Fie » Kaseɛbɔ » PTFE Adhesive Tape a wɔde yɛ nneɛma » PTFE Tape wɔ Packaging Ɔhyew Nsɔano: 4 Core Values & Sɛnea Wɔpaw

PTFE Tape wɔ Packaging Ɔhyew Nsɔano: 4 Core Value & Sɛnea Wɔpaw

Nhwɛsoɔ: 0 Ɔkyerɛwfoɔ: Site Editor Bere a wɔde tintimii: 2026-06-04 Mfiase: Beaeɛ

Wɔ ade a wɔde kyekyere nneɛma a ɛkɔ ntɛmntɛm so no, ɔhyew a wɔde siw ano no ne ade a ɛbɔ toa. Bere biara a plastic a ayɛ nwini bɛbata sekan a wɔde hyɛ mu no ho no, nhama no gyae ma wɔde twitwiw – ekum aba. Nsɔano bɔne biara de nkotoku san kɔ ma wɔsan yɛ ho adwuma. Sealing die biara a asɛe no gye mpempem pii sɛ wɔbɛsesa.

Ano aduru no yɛ mmerɛw wɔ nnaadaa kwan so: fa di dwuma PTFE ɔhyew a ɛkorɔn teyp a ɛkɔ nsɔano no ani. Saa fiberglass a wɔde PTFE akata so a ɛyɛ tratraa yi, a wɔde silicone a ɛyɛ hyew kɛse akata so no sesa ɔhyew a wɔde kata so no.

Aokai PTFE de PTFE tape ama wɔn a wɔyɛ nneɛma a wɔde kyekyere nneɛma ne wɔn a wɔde di dwuma awiei mfe pii. Saa asɛm yi ka nneɛma atitiriw anan a wɔde di dwuma ho asɛm – anti-stick release, nnwinnade ahobammɔ, seal quality, ne low friction – ne key selection criteria (substrate, temperature, adhesive, mechanical properties) a ɛbɛboa wo ma woapaw tape a ɛfata ama wo sealing line.

Anan Core Application Values of PTFE Tape wɔ Ɔhyew Nsɔano mu

1. Yi Adhesive Residue – Nkɔso High-Efficiency Production fi hɔ

Eyi ne PTFE tape no mfaso tẽẽ sen biara. Sini ahorow a wɔde kyekyere nneɛma a PE, PP, PET, ne aluminium composite films ka ho no taa yɛ mmerɛw na ɛbata dade a ɛda hɔ kwa a wɔde kata so wɔ ɔhyew ase, na ɛma bag mu paapae, film no tetew, na ɛtaa gyae adwuma de siesie.

Sɛnea PTFE boa: Ahoɔden a ɛba fam koraa wɔ soro (18-20 dynes/cm) pam plastic a ayɛ hyew ne nneɛma a wɔde nkata so a ɛyɛ hyew. Sini no yi kyinhyia biara adi pefee.
Nea afi mu aba: Pow dodow a ɛkɔ fam; mfiri gyinabea bere a wɔde siesie no so tew 80-90%.

2. Bɔ Heat-Sealing Components ho ban – Trɛw nnwinnade nkwa nna mu

Sekan a wɔde hyɛ mu anaasɛ ɔhyew afiri no yɛ dade a wɔde yɛ ade pɛpɛɛpɛ. Bere kɔ so no, friction a efi sini ne nhama a wɔde twa ade mu no ma ɛyɛ mmerɛw, na oxidation/corrosion pits the surface.

PTFE sɛ ade a ɛbɔ ho ban a wotumi di: Teyp no yɛ adwuma sɛ ade a ɛho ka sua, a wotumi sesa. Teyp a wɔbɛsesa no gye simma pii na ɛgye sika ketewaa bi sɛ wɔde toto sɛ wɔbɛsiesie anaa wɔbɛsesa sealing die a wɔayɛ no sɛnea wɔpɛ ($500-$5,000+).
Nea efi mu ba: Nnwinnade a wɔde di dwuma no nkwa nna trɛw kɛse; die replacement intervals no yɛ tenten.

3. Homogenize Ɔhyew Kyekyɛ – Upgrade Nsɔano Nhyiam

Premium fiberglass-reinforced PTFE tape wɔ cushioning ne ɔhyew diffusion su a ɛkɔ fam. Ɛtua nneɛma nketenkete a ɛnteɛ wɔ sekan a wɔde kata so ne sini a wɔde kyekyere nneɛma no ntam wɔ micro level no so.

Sɛnea ɛyɛ adwuma: Teyp no kyekyɛ ɔhyew ne nhyɛso nyinaa pɛpɛɛpɛ wɔ baabi a wɔakata so no.
Nea efi mu ba: Nsɔano a ɛyɛ fɛ, a ɛkɔ so daa a ahoɔden yɛ pɛ – nsɔano a enni mũ biara nni hɔ (ɛtwetwe) anaasɛ ɛhyew boro so (pinholes).

