Misa i-PTFE Tape Layers ekubeni iNcama ngexesha loGcino: Uyilo lweTension yeGradient Wining

Uvula umqulu omtsha we Iteyiphu ye-PTFE yobushushu obuphezulu - kodwa iileya zibambene kunye. Xa uziqhekeza, ukudluliselwa kwe-adhesive kwi-non-stick back side, yonakalisa i-tape. Oku kubizwa ngokuba yi-interlayer adhesion okanye ibhlokhi.

Kwenzeka ngexesha lokugcinwa kwexesha elide, ngakumbi kwiimeko ezifudumeleyo okanye xa ii-rolls zipakishwe. Isizathu yindibaniselwano yezinto eziphathekayo (imemori ye-PTFE ye-elastic, i-silicone ye-PSA i-creep) kunye nezinto zangaphandle (ubushushu, uxinzelelo).

I-Aokai PTFE iyisombulule le nto ngoyilo loxinzelelo lomoya -ubuchule bokuvelisa obusebenzisa uxinezeleko oluqhubekayo olusuka kumphandle ukuya kumaleko angaphakathi. Esi sikhokelo sichaza ukuba kutheni ukubhloka kwenzeka kunye nendlela yokuthintela.

Kutheni i-PTFE Tape Layers zincamathela Ndawonye? Oonobangela

Ukuthintela ukunamathela kwe-interlayer, kufuneka uqonde izizathu ezibini eziphambili: izinto eziphathekayo kunye neemeko zokugcina zangaphandle.

1. Iimpawu eziphathekayo ezisebenza ngokuchasene nawe

• Imemori ye-elastiki yefilimu ye-PTFE: Ngexesha lemveliso, i-PTFE yamatsheyina emolekyuli ayoluliwe. Xa igcinwe kwifom eqengqelekayo phantsi koxinzelelo ixesha elide, uxinzelelo lwangaphakathi lukhululwa. Ifilimu izama ukubuyela kwisimo sayo sokuqala, ibangela ukuba i-tape igobe okanye i-adhesive ikhuphe.

• I-Silicone ye-PSA erhubuluzayo: I-silicone encamathelayo enobuthathaka boxinzelelo yi-semi-fluid. Ngaphantsi kobushushu obuqhubekayo kunye noxinzelelo, ihamba ngokucothayo (i-creeps), ingena kwi-non-stick back side kwaye ibangele iileya ukuba zibophe.

2. Izinto zokugcina zangaphandle ezikhawulezisa ukuvimba

• Ubushushu: Ngaphezulu kwe-40 ° C, ukuhamba kwe-adhesive kukhawuleza ngokukhawuleza. Ubushushu buthambisa iPSA.

• Ukufuma: Ukufuma okuphezulu kunokubangela i-adhesive hydrolysis, yenze umphezulu ube tacky.

• Uxinzelelo lweMechanical: Ukupakisha imiqulu enzima phezu komnye kucinezela umaleko wokuncamathelisa kwicala elingasemva, ukunyanzela ukuncamathela okusisigxina ngokomzimba.

Isisombululo – iGradient Wining Tension Design

Undoqo wothintelo kukulawula uxinezeleko ngexesha lokuvelisa. Umgaqo ulula: uqiniswe kwimigangatho yangaphandle, ukhulule kwimigangatho yangaphakathi.

H3: Kutheni i-gradient tension isebenza

Ukuba umqulu wonke unenxeba kunye noxinzelelo oluphezulu oluqhubekayo, iileya zangaphakathi ezikufutshane namava angundoqo agcina amandla oxinzelelo iinyanga okanye iminyaka. Olo xinzelelo lutyhala i-adhesive kwi-PTFE ngasemva, ibangela ukuvala.

Ngoxinzelelo lwegradient:

• Iileya zangaphandle zonakaliswe ngokuqinileyo - zidinga uxinezeleko ukuze zihlale zibambene.

• Iileyile zangaphakathi (kufuphi nombindi) zinxenxekeka - ziba noxinzelelo oluncinci lwentsalela.

• Isiphumo: Undoqo awuzange ube phantsi koxinzelelo olwaneleyo lokubangela ukunamathela, nasemva kokugcinwa ixesha elide.

