Splicing Methods fɔ PTFE Ay-tɛmpracha Fabrik Kɔnvaysɔ Bɛlt dɛn

Jiangsu Aokai Nyu Matirial, di ɔrijinal manifakta fɔ PTFE ay-tɛmpracha fabrik, introduks siks kɔmɔn splays we fɔ PTFE ay-tɛmpracha fabrik kɔnvaysɔ bɛlt:

1. Mitre Splais / Lap Splais

Dis na splais we nɔ de kɔmɔt. di tu εnd dεm na di kכnvayכr bεlt dεn kכt dεm na wan sכm angle (lεk 45°) כ כvalap bay lεk 6 cm. Dɛn kin sandwich ay-tɛmpracha adeziv ɔ F46 fim na di midul, dɔn dɛn kin bon am wit ay-tɛmpracha ayɛn we de arawnd 400°C ɛn kol am fɔ shep.

Advantej : Simpul opareshɔn ɛn lɔw kɔst, wan pan di mɔs yuz industrial splays we.

Di bad tin dεm : di sεkshכn we de כvalap de tik di jכint εn i kin afekt stebul כpεreshכn.

Splice Strength : Na lɛk 70% pan di ɔrijinal bɛlt trɛnk.

Aplikeshɔn : Kɔnvɛnshɔnal thermal drying ikwipmɛnt wit mɔdaret flatnɛs rikwaymɛnt, lɛk dryers ɛn UV curing mashin dɛn.

Fɔ mek yu gɛt ay flatnɛs, di ɔpgrɛd skiv lap splais  de. di joyn εria de tin bifo i lap fכ wan flat sεf, yet i nid komplεks prכsεsin εn hכy tεknikal skil.

2. Fish Mɔt Splais (Flɛksibul Splais) .

Wan detachable jɔyn fɔ izi instɔleshɔn, disassembly ɛn klin, ɛn di men opshɔn fɔ PTFE mɛsh kɔnvayɔr bɛlt. Dɛn kin mek row dɛn we gɛt smɔl ol dɛn we dɛn dɔn siŋ bifo tɛm na ɔl tu di bɛlt ɛnd dɛn, we dɛn kin kɔnɛkt na di sayt wit stɛl waya ɔ Kevlar rop.

Advantej : I izi fɔ ɔpreshɔn ɛn ful-ɔp fɔ pul am.

Disadvantages : Gap na di joyn kin mek matirial lik; rili smɔl trɛnk, nɔ fayn fɔ kɛr ebi ebi lod go.

Splice Strength : Na lɛk 60% pan di ɔrijinal bɛlt trɛnk.

Aplikeshɔn : Ikwipmɛnt dɛn we nid fɔ disassembly ɛn klin bɔku tɛm, lɛk fɔ bek it, fɔ print tɛkstayl ɛn day, wit ay ay permiabiliti ɛn flatnɛs dimand.

3. Stilin Fastener Splais

Wan detachable yet kɔmplikɛt mɛkanikal kɔnɛkshɔn. Dɛn kin krimp di stenlɛs stiɛl fastɛns dɛn fayn fayn wan to ɔl tu di bɛlt ɛnd dɛn wit pɔshɔnal tul dɛn ɛn dɛn kin fiks dɛn wit pin.

Advantej : Ekstrim fayn kɔnɛkshɔn ɛn ay tɛnsiɛl trɛnk.

Disadvantages : I kɔst ay, i nɔ izi fɔ disassembly ɛn i kin pwɛl di bɛlt. Had fastɛns kin mek nɔys we dɛn de wok ɛn dɛn nɔ fɔ alaw am na say dɛn we dɛn de wok we gɛt mɛtal.

Splice Strength : Ultra-high, fayn fɔ hevi-lod ɔpreshɔn.

Aplikeshɔn : Hevi-duti, ay-spid industrial kɔnvɛyshɔn ɛn wok kɔndishɔn dɛn we nid fayn fayn tɛnsiɛl rɛsistɛns.

