PTFE-coated fibreglass fabric (PTFE-coated glass fibre cloth) bɛ baara kɛ cogo caman na ɛntɛrinɛti ni kuran baarakɛyɔrɔw la, a bɛ tali kɛ kosɛbɛ a ka se ka funteni caman ni funteni dɔgɔya (baara kuntaalajan min bɛ bɔ –196°C ɲɔgɔn na ka se 260°C ma, ni a bɛ se ka wuli yɔrɔnin kelen fo ka se 340°C sanfɛ), kuran sɔgɔli ɲuman, a tɛ nɔrɔ nafaw, kemikɛlifɛnw sɔgɔli, sɔgɔsɔgɔninjɛ dɔgɔya, ani waati cogoya. Jiangsu dugu kɔnɔ, fini minnu dilannen don ni PTFE ye, olu dilannikɛlaw ka fɔ la, baara kɛrɛnkɛrɛnnenw bɛ kɛ nin yɔrɔ ninnu na:
1. Furakɛcogo min bɛ funteni caman na ani a lakanani
Nin ye baarakɛcogo koloma ye, ni PTFE fini bɛ kɛ tuma caman na i n’a fɔ fɛn min bɛ kɛ ka fɛnw tanga, o hakɛ bɛ tɛmɛ H (180°C) kan.
- Motɛriw ni Transformɛriw : A bɛ kɛ i n’a fɔ ɲɔgɔndan ni ɲɔgɔn cɛ fɛnw, slot insulation, ani phase-to-phase insulation motɛriw kɔnɔ, ka fara layɛrɛ ni laban insulation kan transformateurw kɔnɔ, minnu bɛ se ka funteni caman ni tension caman sigidaw muɲu.
- Bobine Insulation : A bɛ kɛ ka kuran bobinew siri ani ka plɔmu filiw siri, ni gɛlɛya ni insulasi cogoya ka bon kosɛbɛ ka tɛmɛ kaseti gansanw kan.
- Kuran funteniminɛnw : A bɛ kɛ i n’a fɔ danfaralan kuran tasumabɔlanw ni tasumabɔlanw kɔnɔ, ka funteni jiginni, insulasi, ani anti-sticking baarakɛcogo di, ka minɛnw baara waati janya kosɛbɛ.
2. Laminati ni PCB dilanni min bɛ kɛ ni nɛgɛ ye
O ye fɛn ye min tɛ se ka dun PCB laminiko la, min bɛ wele ko 'lamini bɔli fini' walima 'labɔli fini.'.
- A bɔli ni a sɔgɔli : A bɛ bila nɛgɛdaga ni nɛgɛdaga cɛ walasa epoyi resin kana nɔrɔ nɛgɛdaga la ani k’a nɔgɔ, ka sɔrɔ ka funteni ni degun bila ɲɔgɔn na, o bɛ dɔ bɔ fiɲɛw la i n’a fɔ nɔ finmanw ani sɛgɛn laminini waati.
- Clean Conveying : Ka baara kɛ n’a ka non-stick properties ye, a bɛ kɛ ka prepregs (PP sheets) ni copper-clad laminates minɛ, ka buguri bali ka don a la ani ka board surface saniyalen sabati.
3. Elektɔriki ka solder (soldering) kɛcogo
Baara kɛli n’a ka fɛn ɲumanw ye minnu tɛ nɔrɔ ani minnu bɛ se ka funteni kɛlɛ walasa ka solder (solder) kɛcogo ɲuman sabati.
- Solder Masking : Wave soldering walima reflow soldering na, a bɛ siri fɛnw na walima baarakɛminɛnw na walasa ka yɔrɔw lakana i n’a fɔ sanu bolokɔniw ani ɲɔgɔndan minnu tɛ soldering wajibiya, o bɛ solder bali ka nɔrɔ.
- Conveyor Belts : A bɛ kɛ ka kɛ mesh belts misɛnninw ye walima flat belts walasa ka baara kɛ ni reflow ovens ni wave soldering conveyor equipment ye, ka taa ni elektɔriki fɛnw ye minnu bɛ kɛ ka ɲɛ, ni saniya ka nɔgɔn ni solder nɔrɔlen don.
