NgeeMeko eziBabekileyo kunye nokuSebenza okuGqibeleleyo
uMvelisi wakho othembekileyo wePTFE Film Tape

UKhawulezisa ukuhamba komsebenzi: Umphezulu ongeNgxongo, uSebenza oluKhawulezay

ULinyusa ixabiso: Inkunkuma encinci, iNzuzo ephezulu

CELA ISICATSHULWA

Ekhaya » Iimveliso » I-PTFE i-Adhesive Tape » Iteyiphu yefilimu ye-PTFE » Iteyiphu ebomvu ye-PTFE

ITape ye-PTFE ebomvu

I-Red PTFE Tape ikwabizwa ngokuba yi-PTFE Adhesive Tape.

1.Lo mphezulu unepropathi efanelekileyo yokungancamatheli kunye nokutyibilika;
2.Ukufakwa kakuhle kombane;
3.Inokusetyenziswa kuluhlu olubanzi lwamaqondo obushushu;
4.Ukunganyangeki kakuhle kwamandla ombane;
5.Izatifikethi: ISO 9001:2015, FDA;
6.Inkonzo egqwesileyo kunye nenkxaso ebandakanya ukuthengiswa kwangaphambili, kwintengiso & emva kwentengiso;
7.Yamkela ukwenza ngokwezifiso;
Inkonzo ye-8.OEM/OBM.


Ubukho:



Buza

Iteyiphu ye-PTFE ebomvu I-PTFE i-Adhesive Tape

Udidi lweMveliso

Ingcaciso yeMveliso

Iteyiphu ye-PTFE ebomvu yenzelwe ngokukodwa usetyenziso oluphezulu olufuna ibhondi eyomeleleyo, ethembekileyo, rhoqo kwiindawo apho ukuqina nokomelela kubalulekile.

Iimpawu zeMveliso ye-Red PTFE tape

Umbala obomvu uyahlula kumhlophe oqhelekileyo okanye ezinye iiteyipu ze-PTFE, umbala obomvu obomvu unceda ngokubonakala ngexesha lesicelo, okwenza kube lula ukuphatha kunye nokubeka.

Usetyenziso lwe -Red PTFE tape

● Ingalanywa ngeentsimbi, iiplastiki kunye neeseramikhi njengezinto eziqhelekileyo zokutyibilika.

● Iibhanti ezingapheliyo ze-polyethylene laminators

● Ukusonga umqulu we-polyethylene laminators

● Ukufakwa kweekhoyili njengesixhobo sokugquma seklasi H.

IiParameters zobuGcisa be -Red PTFE tape

Ikhowudi yemveliso

Ubukhulu bubonke mm

Ububanzi obusemgangathweni mm(ngaphakathi)

Ubukhulu bobubanzi mm(ngaphakathi)

Ubude m

MR

0.1

10,13,19,25,30,38,50

500

10-33

Umenzi weTape ye-PTFE ebomvu

I-Aokai PTFE igxile ekuboneleleni ngelaphu elikumgangatho ophezulu le-PTFE elakhiwe ngefiberglass kunye namanqanaba enkonzo agqwesileyo. Siyi-PTFE yobuchwephesha abavelisa ilaphu le-fiberglass eqatywe iza kukunceda kwezi ndawo zilandelayo: imathiriyeli esisiseko, umgangatho wemveliso ogqityiweyo, ukuhanjiswa, kunye nenkonzo yasemva kokuthengisa. I-Aokai ikubonelela ngevenkile, ukwenza ngokwezifiso, uyilo, ukupakishwa, izisombululo zeshishini, kunye nezinye iinkonzo ze-OEM OBM. Iqela lethu le-R&D yobuchwephesha, iqela lemveliso, iqela lokuhlola umgangatho, iqela lenkonzo yobugcisa, kunye neqela lenkonzo yokuthengisa kwangaphambili kunye neqela lenkonzo emva kokuthengisa liya kukunika inkonzo yokumisa enye, ukonga ixesha lakho kunye nokuqinisekisa owona mgangatho wemveliso yobuchwephesha.

