Fɔ Ekstrim Kɔndishɔn & Lasting Pɔfɔmɛnshɔn
Yu Rilaybul Manufacturer fɔ PTFE Film Tep

Yu Spid Up Wokflɔ: Nɔn-Stik Sɔfays, Fasta Ɔpreshɔn

Yu Maksimayz Valyu: Lɛs Wɛst, Ay Profɛt

RIKƐST KƆT

Os » Prodakt dɛn we dɛn kin mek » PTFE Adhesive Tep we yu kin yuz » PTFE Film Tep fɔ di fim » Rɛd PTFE Tep

Rɛd PTFE Tep

Rɛd PTFE Tep dɛn kin kɔl am bak PTFE Adhesive Tep.

1.Dis surface gɛt gud non adhesion ɛn sliding prɔpati;
2.Gud ilɛktrik insuleshɔn;
3.Dɛn kin yuz am na bɔku bɔku tɛmpracha;
4.Gud brekdaun vɔlɔt rɛsistɛns;
5.Sɛtifiket dɛn: ISO 9001: 2015, FDA;
6.Eksɛlɛnt savis & sɔpɔt inklud prɛ-sɛl, in-sɛl & afta-sɛl;
7.Aksept kɔstɔmayt;
8.OEM / OBM savis.


Di tin dɛn we yu kin gɛt:



Aks kwɛstyɔn

Rɛd PTFE tep PTFE Adhesive Tep we yu kin yuz

Di Kategori fɔ Prodakt

Diskripshɔn fɔ di Prodak

Rɛd PTFE tep na spɛshal wan fɔ ay-pafɔmɛnshɔn aplikeshɔn dɛn we nid fɔ gɛt strɔng, rili bond, bɔku tɛm na say dɛn usay i impɔtant fɔ mek i te ɛn fɔ mek i ebul fɔ bia.

Prodakt Fichar fɔ Rɛd PTFE tep

Di rɛd kɔlɔ de difrɛns am frɔm standad wayt ɔ ɔda PTFE tep dɛn, di brayt rɛd kɔlɔ de ɛp wit visibiliti we yu de yuz am, we de mek am izi fɔ handel ɛn posishun.

Aplikeshɔn dɛn fɔ Rɛd PTFE tep

● Dɛn kin lamin am wit mɛtal, plastic ɛn sɛramik as jenɛral slaydin matirial.

● Fɔ bɛlt dɛn we nɔ gɛt ɛnd fɔ polyethylene laminators

● Fɔ rol rap fɔ polyethylene laminators

● Fɔ insuleshɔn fɔ kɔyl dɛn as klas H insuleshɔn matirial.

Teknik Paramita dɛn fɔ Rɛd PTFE tep

Prodakt kod

Total tiknɛs mm

Standart wird mm(in) .

Maksimal wit mm(in) .

Lɛngth m

MR

0.1

10,13,19,25,30,38,50

500

10-33

Red PTFE Tep Manufacturer

Aokai PTFE de pe atɛnshɔn fɔ gi ay kwaliti PTFE kɔt fayv glas fabrik ɛn fayn fayn savis lɛvɛl dɛn. Wi na profeshɔnal PTFE kɔt fayv glas fabrik manifakta dɛn we go ɛp yu pan dɛn eria ya: bɛsik matirial, finish prodak kwaliti, delivri, ɛn afta-sɛl savis. Aokai de gi yu ɔlsay, kɔstɔmayshɔn, dizayn, pak, industri sɔlvishɔn, ɛn ɔda OEM OBM savis dɛn. Wi profeshɔnal R&D tim, prodakshɔn tim, kwaliti inspekshɔn tim, tɛknikal savis tim, ɛn pri-sɛl & afta-sɛl savis tim go gi yu wan-stɔp savis, sev yu tɛm ɛn mek shɔ se di mɔs prɔfɛshɔnal prodak kwaliti.

Patna dɛn we de wok togɛda

Usay fɔ bay Rɛd PTFE tep?

If yu gɛt ɛni kwɛstyɔn bɔt Red PTFE tep , duya nɔ shek fɔ kɔntakt wi na mandy@akptfe.com go si am . Wi go gi ditayla infɔmeshɔn ɛn tɛnki sɔpɔt bɔt di prɔdak ficha dɛn, spɛsifikɛshɔn dɛn, sɔlvishɔn dɛn ɛn kɔstɔmayshɔn opshɔn dɛn... Wɛlkɔm yu fɔ kam na wi faktri!

Fɔ aks kwɛstyɔn ɔ fɔ mek ɔda, duya kɔntakt wi.

Q A kin ɔda kɔstɔm wit ɔ lɔng?

A Yɛs. Wi de gi yu kɔstɔm wit, tik, ɛn rol lɔng fɔ fit yu prɔses. Kɔntakt wi sɛl tim wit yu spesifikeshɔn ɛn kwantiti we yu nid.
Q Aw a fɔ kip ɛn handle di tep?

A Stɔ na ples we kol ɛn dray we nɔ gɛt dairekt san ɛn ɔt sɔs. Nɔ fɔ de na di wata we de na di wata fɔ lɔng tɛm. Kip di rol insay in fɔs pak we yu nɔ de yuz am.
Q Wetin na di tipik lida tɛm?