- Soldering Workstation Mats : U bɛ bila baarakɛyɔrɔw kan dilan walima bolola soldering waati, o bɛ funteni kunbɛn, solder tɛ nɔrɔ, ani ka tasuma bali, ka baarakɛyɔrɔ saniya.
- Fiɲɛ sumalen marifa lakanani datugulanw : U bɛ siri fiɲɛ suma marifaw dawolo la walasa ka funteni tiɲɛni bali lamini yɔrɔw la ni u bɛ ICw bɔ.
4. Kabɔri ni Wiring Harness Industri
- Kabali sirilan min bɛ funteni caman na : A bɛ kɛ i n’a fɔ kabali sirilan ye min bɛ fɛnw tanga ani ka funteni barika sɔrɔ kabaliw la, kɛrɛnkɛrɛnnenya la, a bɛnnen don wiring harnesses ma yɔrɔw la minnu datugulen don funteni caman na i n’a fɔ sanfɛla ni mobili motɛriw.
- Bolo sumalenw ni datugulanw : U sirilen don bololanɛgɛw la minnu bɛ se ka bɔ, ridow, ani datugulanw walasa ka kabali nɔgɔlenw ni jibolisiraw tanga funteni yeelenma ma ani solder wulilenw ma.
- Funteni-minɛnw falenni baara : A bɛ kɛ i n’a fɔ funteni-yɔrɔ-ko-minɛn walima isolation pad funteni-sɔrɔ-tubabuw bonya ni u cogoya waati.
5. Anti-Static ani Cleanroom baarakɛcogo
Ni fɛnw farala PTFE finimugu kan, fini min bɛ kɛ ni PTFE ye, o bɛ se ka kɛ fibreglasi fini ye min bɛ se ka wuli.
- Saniyaso Padding : A bɛ kɛ i n’a fɔ fɛnɲɛnamafagalanw, lakanani ridow, ani baarakɛyɔrɔw matarafalenw baarakɛyɔrɔw la minnu tɛ buguri ye, ka funteni caman kɛlɛ, ka nɔrɔ buguri la, ani ka kuran jɔlen bɔ yɔrɔ la ka ɲɛ.
- Semikɔndukiri ni fototalan dilanni : A bɛ kɛ i n’a fɔ funteni caman bɛ taa ni fɛnw ye minnu bɛ tile selilɛri solder masinw na, ka fara sigida saniyalenw danfara ni fɛnw kan minnu tɛ nɔrɔ ɲɔgɔn na semikɔndukiri wafer baarakɛcogo la.
6. Kumaɲɔgɔnya minɛn minnu bɛ kɛ ni fɛn caman ye
Fibre de verre fini min dilannen don ni PTFE ye, o ye barikalan jɔnjɔn ye min bɛ kɛ ka laminatiw dilan minnu bɛ kɛ ni nɛgɛ ye minnu bɛ kɛ ni frequence caman ye (substrats basigilen PTFE). K’a sababu kɛ a ka dielektriki sabatili dɔgɔyali ye ani a ka dissipation factor dɔgɔyalenba, a ye 5G basigiyɔrɔ antɛniw, rada, sateliti kumaɲɔgɔnya, ani fɛnɲɛnɛma caman ɲɔgɔndanw ka fɛn fɔlɔ ye.
N’aw b’a fɛ ka kunnafoni caman sɔrɔ an ka fɛn dilannenw bɛɛ lajɛlen ka paramɛtiriw ɲɛfɔlenw kan, u kɛcogo, ani u ladilancogo suganditaw kan—i n’a fɔ PTFE-coated fibreglas fabric, PTFE-coated fibreglas tape, PTFE-coated fibreglas mesh belts, adhesive-bonded seamless belts, single-sided PTFE fabric, high-temperature resistant conveyor cɛsirilanw, ani fibreglasi fini min bɛ se ka funteni caman kɛlɛ—aw ka aw yɛrɛ siga ka kuma an fɛ:
An bɛ baarakɛcogo hakilila min bɛ tali kɛ baarakɛlaw ni danbe la tuma bɛɛ, wa an b’an yɛrɛ di ka fɛɛrɛw di aw ma yɔrɔ kelen na ani baara min bɛ kɛ ni hakili ye!
