Cogo min na coating Uniformity bɛ nɔ bila PTFE-Impregnated Fibreglass Fabric Performance la – Fɛn 7 minnu nafa ka bon kosɛbɛ

A dilanni na PTFE-impregnated fibreglass fabric , coating uniformity is not just a cosmetic consideration – a ye taabolo jiralan jɔnjɔn ye min bɛ fɛn dilannen hakɛ ni a kɛcogo ɲuman jira. Hali ni bɛnbaliya misɛnninw bɛ se ka kɛ sababu ye ka sigida dɛsɛ baara waati la, ka nɔ bila fɛn bɛɛ la k’a ta baarakɛcogo la min tɛ nɔrɔ, ka taa a bila kuran sɔgɔli la ani masinw ka muɲuli la.

O nɔ ninnu faamuyali nafa ka bon finiw dilannikɛlaw n’u ɲɛfɔbagaw bɛɛ bolo, fini minnu dilannen don ni PTFE ye.

Aokai PTFE ye finiko kelen-kelen bɛɛ ɲɛnabɔ ka tɛmɛn fɛn caman kan. Nin gafe in b’a ɲɛfɔ cogo min na finimugu min tɛ kelen ye, o bɛ nɔ bila baarakɛcogo jɔnjɔn wolonwula la.

Non-Stick and Release Properties – A nɔfɛko tilennenba

PTFE nafa jɔnjɔn bɛ a ka sanfɛla fanga dɔgɔyalenba la ani a bɔli baarakɛcogo ɲuman na. Datugulan min tɛ kelen ye, o bɛ o tiɲɛ k’a ɲɛsin a yɛrɛ ma.

1. Sigida nɔrɔli koɲɛw

Datugulan yɔrɔ finmanw walima yɔrɔ jɛlen minnu bɛ ni pinɛw ye, olu bɛ fibreglasi walima a jukɔrɔla resin bɔ kɛnɛ kan. Baara kɛtaw la i n’a fɔ dumuni tobili ani kaseti tigɛcogo, fɛn nɔrɔlenw bɛ nɔrɔ galasi fiyɛw la minnu bɛ kɛnɛ kan – o bɛ na ni fɛnw bɔli gɛlɛn ye, nɔgɔ tolenw, ani ka fɛn dilannenw sanfɛla nɔgɔ.

2. Bɔli fanga min tɛ kelen ye

Yɛlɛma minnu bɛ kɛ finimugu janya la, olu bɛ kɛ sababu ye ka fɛn fitininw jiginni kɛ sanfɛla fanga la. Ni fɛn minnu bɛ sɔgɔsɔgɔ kosɛbɛ, olu tigɛcogo tigitigi walima u bɔli senfɛ, yɔrɔ nɔrɔlenw ni u nɔgɔlenw ɲɔgɔn falen-falen bɛ fɛn dilanni taabolo tiɲɛ ani ka fɛn dilannenw sɔrɔta dɔgɔya kosɛbɛ.

Masina cogoyaw ani baarakɛcogo muɲuli – Degun hakɛ caya yɔrɔ finmanw na

Coating uniformity bɛ degun tilatilali ni interlayer bonding ɲɛnabɔ k’a ɲɛsin a yɛrɛ ma.

1. Degunw hakɛ min bɛ na ni ɲɛjibɔ ye joona

Dan minnu bɛ finimugu belebelew ni finimugu finmanw cɛ, olu bɛ kɛ masin barikantanya yɔrɔw ye. Ni aw bɛ segin-ka-bɔ ani ka aw kɔrɔta, degun tɛ se ka jɛnsɛn cogo kelen na – faraw bɛ daminɛ ani ka jɛnsɛn ka ɲɛ ka tɛmɛ finimugu finmanw walima pinɛw kan, o bɛ kɛ sababu ye ka fini bɛɛ kari joona.

2. Fibreglasi bɔgɔlanw ka bɔrɔ ni u bɔgɔbɔgɔli ni bɔgɔdaga ye

Ni PTFE emulsion ma se ka don fibre bundles kɔnɔ ka ɲɛ ani ka filimu sanfɛla dɔrɔn de kɛ, PTFE layini finman bɛ sɛgɛn joona ni sɔgɔsɔgɔninjɛ walima tension ye. Glasi fiyɛ minnu bɛ kɛnɛ kan, ni u lakananen tɛ, olu bɛ wuli ka kari ka kɛ tiɲɛni ye min bɛ i n’a fɔ balawu, o bɛ taa ni u sɔgɔli fanga bɔnɛni ye kosɛbɛ.

3. Aw bɛ fɛnw cɛla ɲɛgɛnw fanga dɔgɔya

Ni PTFE fibreglasi fini lamininen caman bɛ a la, ni cɛmancɛlafɛnw falencogo tɛ kelen ye, o bɛ fiɲɛ bila yɔrɔ la ani siriyɔrɔw barikamaw – minnu ka teli ka kɛ delamination ni blistering ye ni u digilen don ni funteni ye walima ni u bɛ baara kɛ waati jan kɔnɔ.

