Aw Fɔ Stɔp Rol PTFE Tep Fɔ Stik To Insɛf We Dɛn De Stɔr am fɔ Lɔng Tɛm

Yu opin wan rol fɔ PTFE ay-tɛmpracha tep we dɔn sidɔm na stɔrɔj ​​fɔ mɔnt. We yu tray fɔ pul am, di layers dɛn kin stɔp togɛda. If yu pul dɛn apat, i de lɛf adhesive residue na di nɔ-stik bak sayd – di tep dɔn pwɛl.

Dɛn kɔl dis prɔblɛm intalay adheshon ɔ blok . I kin apin bikɔs ɔf tu tin: di kayn we aw PTFE ɛn silikon adeziv tan, plus di bad we aw dɛn kin kip am. Di gud nyus na dat dɛn kin mek i nɔ apin – ɔl tu bay aw dɛn mek di tep ɛn aw dɛn de kip am.

Aokai PTFE dɔn sɔlv dis prɔblɛm tru di we aw dɛn tek tɛm kɔntrol di prɔses. Dis gayd de ɛksplen wetin mek fɔ blok kin apin ɛn wetin yu kin du fɔ avɔyd am.

Wetin Mek PTFE Tep Blɔk? Tu Rut Kɔz

Fɔ mek yu nɔ blok, yu fɔ ɔndastand di tu we dɛn we de mek i nɔ blok.

1. Material prɔpati – PTFE mɛmori ɛn adhesive krip

• Elastik mεmכri fכ PTFE film: We dεn de prodyuz, PTFE mכlikul chen dεm de strεch. We dɛn wund di tep tayt ɛn kip am ɔnda prɛshɔn fɔ sɔm mɔnt, di strɛs we de insay de kɔmɔt smɔl smɔl. Di fim kin tray fɔ shrink bak, we kin mek di tep wɔp ɔ di adeziv kin kɔmɔt.

• Silikכn PSA krip: Silikכn prεshכn-sεnsitiv adhesive nכto sכlid – na sεmi-fluid viskoεlastik mεtirial. כnda sכstayn prεshכn εn hεt, i de fכlכ (krip) maykroskכpik wan, i de go insay di por dεm כ tεkschuכr na di nכn-stik bak sayd. Wans dat apin, di layers kin bon fɔ ɔltɛm.

2. Ekstanshal stכrej kondishכn dεm – hεt, humidity, εn prεshכn

• Tɛmpratura we pas 40°C: Ɔt kin mek di adhesive krip kwik kwik wan. PSA viskositi de dכp, εn fכ fכlכ de inkrεs.

• di hכy humiditi (>70% RH): mכsichכ kin mek di adhesive haydrolis, we de mek di sכfayz tacky εn protεkt adheshon.

• Mɛkanikal prɛshɔn frɔm stak: Ebi ebi rol dɛn we dɛn stak pan tap pan dɛnsɛf kin swɛt di adhesive layt agens di bak sayd na di nɛks layt, we kin fos fizik bond.

Di Manufakchurin Sɔlwɛshɔn – Gradient Winding Tɛnshɔn

Di wangren tin we impɔtant pas ɔl fɔ mek i nɔ blok na aw dɛn kin wund di tep we dɛn de mek am.

1. Di prinsipul – tayt na do, loose insaid

if dεn wund wan rol wit kכnstant hεy tεnshכn כlsay, di insay layεr dεm (nia di kכr) de כnda sכstayn kכmpreshכn strεs. Afta sɔm mɔnt we dɛn dɔn kip am, da strɛs de kin push di adeziv insay di bak sayd.

Wit gradient winding tɛnsiɔn : .

• Ɔta layers: wund tayt (fɔ kip di rol kɔmpakt) .

• insay layεr dεm: wund de lכs sכmtεm (fכ minimiz rεsidyual prεshכn pan di kכr) .

rizulεt: di kכr de εkspiriεns kכlכsכl nכ sכstayn prεshכn, so adhesive krep de kכlכsכl εliminet.

2. Aw dɛn kin du am – klos-lɔp tɛnsiɔn kɔntrol

Aokai PTFE de yuz wan klos-lɔp tɛnsiɔn kɔntrol sistɛm:

• Sensor dɛn de monitar di rial-taym rol dayamita

• Kontrola de kɔl di tɛnsiɔn we dɛn nid bay we i de yuz prɔpriet fɔmula dɛn

• Aktyuator (variable-frequency ɔ torque motors) de ajɔst di tɛnsiɔn dinamik wan as di rol de bil

Di tεnshכn we di wayndin de dכn de dכn sכmtεm frכm di insay ring to di כta ring. dis kin mek bak di rol dεm we tayt (we di layεr dεm we de insay kin kכmprεs so dat i at fכ pul dεm).