Amaqabane eNtsebenziswano

Ungayithenga phi i-Red PTFE tape?

Ukuba unayo nayiphi na imibuzo malunga neRed PTFE tape , nceda ungathandabuzi ukuqhagamshelana nathi apha mandy@akptfe.com . Siza kubonelela ngolwazi olucacileyo kunye nenkxaso yobugcisa malunga neempawu zemveliso, ukucaciswa, izisombululo kunye neendlela zokwenza ngokwezifiso ... Wamkelekile ukuba u tyelele ifektri yethu!

Ngemibuzo okanye ukwenza iodolo, nceda Qhagamshelana nathi.

Q Ndinga-odola ububanzi okanye ubude besiko?

A Ewe. Sinikezela ngobubanzi besiko, ubukhulu, kunye nobude bokuqengqeleka ukulingana nenkqubo yakho. Qhagamshelana neqela lethu lezentengiso kunye neenkcukacha zakho kunye nobungakanani obyobugcisa ebanzi kunye nesakhono esithembekileyo sonikezelo lwehlabathi. Qhagamshelana neengcali zethu zobugcisa ku
Q Ndiyigcina kwaye ndiyiphathe njani iteyiphu?

A Gcina kwindawo epholileyo, neyomileyo kude nelanga elithe ngqo kunye nemithombo yobushushu. Kuphephe ukuba sesichengeni sokufuma ixesha elide. Gcina umqulu kwipakethe yayo yokuqala xa ingasetyenziswa.
Q Lithini ixesha eliqhelekileyo lokukhokela?

Iimveliso eziqhelekileyo zithunyelwa ngenqanawa phakathi kweentsuku ze-7 zokusebenza emva kokuqinisekiswa komyalelo; iinketho zesiko zinokuthatha ixesha elide. Siza kuqinisekisa ixesha eliqinisekileyo lokukhokela nawe kwi-odolo.
Q Ngaba i-adhesive silicone-based, acrylic, silicone-acetate?

A I-adhesive isekelwe kwi-silicone, nangona kunjalo, umthengi unokwenza ngokwezifiso i-tape esekelwe kwi-acrylic, enika ukunamathela okuphezulu.
Q Yintoni umahluko phakathi kwe-PTFE iteyiphu yokuncamathelisa abicah kunye ne-PTFE ye-acrylic tape?

A
Ukusebenza kobushushu

● Isincamathelisi seSilicone:

Uzinzo olugqwesileyo lobushushu obuphezulu kwaye luhlala luguquguquka kumaqondo obushushu aphantsi; ilungele ukukhwela ibhayisekile nge-thermal kunye ne-gaskets / seal.

● Ukuncamathelisa ngeAkriliki:

Ukusebenza kakuhle kweqondo lokushisa elipheleleyo kodwa ngokubanzi akulula njenge-silicone; inokuba brittle ngakumbi kumaqondo obushushu aphantsi kakhulu okanye ithambe kumaqondo obushushu aphezulu.

Ukumelana neekhemikhali kunye nokusingqongileyo

● Isincamathelisi seSilicone:

Ukuchasana okugqwesileyo kumswakama, ukuntywiliselwa emanzini, ukuvezwa kwe-UV (ukusetyenziswa kwangaphandle), kunye neekhemikhali ezininzi; igcina ukunwebeka.

● Ukuncamathelisa ngeAkriliki:

Imichiza elungileyo kunye nokuchasana kwe-UV kwiindawo ezininzi kodwa ngokuqhelekileyo kuguquguquka ngaphantsi kwe-silicone; ukumelana nemozulu kuxhomekeke kulwakhiwo.

