PTFE ay-tɛmpracha fabrik savis layf kin difrɛn bad bad wan bay aplikeshɔn. Kεmikכl anti-kכroshכn layn kin las 3+ ia (4x lכng pas rכba). Food baking trays las mɔnt wit smɔl degradation. Indastrial kɔnvayɔr bɛlt dɛn kin wɛr bikɔs ɔf frikshɔn. PV laminεshכn (150°C, EVA kכntakt) gεt mכdarεt layf. Hevi frikshɔn aplikeshɔn dɛn (abrasive disk) gɛt shɔt layf. di men tin dεm: tεmprachכ kכntrכl (stεy ≤260°C), avכyd shap kris, klin am כltεm, εn riples am di tεm we yu blista כ yכlכ.

PTFE ay-tεmprachכ fabrik de stebul te to 300°C, bכt insay faya i de kכmכt εn rilis hεli tכxik gas dεm: haydrojεn fכrayd (HF) (korosiv, pulmonari εdima) εn pεrfluoroisobutylene (PFIB) (we nכ gεt kכla, nכ de smεl, ~10x mכr tכxik pas fכsjin, nכ antidot). Dɔn bak, kabɔn monoksayd, PFOA rɛsɛdyu, ɛn trays dayɔksin. Ɔdinari smok mask dɛn nɔ de wok; yuz self-contained breathing apparatus (SCBA) we yu kin yuz fɔ blo. Di sayn dɛm kin delay.

PTFE ay-tɛmpracha fabrik (PTFE-coated fiberglass) fayn fɔ maykrowev ɔt bikɔs i de transmit maykrowev we nɔ de absɔb ɛnaji, i de tinap fɔ 260°C, ɛn i gɛt say we nɔ de stik. Di tin dɛn we dɛn kin yuz na maykrowev baking mat, industrial dryer conveyor belt, riaktɔ layn fɔ kemikal dijeshɔn, ɛn maykrowev pɔpkɔn bag layna. FDA gred dɛn we de fɔ kɔntakt it.

PTFE ay-tɛmpracha fabrik (PTFE-coated fiberglass) gɛt po fleks rɛsistɛns bikɔs di fayv glas sabstret na inhɛrɛntly brittle. Fabrik dεm we tכn (0.08mm) de liv fכ כndrεd to tawzin fold dεm; hεvi gred (>0.25mm) krak afta dכzin. Satin wev de wok pas plain wev. Fɔ kɔntinyu fɔ bɛnd rɛsiprokɛt, tink bɔt sɔlid PTFE fim ɔ aramid-bɛs fabrik insted.

PTFE ay-tɛmpracha fabrik (PTFE-coated fiberglass) na wan we dɛn kin yuz bɔku bɔku wan fɔ print tɛkstayl ɛn day fɔ ɔt transfa printin bɛlt (180-230°C), skrin printin tebul kɔva, drying mɛsh bɛlt, fiuz mashin bɛlt, ɛn rɔla rap. I nɔ-stik sɔfays de mek ink/adhesive rɛsɛdyu nɔ de, i de ridyus di tɛm we dɛn de klin ɛn i de mek di klos kwaliti bɛtɛ. Bɛlt dɛn we nɔ gɛt ɛnd we nɔ gɛt wan bɔt de mek pɔsin ebul fɔ kɔntinyu fɔ mek tin dɛn.

PTFE ay-tɛmpracha fabrik (PTFE-coated fiberglass) na prɛmiɔm filta midia fɔ ekstrim kɔndishɔn: fɔ pul flu gas dɔst (simɛnt, west insinɛshɔn, kol bɔyl dɛn we go rich 260°C), kɔrosiv likwid filtreshɔn (asid, alkali, ɔyl), it/famasiutik steril filtreshɔn, ɛn HEPA klin rum filta. Di say we nɔ stik kin mek dɔst nɔ kek ɛn i kin mek i izi fɔ klin. Membran-laminated gred dεm de achy ultra-lכw efyushכn.

PTFE ay-tɛmpracha klos de mentɛn fayn fayn ilɛktrik insuleshɔn frɔm -180°C to 260°C: volyum rɛsistiviti >1013 Ω·cm na 200°C, dayelɛktrik kɔnstant stebul na 2.0-2.1. oba 260°C, PTFE de sof, i de kכmכt oba 327°C, i de lכs insulεshכn fכ כltεm. dכn 0°C, insulεshכn de impruv bכt di kכt de bi brit. Stay insay 260°C fɔ rili pefɔmɛns.

PTFE ay-tɛmpracha fabrik (PTFE-coated fiberglass) na fayn tin fɔ it kɔnvayɔr bɛlt bikɔs ɔf in 260°C ɔt rɛsistɛns, -70°C kol fleksibiliti, nɔ-stik sɔfays, ɛn FDA kɔmplians. Ki aplikeshɔn dɛn: bekeri ɔvin (biskit, bred, pizza), fried it kɔnvayɔ, kandy kol layn, friz tanɛl, ɔt sila, ɛn rɔla rap. I de ridyus di tɛm we dɛn de west ɛn fɔ klin.

Surface finishing agents we dɛn aplay to fiberglass fabric bifo PTFE coating na impɔtant tin fɔ fayn PTFE ay-tɛmpracha klos pefɔmɛns. כrganosilane kכplεn ejen dεm de mek mכlikul brij bitwin inכrganik glas fayba εn כrganik PTFE, we de bכst di trεnk fכ di pεl frכm <2 N/cm to 4-8+ N/cm. di rayt tritmɛnt de ɛp bak fɔ mek yu nɔ gɛt wam (260°C+), yu nɔ de wok wit dayelɛktrik, ɛn i de mek yu nɔ gɛt kemikal. Fabrik we dɛn nɔ trit kin mek i delamination, bubbling, ɛn shɔt savis layf.

Kalɛnda – we yu prɛs PTFE-kɔt fabrik bitwin di ɔt miro rɔla dɛn na 360-380°C – i de chenj di sɔfayz mɔfɔlɔji, rilis prɔpati, impermiabiliti, ɛn mɛkanikal pefɔmɛns bad bad wan. i de ridyus di rכf frכm Ra 0.5-1.0 μm to <0.05 μm, i de sial pinhol dεm, i de impruv di wear rεsistεns, bכt i de dכn di tεar strכng εn fleksibiliti. Impɔtant fɔ rilis layna ɛn ilɛktrik insuleshɔn.