Kuranko ni dielektriki nafaw – Fatal for Electronics

PTFE fibreglasi fini min bɛ kɛ ciriw kɔnɔ minnu bɛ se ka kɛ ni frequences hautes ye, rada radomes ani insulating gaskets kɔnɔ, kuran baarakɛcogo bɛnbali bɛ na ni baarakɛbaliya ye min bɛ se ka mɔgɔ faga.

1. A bɛ jigin kosɛbɛ ka bɔ tiɲɛni wulicogo la

Pinɛw walima sigida la, finimugu janya min tɛ se ka kɛ, o bɛ kuran fanga bonya ka tɛmɛ lamini yɔrɔw kan yɔrɔ jan ni tensionba ye, o bɛ kɛ sababu ye ka tiɲɛni ni kurukuruni yɔrɔw dilan minnu ka suma. Fɛn minnu dilannen don cogo kelen na, olu ka tiɲɛni fanga bɛ se ka dɔgɔya ka se u ɲɔgɔnna 1/10 dɔrɔn ma minnu datugulen don cogo kelen na.

2. Dielektriki sabatili ni dissipation factor (dissipation factor) min tɛ kɛ cogo la

Yɛlɛma misɛnnin minnu bɛ kɛ finimugu janya ni resin doni la, olu bɛ sigida dielektriki paramɛtiriw Changer. Siginidenw cicogo la min bɛ kɛ ni fɔkanba ye, o bɛnbaliya sugu bɛ taamasiyɛnw bila kɔfɛ, ka impedansi bɛnbaliya, ani jɔli jikuruw hakɛ tiɲɛ – o tɛ sɔn 5G kumaɲɔgɔnya ni teliyaba nizɛri sɛrɛkiliw ma.

Funteni kunbɛnni ani a hakɛ sabatili – Dɔgɔyalibaliya

Sintering defects ani thermal shrinkage min tɛ kelen ye, o bɛ bɔ resin datugucogo bɛnbali la yɔrɔ kelen na. Ni sintering funteni bɛ 380°C lamini na, finimugu yɔrɔ minnu ka bon ani minnu ka fin, olu bɛ danfaraba don u wulicogo, u woyocogo ani u dɔgɔyali kɛcogo la.

• Fini kurulen jugumanba ani a dakunw bɛ wuli

• Sigida sɔgɔli-dɔgɔyali yɔrɔ lakolonw

• Kɔnɔna degun tolenw bɛ mara nɛnɛ kɔfɛ, o bɛ kɛ sababu ye ka fɛn caman tigɛli daminɛ min tɛ se ka fɔ ka ɲɛ, ni a kɛra kɔfɛ funteni caman na

Hotspot (yɔrɔ funteni) sɔrɔli ka da funteni-sɔrɔbaliya kan

Ni u kɛra bɔli matarafalanw ye minnu bɛ kɛ ka presse funtenimanw kɛ, danfara nɔgɔlen minnu bɛ finimugu janya la, olu bɛ kɛ sababu ye ka funteni kɛlɛli yɔrɔw lawuli – o bɛ na ni baarakɛminɛnw sumayacogo tɛ kelen ye, u kɛnɛyali dafalen tɛ, u kulɛriw tɛ kelen ye, ani u ɲɛda cogoya tɛ bɛn ɲɔgɔn ma.

Barri chimique ani Corrosion Resistance – Jibɔ siraw

Pinholes, cracks ani ultra-thin coating sections bɛ kɛ don sira tilennenw ye gazi nɔgɔlenw ni jimafɛnw na. Fɛnɲɛnamafagalanw bɛ don fibreglasi ni PTFE resin cɛsira la wicking effect fɛ, ka dɔɔni dɔɔni ka composite structure tiɲɛ ka bɔ kɔnɔna na ka taa kɛnɛma – o bɛ kɛ sababu ye ka yɔrɔba dɔw kurukuru, ka delamination, ani ka fɛn dilannenw tiɲɛ pewu.

Surface Quality and Processing Precision – Jiginni nafamafɛnw

1. Flanko ni a janya caman ɲɔgɔnnabɔli min tɛ muɲuli ye

Baarakɛcogo kɔrɔlenw minnu bɛ tile laminatɛriw ni FPC laminiw la, olu bɛ mikron hakɛ muɲuni de wajibiya. Datugulan min tɛ kelen ye, o bɛ kɛ sababu ye ka janya jiginniw lawuli minnu bɛ lamini tansiyɔn tila cogo la min tɛ bɛn – ka fara dogolenw bila tile selilɛriw kan walima ka micro-short circuits bila ciriw kan.

2. Surface texture transfer (yɔrɔ min bɛ kɛ ka fɛnw bila ɲɔgɔn na) nafaw

Ni a dacogo tɛ kelen ye, o bɛ oranjɛ ɲɛ, jibɔ taamasiɲɛw ani a ɲɛda nafama wