PTFE-coated fiberglass fabric (PTFE-coated glass fiber cloth) hian electronics leh electrical industry-ah hmanna hrang hrang a nei a, a bik takin temperature sang leh hniam (hun rei tak chhunga –196°C atanga 260°C thlenga service, 340°C aia sang thlenga instantaneous resistance nei), electrical insulation tha tak, non-stick property, chemical corrosion laka invenna, friction hniam, leh khaw lum leh khaw vawt laka invenna te a ni. Jiangsu-a PTFE-coated fiberglass fabric siamtute sawi dan chuan, a hmanna bikte chu a hnuaia hmun hrang hrangah hian a innghat a ni:
1. Temperature sang taka insulation leh venhimna
Hei hi core application ber a ni a, PTFE fabric hi Class H (180°C) aia sang insulation material atan hman a ni fo.
- Motor leh Transformer: Motor-a inter-turn insulation, slot insulation, leh phase-to-phase insulation atan hman a ni a, transformer-a layer leh end insulation atan hman a ni a, temperature sang leh voltage sang tak tak tuar thei a ni.
- Coil Insulation: Electromagnetic coil wrapping leh lead wire insulate nan hman a ni a, tape pangngai aiin toughness leh insulation property a sang zawk daih.
- Electric Heating Equipment: Electric heating coil leh heating tube-a isolation layer atan hman a ni a, thermal conduction, insulation, leh anti-sticking functions a pe a, equipment service life pawh a ti rei thei hle.
2. Copper-Clad Laminate leh PCB siam chhuah
PCB lamination process-a hman theih tur thil pawimawh tak a ni a, 'lamination release fabric' emaw 'release cloth.' tia hriat a ni.
- Release leh Cushioning: Steel plate leh copper foil inkar ah dah a ni a, chu chuan epoxy resin chu steel plate-ah a innghat lo va, a ti bawlhhlawh lo va, chutih rualin heat leh pressure chu a inang tlangin a transfer a, lamination laiin white spot leh slippage ang chi defect te a ti tlem bawk.
- Clean Conveying: A non-stick property hmang tangkaiin prepregs (PP sheets) leh copper-clad laminates te vawn nan a hmang a, dust adsorption a veng a, board surface thianghlim tak a awm theih nan a hmang bawk.
3. Electronic hmanga Soldering tih dan tur
A non-stick property tha tak leh temperature resistance hmangin soldering quality a awm theih nan.
- Solder Masking: Wave soldering emaw reflow soldering emaw-ah chuan fixture emaw workpiece emaw-ah a khuh a, chu chu rangkachak finger leh connector ang chi hmun, soldering ngai lote venhimna atan a ni a, solder a stick loh nan.
- Conveyor Belts: Reflow oven leh wave soldering conveyor hmanruaa hman tur mesh belt lian lo tak emaw flat belt emaw siam a ni a, precision electronic components a keng tel a, solder a nghet chuan tihfai awlsam tak a ni.
- Soldering Workstation Mats: Repair emaw manual soldering emaw laiin workbench-ah dah a ni a, heat resistance, non-stick solder property, leh flame retardancy a pe a, hnathawhna hmun a fai reng a ni.
- Hot Air Gun Protective Covers: IC desoldering hunah a chhehvel components te lumnain a tihchhiat loh nan hot air gun nozzle-ah khuh a ni.
4. Cable leh Wiring Harness Industry te a ni
- High-Temperature Cable Wrapping Tape: Cable-te tana insulating shielding layer leh thermal barrier atan hman a ni a, a bik takin aerospace leh automotive engine ang chi temperature sang hmun inkharkhip-a wiring harness siamna atan a tha hle.
- Thermal Sleeves leh Fireproof Covers: Cable leh hydraulic line sensitive te radiant heat leh flying solder spatter laka ven nan removable sleeve, curtain, leh cover-ah te siam a ni.
- Heat-Shrink Tubing Expansion Processing: Heat-shrink tubing tihzauh leh siam danah high-temperature section conveyor belt emaw isolation pad atan hman a ni.
5. Anti-Static leh Cleanroom hman dan tur
PTFE coating-ah hian conductive materials dah belh a nih chuan anti-static PTFE-coated fiberglass fabric siam theih a ni.
- Cleanroom Padding: Dust-free workshop-a conveyor belt, protective curtain, leh workstation mat atan hman a ni a, temperature sang tak laka invenna, leivut laka innghah lohna, leh surface static electricity tha taka tihbo theihna a ni.
- Semiconductor leh Photovoltaic siamna: Solar cell soldering machine-a high-temperature conveyor belt atan hman a ni a, chubakah semiconductor wafer processing-a clean-environment isolation leh anti-sticking consumables atan hman a ni bawk.
6. High-Frequency Inbiakpawhna hmanrua
PTFE-coated fiberglass puan hi high-frequency copper-clad laminates (PTFE-based substrate) siamna atana reinforcing material bulpui ber a ni. Dielectric constant a hniam leh dissipation factor a hniam em avangin 5G base station antenna, radar, satellite communication, leh high-frequency connector te tana raw material pawimawh tak a ni.
