Dɛn ne ntama a wɔde fiberglass a wɔde PTFE akata so no di dwuma wɔ ɛlɛtrɔnik ne anyinam ahoɔden adwumayɛ mu?

PTFE-coated fiberglass ntama (PTFE-coated glass fiber ntama) wɔ dwumadie ahodoɔ pii wɔ ɛlɛtrɔnik ne anyinam ahoɔden adwumayɛ mu, titire no ɛde ne ho to ne ahoɔden a ɛko tia ɔhyeɛ a ɛkorɔn ne deɛ ɛba fam (bere tenten som a ɛfiri bɛyɛ –196°C kɔsi 260°C, a ɛko tia ntɛm ara kɔsi boro 340°C), anyinam ahoɔden a ɛkyɛn so, ɛnyɛ nea ɛba fam su ahorow, nnuru a ɛko tia nsɛe, akisikuru a ɛba fam, ne wim tebea a ɛko tia. Sɛnea wɔn a wɔyɛ fiberglass ntama a wɔde PTFE akata so wɔ Jiangsu kyerɛ no, wɔde di dwuma pɔtee no wɔ mmeae a edidi so yi:

 

1. High-Temperature Insulation ne Ahobammɔ

 

Eyi ne ade titiriw a wɔde di dwuma, a wɔtaa de PTFE ntama di dwuma sɛ ade a wɔde siw mframa ano a wɔakyerɛ sɛ ɛboro Class H (180°C).

 

- Motors ne Transformers: Wɔde di dwuma sɛ inter-turn insulation, slot insulation, ne phase-to-phase insulation wɔ motors mu, ne layer ne end insulation wɔ transformers mu, a ɛtumi gyina ɔhyew a ɛkorɔn ne ahoɔden a ɛkorɔn ano.

- Coil Insulation: Wɔde kyekyere electromagnetic coils ne insulating lead wires, a toughness ne insulation su a ɛkorɔn koraa sen teyp a ɛyɛ mpapahwekwa.

- Electric Heating Equipment: Wɔde di dwuma sɛ isolation layer wɔ electric heating coils ne heating tubes mu, ɛma thermal conduction, insulation, ne anti-sticking dwumadi ahorow, yiye trɛw mfiri service nkwa nna mu.

 

2. Kɔbere-Clad Laminate ne PCB Manufacturing

 

Ɛyɛ ade a ɛho nhia a wɔde di dwuma wɔ PCB lamination nhyehyɛe no mu, a wɔfrɛ no 'lamination release fabric' anaa 'release cloth.'

 

- Release ne Cushioning: Wɔde si dadeɛ mprɛte ne kɔbere foil ntam sɛdeɛ ɛbɛyɛ a epoxy resin rentumi nkɔbata dadeɛ mprɛte no ho na ɛnyɛ fĩ, berɛ a ɛde ɔhyeɛ ne nhyɛsoɔ kɔ baabi foforɔ pɛpɛɛpɛ, na ɛtew sintɔ te sɛ nsensaneeɛ fitaa ne slippage berɛ a wɔreyɛ lamination.

- Clean Conveying: Leveraging ne non-stick properties, wɔde di dwuma de kura prepregs (PP nkratafa) ne kɔbere-clad laminates, siw mfutuma adsorption na hwɛ hu sɛ ɛho tew board surface.

 

3. Ɛlektrɔnik Soldering Nneɛma a Wɔde Yɛ Adwuma

 

Wɔde ne non-stick su a ɛkyɛn so ne ɔhyew a ɛko tia di dwuma de hwɛ hu sɛ soldering yɛ papa.

 

- Solder Masking: Wɔ wave soldering anaa reflow soldering mu no, wɔde kyekyere fixtures anaa workpieces ho de bɔ mmeae te sɛ sika kɔkɔɔ nsateaa ne connectors a enhia soldering ho ban, na ɛmma solder ntumi nkɔ so.

- Conveyor Belts: Wɔyɛ no nketewa-sized mesh belts anaasɛ flat belts a wɔde di dwuma wɔ reflow ovens ne wave soldering conveyor mfiri, soa pɛpɛɛpɛ ɛlɛtrɔnik afã horow, a ɛnyɛ den sɛ wɔbɛhohoro sɛ solder bata ho.

