PTFE High-Temperature Fabric in Tekstil Printin & Daying: 6 Ki

Insay tɛkstayl printin ɛn day, stika prɔblɛm dɛn kin stɔp fɔ mek dɛn. Di ink we de trowe di ɔt transfa pan rɔla dɛn kin dɔti di nɛks batch fɔ di klos. Wet day ɛn sayzin ɛjɛn we de stik to drying mesh de mek i nɔ ivin dray ɛn mak. Hot-melt adhesive frɔm fusing mashin dɛn kin bil pan kɔnvayɔr bɛlt, ɛn i kin nid fɔ skrap fɔ lɔng lɔng tɛm.

PTFE ay-tεmprachכ fabrik – PTFE-kכt fayv glas – de sכlv dεn adheshon ed pen ya. Wit 260°C ɔt rɛsistɛns, ɔlta-lɔ sɔfayz ɛnaji, ɛn kemikal inɛtnɛs, i de sav as nɔ-stik kɔnvaysɔ bɛlt, rilis layna, rɔla wrap, ɛn protɛktiv kusɛn ɔlsay na di industri.

Aokai PTFE dɔn de saplae PTFE fabrik to tɛkstayl mil ɛn ikwipmɛnt manifakta dɛn fɔ lɔng lɔng tɛm. Dis atikul de tɔk bɔt siks aplikeshɔn eria dɛn: ɔt transfa printin, skrin printin tebul, drying & ɔt-sɛtin, fiuz mashin, kɔtin rɔla, ɛn ɔgzilari yus.

Kor Konsumabl fɔ Hɛt Transfa Printin Mashin dɛn

Dis na wan pan di big-kɔnsɔm aplikeshɔn dɛn fɔ PTFE ay-tɛmpracha klos insay printin & day. We dɛn de print ɔt transfa, dɛn kin pres di klos ɛn transfa pepa dɛn togɛda ɔnda ay tɛmpracha (180°C–230°C) ɛn ay prɛshɔn fɔ mek dɛn sablim di printin ink dɛn.

Prodakt fɔm: Simlɛs ɛndlɛs PTFE bɛlt dɛn insay kɔstɔm wit ɛn lɔng, ɔ PTFE adeziv tep fɔ rɔla rap.

Aokai PTFE de mek PTFE bɛlt dɛn we nɔ gɛt ɛnd fɔ ɔt transfa printin we go rich 2 mita waid, wit kɔstɔm lɔng ɛn splais we dɛn de yuz. Dɛn dɔn validet wi bɛlt dɛn pan di big big printa brand dɛn.

Protektiv Kɔva fɔ Print Tebulbɔd & Kɔnvaysɔ Bɛlt

1. Flat & Rotary Skrin Printin Kɔnvaysɔ Bɛlt dɛn

Printin paste kin pas insay skrin freym dɛn ɛn i kin put am pan klos dɛn we dɛn le pan kɔnvayɔr bɛlt dɛn. Pan ɔl we dɛn kɔt di ɔrijinal bɛlt dɛn wit watapruf finish, dɛn kin yuz PTFE ay-tɛmpracha klos bɔku bɔku wan insay di bɛlt klin yunit dɛn ɔ fɔ pat pan di protɛkshɔn fɔ avɔyd sɛkɔndari kɔntaminɛshɔn frɔm di rɛsɛdyual printin paste. Sɔm ikwipmɛnt dɛn kin ivin adopt PTFE fayv glas klos as di sɔfa layt fɔ kɔnvayɔr bɛlt dɛn dairekt wan.

2. Manual Tebul Printin Klot

We dɛn le am flat pan tebulbɔd dɛn we dɛn kin print wit an, in ɔlta-smol nɔ-stik sɔfays de mek i izi fɔ riples di klos ɛn i de mek tebul glu ɛn printin paste nɔ gɛda fɔ lɔng tɛm we go mek tebul sɔfays nɔ ivin.

Benefit: I de mek yu nɔ nid fɔ kɔt di tebul bak wit adeziv ɔltɛm; di fabrik riposishun kin fast fast.

Non-Stik Kɔnvaysɔ Bɛlt fɔ Dray & Ɔt-Sɛtin Ikwipmɛnt

Fabrik dɛn afta dɛn dɔn day, print, ɛn sayz nid fɔ drɛy ɛn sɛt dɛn wit ɔt. Di dayest we nɔ fiks, sayzin ɛjɛn, ɛn sɔftɛn pan wet klos kin stik pan drying mesh ɔnda ay ɔt.