1. Iphunyezwa njani - ulawulo loxinzelelo oluvaliweyo

I-Aokai PTFE isebenzisa inkqubo yolawulo loxinzelelo oluvaliweyo enamacandelo amathathu:

Uxinzelelo lwehla kancinci ukusuka kwiringi yangaphakathi ukuya kwiringi yangaphandle. Oku kukwanqanda iiroli eziqinileyo (apho iileya zangaphakathi zixinene kwaye kunzima ukuzikhulula).

Amanyathelo oThintelo oluBanzi -Ngaphaya koKugquma

Uxinzelelo lwegradient sisisombululo esingundoqo, kodwa sisebenza kakuhle xa sidityaniswa namanye amanyathelo okuvelisa kunye nokugcinwa.

1. Ukulungiswa kwecala lemveliso

2. Iimfuno zokugcina - gcina iimeko phantsi kolawulo

• Iqondo lobushushu: Lizinzile phakathi kwe -15 ° C kunye ne-40 ° C (ilungile 15-25 ° C). Yiphephe imithombo yobushushu.

• Ukufuma okuhambelanayo: 30% - 70% RH . Ukoma kakhulu kunokubangela ukuma; ukubamanzi kakhulu kunokubangela i-hydrolysis.

• Ukukhanya: Zigcine kude nelanga elithe ngqo (i-UV iyonakalisa iglu ngokuhamba kwexesha).

• Imichiza: Gcina kude kwizinyibilikisi, iiasidi, kunye neealkali.

3. Ukuphatha kunye nokupakisha imithetho

• Beka imiqulu ngokuthe tye (kwicala labo). Ukusonga akuvumelekanga.

• Sebenzisa iiracks zokugcina ukugcina isambuku ukukhusela uxinzelelo olugqithisileyo kwimiqulu engezantsi.

• Jikelezisa iiroli ngekota - tshintsha izikhundla ezigxininisiweyo ukukhulula uxinzelelo lwexesha elide.

• Gcina ukupakishwa koqobo - ukuba konakele, phinda utywine ngokukhawuleza ngefilimu yeplastiki.

IsiShwankathelo-Ubunyusa njani ubomi boGcino lwe-PTFE Tape

I-Aokai PTFE yenza i-PTFE iiteyiphu zobushushu obuphezulu kunye noxinzelelo olujikelezayo lwe-gradient njengomgangatho. Ukugcinwa kwexesha elide (ngaphezu kweenyanga ezi-6), sincoma ukongezelela ukutywina imiqulu kwiingxowa ze-foil kunye ne-desiccant kunye nokugcina kwiimeko ezilawulwa yimozulu.

Ukuba ufumana ukubhloka ngemiqulu esele ikhona, zama ukufudumala i-roll ukuya kwi-30-40 ° C kwiiyure ezimbalwa ngaphambi kokuba ukhulule - i-adhesive ingathambisa ngokwaneleyo ukukhulula ngaphandle kokudlulisa. Kodwa ukuthintela kuhlala kungcono kunokunyanga.

Lo mxholo ungentla unikwe ngu I-Jiangsu Aokai yeZixhobo eziNtsha zeTekhnoloji Co., Ltd.

Sinikezela ngoluhlu olupheleleyo lweemveliso ezibandakanya amalaphu e-PTFE anobushushu obuphezulu, iiteyiphu ze-PTFE ezinobushushu obuphezulu, amabhanti e-mesh e-PTFE, amabhanti angenamthungo oomatshini bokudibanisa, amalaphu e-PTFE asecaleni elinye, amabhanti okuhambisa anobushushu obuphezulu kunye namalaphu e-fiberglass. Nceda uzive ukhululekile ukuqhagamshelana nathi malunga neeparitha zemveliso eneenkcukacha, isikhokelo sokusetyenziswa kunye nezisombululo ezilungiselelwe.

Iinkcukacha zoqhakamshelwano

• Mnu. Guo: +86 18944819998

• UMnu. Liu: +86 13705266308

Siyayixhasa imfundiso yenkonzo yobungcali kunye nemfezeko, kwaye sizabalazela ukunikezela ngezisombululo eziphuma kwindawo enye kunye neenkonzo ezinolwazelelelo kubo bonke abathengi.