4. Friction Coefficient a ɛba fam – Film a ɛyɛ mmerɛw a ɛde kɔ

PTFE no ultra-low kinetic friction coefficient (μ≈0.05-0.10) som bo sen sealing bar no. Wɔde di dwuma kɛse wɔ mfiri a wɔde yɛ kɔla ne tube nsateaa a wɔde yɛ vertical form fill seal (VFFS) mfiri so.

Mfaso: Ɛtew mmirikatu a ɛko tia sini a wɔde kyekyere nneɛma ho no so; siw sini a ɛtrɛw deformation ano; ɛtew static buildup so (bere a wɔde anti-static grade di dwuma no).
Nea efi mu ba: Sini a wɔde ma a ɛyɛ den, jam kakraa bi.

PTFE_Tape_on_Horizontal_Ɔhyew_Sealer.png

Aokai PTFE de fiberglass-backed PTFE tape titiriw ma ɔhyew nsɔano dwumadie. Yɛn silicone PSA no yɛ crosslinked ma 260°C kɔ so som, a wɔagye atom denam nnɔnhwerew 1,000 ɔhyew onyin sɔhwɛ ahorow a enni adhesive ooze. Black anti-static grade (surface resistance 106-109 Ω) wɔ hɔ ma sini nhama a ɛkɔ ntɛmntɛm.

Adwumayɛ ho Nsɛnkyerɛnne Titiriw – Sɛnea Wɔpaw PTFE Teapɔn a Ɛfata

Ɔhyew a wɔde siw ano no gu ahorow kɛse wɔ adwumayɛ mu hyew, tumi a wɔde mia so, ne mmirikatu ahoɔhare mu. Ɛsɛ sɛ wɔhwɛ sɛ nsɛm a edidi so yi yɛ nokware bere a wɔrepaw no.

1. Substrate Nhyehyɛe & Nneɛma a Ɛyɛ Den

Substrate Ɔkwan a Wɔfa so Yɛ	Thickness Nneɛma a Wɔpaw	Nea eye sen biara Ma
PTFE teyp a wɔde fiberglass ayɛ (wɔde di dwuma kɛse) .	0.13 mm, 0.18 mm, 0.25 mm	General ɔhyew nsɔano
– 0.13 mm na ɛwɔ hɔ	– .	Superior ɔhyew transfer ma ahoɔhare kɛse sealing
– 0.18 mm & nea ɛboro saa	– .	Enhanced wear resistance ne cushioning a wɔde hyɛ mu; fata ma compression a emu yɛ duru, ɔhyew twa, rough-surface sealing nnade
PTFE sini teyp a ɛyɛ den (skived PTFE) .	Ahodoɔ	Nneɛma a wɔhwehwɛ sɛ wɔde gyae nneɛma a ɛwɔ friction a ɛyɛ hare; a ɛba fam a ɛko tia wear/puncture sɛ wɔde toto fiberglass-backed ho a

Afotu a wɔde paw: 0.13 mm anaa 0.18 mm fiberglass tape ma ɔhyew a wɔde kata so daa; upgrade to 0.25 mm ma mpɛn pii twitwa tebea horow a ɛyɛ mmerɛw sɛ teyp sɛe (sɛ nhwɛso no, nhama a sealing sekan nso twa sini no).

2. Ɔhyew Resistance & High-Ɔhyew Release Gyinabea

Parameter a wɔde kyerɛ	Ahwehwɛde	Adɛn
Ɔhyew a ɛkɔ so yɛ adwuma	-70°C kosi 260°C	Kata ɔhyew-a wɔde siw ano a wɔtaa de di dwuma (120-220°C) so .
Ɔhyew a ɛsen biara ntɛm ara	≥300°C (titiriw) .	Pulse sealing ne hot cutting betumi aboro 300°C bere tiaa bi – ɛsɛ sɛ wɔkwati scorching anaa carbonization
Bere tenten a wɔde gyae nneɛma a ɛyɛ den	PTFE emulsion a ɛyɛ fɛ yiye	Low-grade PTFE coating hu amane resin migration ne degraded anti-stick adwumayɛ wɔ bere a ɛkɔ so kɛse ɔhyew ase

3. Adhesive Type – Silicone PSA yɛ nea wontumi nsusuw ho

Wɔnam adhesive no so na ɛkyerɛ sɛnea teyp a wɔawie no yɛ adwuma hyew sen biara – ade titiriw a ɛde huammɔdi ntɛm.

Adhesive Type a Wɔde Yɛ Nneɛma	Ɔhyew a Ɛko Tia	Ɛfata ma Ɔhyew a Wɔde Sie
Silicone PSA (wɔpɛ) .	≥260°C na ɛwɔ hɔ	✅ Ɛkura adhesion a ɛyɛ den wɔ ɔhyew a ɛkorɔn mu, embrittlement biara nni hɔ, nkae kakraa bi wɔ bere a wɔayi afi hɔ akyi
Acrylic PSA a wɔde yɛ adwuma	150-180°C na ɛyɛ nea wɔtaa yɛ	❌ Ɛtaa ba adhesion huammɔdi, bubbling, residual glue overflow boro threshold – nkutoo ma low-temp anaa dan-temperature applications

Peel adhesion ahwehwɛde: Minimum mfiase tack ≥8 N / 25 mm (dade a ɛnyɛ den) hwɛ hu sɛ tight lamination wɔ smooth sealing dade a enni ano curling anaasɛ shifting wɔ ɔhyew ne nhyɛso ase.