Ukuba bhetyebhetye vs ubungqongqo

● I-Silicone encamathelayo kwi-PTFE:

Ukubhetyebhetye ngakumbi, kukwazi ukwamkela intshukumo, ukungcangcazela, kunye nokwandiswa kwe-thermal ngaphandle kokuphulukana netywina.

● Ukuncamatheliswa kweAkriliki kwi-PTFE:

Ngokuqhelekileyo iqinile; ukubamba olomeleleyo ekuqaleni kodwa ungaxoleli kangako xa ushukuma; ngcono kwiibhondi eziqinileyo, eziphezulu.

Iimveliso ezinxulumeneyo

White PTFE Tape

Iteyiphu yefilimu ye-PTFE

Amanqaku anxulumeneyo

[I-PTFE i-Adhesive Tape ] Ziziphi iiyantlukwano kwiimpembelelo zokufudumeza kwe-infrared radiation ngokubhekiselele ekufudumeni kwe-hot-air circulation kwi-uniform of the crosslinked structure of the silicone adhesive layer?

Eli nqaku lithelekisa iiyantlukwano phakathi kokufudumeza kwemitha ye-infrared kunye nokufudumeza komoya oshushu kwi-crosslinked structure efanayo ye-adhesive layer ye-silicone. Iindlela zokuhambisa ubushushu: umoya oshushu yi-convection-conduction, ithambile kwaye iqhubela phambili, idala iqondo lobushushu eliphakathi; I-IR kukufunxa ngemitha ngokufunxa okunzulu komphezulu (i-micrometers ukuya kwi-millimeters) idala umnqantsa wokuthambeka komphezulu ukuya ngaphakathi. Iimpembelelo kwi-crosslink density distribution: i-hot-air ivumela iinxalenye zangaphakathi nangaphandle ukuba zingene kuluhlu lobushushu be-vulcanization phantse ngaxeshanye, ukunikezela ukuxinana kwe-crosslink efanayo kunye nobukhulu; I-IR ibangela umaleko womphezulu ukuba unyange ngoko nangoko ukwenza ulusu olushinyeneyo oluthintela ukuhanjiswa kobushushu, nto leyo ekhokelela ekuncipheni okubukhali koxinzelelo lwe-crosslink ukusuka kumphezulu ukuya ngaphakathi.
[I-PTFE i-Adhesive Tape ] Ziziphi iimpembelelo zokulawulwa koxinzelelo lwewebhu ngexesha lenkqubo yokugquma kweTeflon yobushushu obuphezulu kwiteyiphu kwi-flatness ye-PTFE substrate kunye nokufana kwe-adhesive coating?

Eli nqaku liphonononga iziphumo zolawulo loxinzelelo lwewebhu ngexesha leTeflon yobushushu obuphezulu bokugquma kwi-PTFE substrate flatness kunye ne-adhesive coating uniformity. Iimpembelelo kwi-substrate flatness: Ukuxinezeleka okungaphezulu komda we-elastic kubangela ukolula kweplastiki okungaguqukiyo kunye nentamo (ubude be-longitudinal, ukucutha okunqamlezayo), ukwenza ukuthamba, imibimbi kunye neepateni ezinamaza; I-PTFE ichwechwa phantsi koxinzelelo oluqhubekayo iba 'nomkhenkce' emva kokupholisa, ibangele ukungalingani komphezulu; Uxinzelelo olungalinganiyo olunqamlezileyo olusuka kunxunguphalo lwerola ehambelanayo ludala imiphetho egobileyo, amadyungudyungu asembindini, kunye namanqaku axengaxengayo.
[I-PTFE i-Adhesive Tape ] Ipatheni yenguqu kumandla adibeneyo we-adhesive layer of Teflon high-temperature tape emva kokuguga okuphezulu.

Eli nqaku lichaza ipateni yotshintsho kumandla okubambisana kwe-PTFE yobushushu obuphezulu betape yokunamathela emva kokuguga okuphezulu. Ipatheni yezigaba ezintathu: I-post-curing rise up (i-high-temperature exposure ekuqaleni kwe-200-260 ° C, amaqela asebenzayo aseleyo aqhubeka e-crosslink, ukubambisana kwanda kakhulu); Inqanaba elizinzileyo lolungelelwaniso (iindlela zokuwela ukudibanisa ukugqitywa, ubumbano luhlala luzinzile ixesha elide); Ukuthotywa kunye nenqanaba lokuhla (ixesha eligqithisileyo / ubushushu bubangela ukuthotywa kwekhonkco eliphambili, ukuhambelana kuncipha, i-adhesive iyathamba kwaye ibe tacky). Iingcambu ezibangela ukusilela okubambeneyo (ukukrazuka kwangaphakathi kushiya intsalela) kunye nokucudisa ngaphandle (ukuhamba okubandayo okuvela emaphethelweni ngenxa yokuncipha kwemodyuli) ziyahlalutywa.
[I-PTFE i-Adhesive Tape ] Ungaphuculwa njani ukuxhathisa kwe-creep kunye nokuzinza kwexesha elide le-Teflon high-hold-high-temperature tape?

Eli nqaku libonisa iindlela zokuphucula ukuxhathisa kwe-creep kunye nokuzinza kwexesha elide lokubamba iteyiphu ephezulu yobushushu beTeflon. Amaqhinga abandakanya: Ukulungiswa kwe-molecular network topology - i-high MQ silicone resin / gum ratio (1.2: 1-2: 1) ifom ye-hard-phase domains; ukufakwa kwamaqela e-phenyl (20-30 mol%) kuthintela ukuhamba kwekhonkco; ubunzima be-molecular crosslink elawulwa kwi-5,000-15,000 g / mol; I-Gradient modulus multilayer adhesive structure — primer-anchoring layer (1-3μm) ene-silane coupling agent, high-modulus cohesive layer (30-50μm) njenge-shear-resistant skeleton, i-viscoelastic functional layer (3-8μm) yokumanzisa umphezulu; I-Nanofillers - i-silica evuthayo (i-10-25 wt%) enokuguqulwa komphezulu yenza ukuwela ukuguqulwa komzimba.
[I-PTFE i-Adhesive Tape ] Ingaba i-microporous structure inokwakheka njani iTeflon ephefumlayo yobushushu obuphezulu kwiteyiphu yokulinganisela ukufikeleleka komoya kunye nokugquma kunye neempawu ezingabambekiyo?

Eli nqaku lijongana nendlela uyilo lwesakhiwo se-microporous seTeflon ephefumlayo (PTFE) yobushushu obuphezulu beteyiphu ibhalansisa ukufikeleleka komoya kunye nokugquma kunye neempawu ezingabambekiyo. Ungquzulwano olungundoqo: Ukungena komoya kufuna imingxunya evulekileyo, ngelixa ukugquma kufuna ukuxinana kunye nokungancamatheli kufuna umphezulu ogudileyo. Izicwangciso zoyilo olulinganisiweyo: lawula i-avareji ye-pore diameter (0.1-2μm, ngokufanelekileyo <0.5μm) ukuthintela ukungena okunyibilikayo kunye nokugcina umbane wokuphuka; ukulawula i-porosity kwi-50-70% (≈60% ngokufanelekileyo) ukufezekisa i-Gurley 20-100s / 100cc kunye namandla e-dielectric ≥2kV yefilimu ye-0.13mm; amkele i-3D ye-3D yothungelwano oluphezulu lwepore isakhiwo (τ≈2.5-4) ukucinezela imijelo yokukhupha ngokuthe ngqo; Yakha i-asymmetric gradient pore structure kunye ne-asymmetric gradient pore layer (1-5μm) ye-non-stick / insulation kunye ne-porous yangaphakathi yokuphefumla; sebenzisa i-super-oleophobic/hydrophobic surface post-treatment ngaphandle kokuvaleka kwepore.