- Soldering Workstation Mats: Wɔde si adwumayɛbea benkyi so bere a wɔresiesie anaasɛ wɔde nsa reyɛ solder, na ɛma ɔhyew a ɛko tia, solder a ɛnyɛ nea ɛbata so, ne ogya a ɛmma ogya ntumi nkɔ mu, na ɛma adwumayɛbea no ho tew.

- Hot Air Gun Protective Covers: Wɔde abɔ mframa a ɛyɛ hyew atuo no nozzles ho na wɔasiw ɔhyew a ɛsɛe nneɛma a atwa ho ahyia no ano bere a wɔrebɔ IC ahorow no.

 

4. Cable ne Wiring Harness Nnwuma

 

- High-Temperature Cable Wrapping Tape: Wɔde di dwuma sɛ insulating shielding layer ne thermal barrier ma cables, titiriw fata ma wiring harnesses wɔ confined high-temperature mmeae te sɛ aerospace ne kar engine.

- Thermal Sleeves ne Fireproof Covers: Wɔapam no wɔ sleeves, curtains, ne covers a wotumi yi mu mu de bɔ nhama a ɛyɛ mmerɛw ne hydraulic lines ho ban fi ɔhyew a ɛhyerɛn ne flying solder spatter ho.

- Heat-Shrink Tubing Expansion Processing: Wɔde di dwuma sɛ ɔhyew a ɛkorɔn ɔfã conveyor belt anaasɛ isolation pad bere a ntrɛwmu ne shaping nhyehyɛe a ɔhyew-shrink tubing.

 

5. Anti-Static ne Cleanroom Nnwuma a Wɔde Di Dwuma

 

Ɛdenam nneɛma a ɛma nsu fa mu a wɔde bɛka PTFE a wɔde kata so no so no, wobetumi ayɛ ntama a wɔde fiberglass a wɔde akata so a ɛko tia PTFE.

 

- Cleanroom Padding: Wɔde di dwuma sɛ conveyor belts, ahobammɔ ntama, ne adwumayɛbea mats wɔ adwumayɛbea ahorow a mfutuma nnim mu, ɛma ɔhyew a ɛkorɔn a ɛko tia, ɛnyɛ nea ɛbata mfutuma ho, na ɛma anyinam ahoɔden a ɛnyɛ adwuma a ɛwɔ soro no sɛe yiye.

- Semiconductor ne Photovoltaic Manufacturing: Wɔde di dwuma sɛ ɔhyew a ɛkorɔn conveyor belts wɔ owia nkwammoaa soldering mfiri, ne afei nso clean-atwa yɛn ho ahyia isolation ne anti-sticking consumables wɔ semiconductor wafer dwumadie mu.

 

6. Nkitahodi Mfiri a Ɛwɔ Mpɛn pii

 

Ntama a wɔde fiberglass adura ho a wɔde PTFE akata so ne ade titiriw a ɛhyɛ den a wɔde yɛ laminates a wɔde kɔbere adura ho a ɛyɛ frequency kɛse (PTFE-based substrates). Esiane sɛ dielectric constant a ɛba fam ne dissipation factor a ɛba fam koraa nti, ɛyɛ ade titiriw a wɔde yɛ 5G base station antennas, radar, satellite nkitahodi, ne high-frequency connectors.

 

--- .

 

Nsɛm a ɛwɔ atifi hɔ no, wɔde mae Jiangsu Aoke Nneɛma Foforo Mfiridwuma Co., Ltd.

 

Sɛ wopɛ sɛ wusua pii fa parameters a ɛkɔ akyiri, application scenarios, ne customization options ma yɛn nneɛma nyinaa —a nea ɛka ho ne PTFE-coated fiberglass ntama, PTFE-coated fiberglass tape, PTFE-coated fiberglass mesh belts, adhesive-bonded seamless belts, single-sided PTFE ntama, high-temperature resistant conveyor abɔso, ne fiberglass ntama a ɛko tia ɔhyew kɛse—yɛsrɛ sɛ ntwentwɛn wo nan ase sɛ wobɛka yɛn ho asɛm:

 

Ntrɛwmu a wɔde frɛ nkurɔfo:  

Owura Guo: 18944819998  

Owura Liu: 13705266308  

 

Yɛkura ɔsom nyansapɛ a ɛfa adwumayɛfoɔ ne nokwaredi ho akyi berɛ biara, na yɛatu yɛn ho ama sɛ yɛde ano aduru a ɛwɔ baabi baako ne ɔsom a wɔde aso tie bɛma wo!