4. Mfiri & Honam fam Nneɛma

Agyapadeɛ	Teyp a Wɔde Fiberglass Ahyɛ Akyi	PTFE Film Tape a ɛyɛ den
Ahoɔden a wɔde twetwe nneɛma	Ɔsorokɔ (≥200 N/cm) .	Fam
Ntrɛwmu a ɛkɔ akyiri	≤5% (nsusuwii a ɛyɛ den) .	Ɔkorɔn – ɛhwehwɛ sɛ wode ahwɛyiye bedi dwuma na wɔakwati sɛ wobɛtrɛw
Hyɛ nea ɛko tia	Ɛyɛ papa (ahwehwɛ nhama a wɔde hyɛ mu den) .	Hia

5. Electrical Insulation & Anti-Static (Bere a Ɛho Hia) .

Su	Ahwehwɛde	Abisadeɛ
Dielectric ahoɔden	≥3 kV a ɛpaapae ahoɔden	Ahobammɔ ma anyinam ahoɔden ɔhyew sealing bars
Nsakrae a ɛko tia static/conductive	Nneɛma a ɛwɔ soro a ɛko tia 106–109 Ω	Film lines a ɛkɔ ntɛmntɛm a static ma mfutuma adsorption, jams, anaasɛ operator shock

Nyansahyɛ: Black anti-static PTFE tape wɔ hɔ ma static accumulation a emu yɛ den – ɛde charges kɔ kɔ yiye a ensɛe release.

Nsɛm a Wɔaboaboa Ano – Akwankyerɛ a Wɔde Paw Nneɛma Ntɛmntɛm

Ɔhyew a Wɔde Siw Nsɔano a Wɔde Di Dwuma	PTFE Tape a wɔkamfo kyerɛ	Nsɛm a Ɛho Hia
VFFS/HFFS a wɔahyɛ da ayɛ (120-180°C) .	0.13 mm fiberglass + silicone PSA na ɛyɛ adwuma	Ɔhyew a wɔde kɔ baabi foforo yiye, ɛho ka sua
Heavy-adwuma sealing / ɔhyew twa	0.18-0.25 mm afiri a wɔde yɛ ahwehwɛ + silicone PSA	Extra wear ne puncture a ɛko tia
Sini a ɛkɔ ntɛmntɛm a nsɛmnsɛm a ɛnyɛ adwuma wom	0.13-0.18 mm a ɛko tia static tuntum PTFE + silicone PSA	Nneɛma a ɛwɔ soro a ɛko tia 106-109 Ω
Pulse sealing (300°C nsɔe ntiantiaa) .	0.13 mm a ɛyɛ silicone a ɛyɛ fɛ PSA	Wɔagye atom sɛ ɛyɛ 300°C peak resistance
Low-temperature / bere ne bere mu a wɔde di dwuma nkutoo	Acrylic PSA (wɔnkamfo nkyerɛ sɛ wɔnyɛ) .	Sɛ temp <150°C nkutoo a

In summary , PTFE high-temperature tape a wɔde di dwuma wɔ heat-sealing knives ne sealing strips so no de nneɛma atitiriw anan ma: anti-stick release (siw bere a wɔde yɛ adwuma ano), nnwinnade ahobammɔ (ɛkora owu a wɔde besi ananmu a ɛho ka yɛ den so), optimized seal quality (homogenized heat/pressure), ne friction a ɛba fam (smooth film feed).

Sɛ wopɛ standard packaging ɔhyew sealing, fiberglass-backed PTFE tape a silicone adhesive wɔ 0.13 mm anaa 0.18 mm thickness ne adwuma pɔnkɔ a wɔada no adi. Sɛ wopɛ nhama a ɛtaa twa anaasɛ ɛyɛ static a ɛkorɔn a, kɔ soro kɔ 0.25 mm anaa anti-static black grade. Bere nyinaa hwɛ sɛ adhesive no hyew kɔ so yɛ hyew – silicone PSA, ɛnyɛ acrylic.

Hia PTFE tape ma wo ɔhyew sealing line? Aokai PTFE de ne nyinaa a ɛyɛ den, ne tɛtrɛtɛ, ne nea ɛko tia static options a wɔakyerɛw silicone PSA ɔhyew ratings ma. Di yɛn ho nkɔmmɔ fa wo mfiri no su, sealing temperature, ne film nneɛma ho na woanya nyansahyɛ.

Above mfiridwuma mu nsɛm a wɔde mae denam Jiangsu Aokai Nneɛma Foforo Mfiridwuma Co., Ltd.

Sɛ wopɛ parameters a ɛkɔ akyiri, application nnianim asɛm, ne customized ano aduru a ɛyɛ full-range products a PTFE high-temperature ntama, PTFE high-temperature adhesive tape, PTFE mesh conveyor belt, seamless fusing machine belt, ɔfã biako PTFE coated ntama, high-temperature resistant conveyor belt ne fiberglass ntama , yɛsrɛ wo di yɛn ho nkɔmmɔ: