

Wi de sɔpɔt wan prɔfɛshɔnal ɛn ɔnɛs savis filɔsofi ɛn wi dɔn mekɔp wi maynd fɔ gi yu wan-stɔp sɔlvishɔn ɛn atɛnshɔn savis!