Wan Standard prodakt ship insay 7 biznɛs dez afta dɛn dɔn kɔnfɔm di ɔda; di kɔstɔm opshɔn dɛn kin tek lɔng tɛm. Wi go konfam wan fam lida taim wit yu at oda.
Q Di adhesive na silikon-based, akrilik, silikon-asetate?

A Di adeziv na silikon-based, bɔt, di kɔstɔma kin kɔstɔmayz akrilik-based tep, we de gi ay adheshon.
Q Wetin na di difrɛns bitwin PTFE silikon adeziv tep ɛn PTFE akrilik tep?

WAN
Tɛmpratura pefɔmɛns

● Silikɔn adeziv:

Eksɛlɛnt ay-tɛmpracha stebiliti ɛn i de kɔntinyu fɔ fleksibul na lɔw tɛmpracha; fayn fɔ tɛmal sayklɔs ɛn gasket/sil.

● Akrilik adeziv:

Gud ɔvala tɛmpracha pefɔmɛns bɔt jɔs nɔ kin fleksibul lɛk silikon; i kin bi mכr brit we di tεmprechכr rili lכw כ i kin sכft we di tεmprachכ hכy.

Kεmikכl rεsistεns εn envayroment

● Silikɔn adeziv:

I fayn fɔ mek i nɔ gɛt wata, i kin put am insay wata, i kin mek i nɔ gɛt UV (fɔ yuz am na do), ɛn i kin yuz bɔku kemikal dɛn; de mek i kɔntinyu fɔ gɛt ɛlastik.

● Akrilik adeziv:

Gud kεmikכl εn UV rεsistεns fכ plεnti envayroment bכt tipikli less fleksibul pas silikon; di wεda rεsistεns na fכmyuleshכn-dipεndεnt.

Fleksibiliti vs rigiditi

● Silikɔn adhesive pan PTFE:

Mɔ fleksibul, ebul fɔ akɔmod muvmɛnt, vaybreshɔn, ɛn tɛmal ɛkspɛnshɔn we nɔ go lɔs sil.

● Akrilik adhesive pan PTFE:

Tipikli stiff; strɔng initial hold bɔt less fɔgiv wit muvmɛnt; bɛtɛ fɔ rigid, ay-tak bɔnd dɛn.

Prodakt dɛn we gɛt fɔ du wit dis

Wait PTFE Tep we yu go yuz

PTFE Film Tep fɔ di fim

Atikul dɛn we gɛt fɔ du wit dis

[PTFE Adhesive Tep we yu kin yuz ] Us Sɛtifiket dɛn A fɔ Luk fɔ na Food-Grade PTFE Tape?

Us Sɛtifiket dɛn A fɔ Luk fɔ na Fɔd-Grɛd PTFE Tep?Di impɔtant kwalifayeshɔn dɛn fɔ luk fɔ insay fud-grɛd PTFE adeziv tep fɔ yuz na kɔmɛshɔn na FDA kɔmplians, NSF sɛtifikeshɔn, ɛn ISO 9001:2015 kwaliti mɛnejɛmɛnt standad. Dɛn sɛtifiket ya de mek shɔ se di polytetrafluoro
[PTFE Adhesive Tep we yu kin yuz ] PTFE Fayberglass Tep vs Silikɔn Tep Kɔmpiashɔn

Bɔku pan di prokyumɛnt manija dɛn want di bɛst pefɔmɛns we dɛn de luk pan industrial adhesive choices. Dɛn nid fɔ no di difrɛns bitwin PTFE fayv glas tep ɛn silikon tep. Polytetrafluoroethylene layt de gi PTFE fayv glas tep in big nɔ-stik prɔpati dɛn we i de wef fayv glas giv
[PTFE Adhesive Tep we yu kin yuz ] Kastom PTFE Film Tep Solushɔn fɔ OEM Ikwipmɛnt

Kastom PTFE film tep sɔlvishɔn impɔtant fɔ mek mɔdan OEM ikwipmɛnt fɔ bɔku bɔku biznɛs. Dɛn spɛshal tep ya de yuz di big big prɔpati dɛn we polytetrafluoroethylene gɛt wit injinɛri we dɛn mek fɔ mit di nid dɛn fɔ patikyula ikwipmɛnt. OEM mekers dipen pan PTFE film tep beca
[PTFE Adhesive Tep we yu kin yuz ] PTFE Adhesive Tape fɔ Kɔntinyu fɔ Sial Mashin dɛn

Di nyu PTFE adeziv tep na big step fɔ go bifo fɔ kɔntinyu fɔ silin tul dɛn bikɔs i gɛt ɔl tu strɔng adhesive bak ɛn big nɔ-stik prɔpati dɛn. Dis spɛshal industrial tep fayn fɔ ɔt silin wok bikɔs i kin ebul fɔ handle tɛmpracha we go rich 260°C ɛn i nɔ de miks wit kemikal. Kɔmni we de wok
[PTFE Adhesive Tep we yu kin yuz ] Wetin Mek PTFE Adhesive Tape Ridyus Mashin Dauntaym?

Ɛvri ia, di tɛm we di mashin dɛn nɔ de wok, dat kin mek di wan dɛn we de mek tin dɛn, bɔku bɔku mɔni. Dɛn dɔn sho se PTFE adhesive tape kin sɔlv dis prɔblɛm trade. Dis spɛshal tep de stɔp di ikwipmɛnt fɔ brok bay in strɔng nɔ-stik kɔtin, ebul fɔ bia wit ay tɛmpracha te to 260°C, ɛn strɔng s