Atikul Prodakshɔn Mɛzhɔ – Biyɔn Windin

Gradient tension na di kor, bot oda manufakchurin step dem tu de helep.

1. Pik di rayt tin dɛn fɔ yuz

• High-cohesion silicone PSA: I nɔ kin izi fɔ krip ɔnda prɛshɔn ɛn ɔt.

• Ekstrud PTFE film: I gεt lכw mכlikul כryenteshכn strεs pas skived film, we de ridyus εlastik mεmכri ifekt dεm.

2. Put wan rilis kɔtin na di bak sayd

Trit di nכn-adhesive sayd fכ di sabstεrayt wit wan fluorosilicone rilis kכt כ prayma. Dis kin mek di ɛnaji we de na di bak sayd go dɔŋ, ɛn dis kin mek i at fɔ mek di adeziv tay pan am.

3. Ad fizik ayzolayshɔn fɔ tik adhesive gred dɛn

Fɔ tep dɛn we gɛt rili tik adhesive layers (>0.05mm), intaliv rilis pepa ɔ rilis film bitwin layers. Dis na fail-safe measure fɔ lɔng tɛm stɔrɔj ​​(ɔva 12 mɔnt).

Proper Storage – Yu Rispɔnsibiliti Afta Yu Bay

Ivin di tep we dɛn mek fayn fayn wan kin blok if dɛn nɔ kip am di rayt we. Fɔ fala dɛn lɔ ya.

1. Envayrɔmɛnt kɔntrol – kip am kol ɛn dray

2. Handling and stacking – nɔ gɛt ebi ebi prɛshɔn

• Put rol dɛn ɔrizɔntal (na dɛn sayd) pan rɛk dɛn. Nɔ ɛva tinap dɛn stret – dis kin mek di ed difɔmeshɔn.

• Yuz stɔrɔj ​​rɛk fɔ bɔku bɔku stok. Nɔ stak rol dɛn pas 3-4 ay – di bɔt rol dɛn go gɛt prɛshɔn we pasmak.

• Rotate rol dεm kwata wan – chenj di strεs-bεaring posishכn bay we yu muv bכtכm rol dεm to di tכp.

• Kip di ɔrijinal pak intakt – di plastic wrap de protɛkt frɔm dɔst ɛn humidity. If i dɔn pwɛl, ri-sial am wantɛm wantɛm wit plastic film.

3. Wetin fɔ du wit di rol dɛn we dɔn de we kin dɔn ɔlrɛdi de pan denja

If yu gɛt rol dɛn we dɛn dɔn kip na say we nɔ fayn (ɔt, wet, we dɛn dɔn stak ay), tɛst wan smɔl sampul bifo yu put dɛn na prodakshɔn. Unwind 1-2 mita ɛn chɛk fɔ:

• Unusual resistance wen yu de unwinding

• Adhesive residue na di bak sayd

• Visible difomeshɔn fɔ di rol kɔr

If yu no ɛni wan pan dɛn tin ya, wam di rol jisnɔ (30-40°C fɔ sɔm awa) bifo yu pul am – di adeziv kin sof fɔ rilis klin wan. Bɔt fɔ impɔtant aplikeshɔn dɛn, chenj di rol.

Sɔma – Wan Kɔmplit Anti-Blɔk Chɛklist

Aokai PTFE de mek PTFE ay-tɛmpracha tep wit gradient wayndin tɛnsiɔn as standad. Fɔ stɔrɔj ​​fɔ lɔng tɛm (ɔva 6 mɔnt), wi kin advays fɔ sial ɔda rol dɛn insay mɔstɔ-baria fɔyl bag ɛn kip dɛn na kɔndishɔn we klaymat kin kɔntrol. Kontakt wi fɔ kɔstɔm pak opshɔn dɛn.

Di tin dɛn we de ɔp na... Jiangsu Aokai Nyu Matirial Teknɔlɔji Kɔmni, Ltd.

If yu nid mɔ infɔmeshɔn bɔt spɛsifikɛshɔn, aplikeshɔn sɛnɛriɔ ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful prodak layn, inklud PTFE ay-tɛmpracha fabrik, PTFE ay-tɛmpracha tep, PTFE mɛsh bɛlt, simlɛs bɔnd mashin bɛlt, singl-sayd PTFE klos, ay-tɛmpracha rɛsistant kɔnvaysɔ bɛlt ɛn ay-tɛmpracha rɛsistant fayvglas fabrik, duya kɔntakt wi:

• Mista Guo: +86 18944819998 kin yuz am

• Mista Liu: +86 13705266308 yuz am

Wi de fala di filɔsofi fɔ profeshɔnal ɛn ɔnɛs, ɛn tray fɔ gi yu wan-stɔp sɔlvishɔn ɛn savis we yu tink bɔt.