4. Bɔt Splais

Wan jɔyn we nɔ de kɔmɔt we dɛn mek fɔ mek i flat. Di tu bɛlt ɛnd dɛn de alaynɛd ​​fayn fayn wan ɛn dɛn nɔ de ɔvalap. Dɛn kin pad adhesive ɛn riinforcing fabrik we gɛt ay tɛmpracha ɔnda, dɔn dɛn kin bon am ɔnda ɔt ɛn prɛshɔn.

Advantej : Klosap nɔ tik na di jɔyn fɔ ɔltra-smol ɔpreshɔn.

Disadvantages : High teknikol rikwaym, low joyn trɛnk ɛn po durability.

Splice Strength : Na lɛk 50% pan di ɔrijinal bɛlt trɛnk.

Aplikeshɔn : Prɛsishɔn kɔnvɛyshɔn sɛnɛriɔ wit strikt sɔfayz flatnɛs rikwaymɛnt.

5. Splais we gɛt sɛrat

Wan ay-pafɔmɛnshɔn ɔpgrɛd vɛshɔn fɔ di bɔt splais. di joyn εnd dεm dεn kכt insay intalכk zigzag shep dεm fכ inkrεs di bonding εria εn bכku bכku wan impruv kכnekshכn trεnk.

di advantej dεm : Sεpiriכr trεnk, we de rich 90%-95% pan di כrijinal bεlt.

Di bad tin dɛn we kin apin : I kin tek bɔku tɛm fɔ mek tin, dɛn nid fɔ mek spɛshal mol dɛn ɛn dɛn kin spɛn bɔku mɔni.

Splais Strɔng : 90%-95%.

Aplikeshɔn : Prɛsishɔn ɛn ebi-diuti kɔnvɛyshɔn wit strikt dual rikwaymɛnt fɔ splais trɛnk ɛn flatnɛs.

6. Splais we gɛt di tayp na di wɔl

Wan jɔyn we dɛn kin pul we dɛn mek spɛshal fɔ mek i nɔ wear ɛn fɔ bɛn am ɔltɛm. Dɛn kin mek silinda strip dɛn we dɛn mek wit Kevlar klos na ɔl tu di bɛlt ɛnd dɛn ɛn dɛn kin kɔnɛkt dɛn wit stɛl waya.

Advantej : Eksɛlɛnt wear resistans ɛn gud fleksibiliti.

Disadvantages : Limitɛd tɛnsiɛl trɛnk, nɔ apɔynt fɔ ebi lod.

Aw fɔ yuz am : Ikwipmɛnt we gɛt rɔla dɛn we dɛn kin bɛnd bɔku tɛm ɛn we gɛt smɔl dayamita, lɛk tɛkstayl mashin dɛn.

Di tin dɛn we de ɔp na Jiangsu Aokai Nyu Matirial Tɛknɔlɔji Kɔmni, Ltd.

If yu nid fɔ no mɔ bɔt di ditayl paramita dɛn, aplikeshɔn sɛnɛriɔ ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful-rɛnj prɔdak dɛn, we inklud PTFE ay-tɛmpracha klos, PTFE ay-tɛmpracha tep, PTFE ay-tɛmpracha mɛsh bɛlt, simlɛs fiuzin mashin bɛlt, singl-sayd PTFE kɔt klos, ay-tɛmpracha rɛsistant kɔnvaysɔ bɛlt ɛn ay-tɛmpracha rɛsistant fayvglas klos, duya kɔntakt wi:

·  Savis Hotlayn:Mista. Guo: +86 18944819998 Mista Liu: +86 13705266308 Di wan dɛn we de wok fɔ di kɔmni

Wi de fala di savis filɔsofi ɔltɛm fɔ profeshɔnal ɛn ɔnɛs, ɛn gi yu wan-stɔp sɔlvishɔn ɛn kɔnsidaret savis wit ɔl yu at.