Prodak fכm: PTFE opin-mεsh bεlt (difrεn mεsh saiz dεm) fכ εya fכ fכlכ; solid PTFE fabrik fɔ ful sɔpɔt.

Ikwipmɛnt fɔ Garment Fusing ɛn Hɛt Prɛs

Dɛn kin yuz am bɔku say fɔ hot-mɛlt ​​intalayn bondin (shirt kɔla, kɔf), ɔt transfa printin, ɛn pletin prɔses insay klos finish.

Ki bɛnifit: I de protɛkt dia dia dia ɔt plet dɛn frɔm adhesive rɛsɛdyu; i de mek di ikwipmɛnt layf lɔng.

Anti-Stik Rola Wrapping fɔ Kɔtin & Laminɛshɔn Ikwipmɛnt

We dɛn kɔt di tɛkstayl dɛn wit PU, PA, PVC, ɔ laminated wit film dɛn via flame lamination: Dɛn kin rap di gayd rɔla ɛn kol rɔla dɛn insay di kɔtin ɔvin dɛn wit PTFE ay-tɛmpracha klos ɔ PTFE silikon adeziv tep. Dis kin mek di kɔtin glu we nɔ dɔn wɛl nɔ kin stik to rɔla dɛn ɛn mek di klos rɔtin ɔ skrach.

Prodakt fom: PTFE adeziv tep in difrɛn wit fɔ izi rɔla wrap; seamless PTFE sliv fɔ ay-spid rɔla dɛn.

Ɔda Ɔksijɛn Aplikeshɔn dɛn

Sɔma – Wetin Mek PTFE Fabrik Na Indipɛnsabl insay Tɛkstayl Printin & Day

In sɔmari , di kɔr advantej fɔ PTFE ay-tɛmpracha fabrik insay tɛkstayl printin ɛn day na fɔ sɔlv ay-tɛmpracha adheshon trɔbul. I de wok as ɔda we fɔ rilis pepa, anti-stik layn fɔ kɔnvayɔr bɛlt, ikwipmɛnt protɛktiv kusɛn, ɛn ayzolayt film – ifɛktiv wan impɔtant fɔ mek di klos kwaliti we dɛn dɔn dɔn bɛtɛ ɛn ridyus di ikwipmɛnt mentenɛns frikyuɛnsi, so dat i de sɔpɔt kɔntinyu ɔtomatik prodakshɔn.

Frɔm ɔt transfa printin bɛlt we de wok na 230°C to drying mesh bɛlt we de handle wet dayed fabrik, frɔm fiuz mashin bɛlt to kalenda protɛktiv layers, PTFE fabrik de gi nɔ-stik pefɔmɛns we nɔ gɛt wan kɔmpitishɔn, ɔt rɛsistɛns, ɛn kemikal inɛtnɛs.

Nid PTFE ay-tɛmpracha fabrik fɔ yu tɛkstayl printin ɔ day layn? Aokai PTFE de gi yu bɛlt dɛn we nɔ gɛt ɛnd, mɛsh bɛlt, adeziv tep rol, ɛn tebul kɔva dɛn we dɛn kɔstɔm. Kɔntakt wi wit yu ikwipmɛnt tayp, opareshɔn tɛmpracha, ɛn dimɛnshɔn fɔ wan rɛkɛmɔndeshɔn.

Di tɛknikal dɔkyumɛnt we de ɔp na... Jiangsu Aokai Nyu Matirial Teknɔlɔji Kɔmni, Ltd.

Fɔ ditayl spɛsifikɛshɔn, aplikeshɔn introdukshɔn, ɛn kɔstɔmayz sɔlvishɔn fɔ ful-rɛnj prodak dɛn inklud PTFE ay-tɛmpracha klos, PTFE ay-tɛmpracha adeziv tep, PTFE mɛsh kɔnvaysɔ bɛlt, simlɛs fiuzin mashin bɛlt, singl-sayd PTFE kɔt fabrik, ay-tɛmpracha resistant kɔnvaysɔ bɛlt ɛn fayvglas klos , duya kɔntakt wi:

• Mista Guo: +86 18944819998 kin yuz am

• Mista Liu: +86 13705266308 yuz am

Wi de fala profeshɔnal ɛn intɛgriti fɔ gi ɔl-raun wan-stɔp industrial sɔlvishɔn ɛn kastoma savis we wi tink gud wan.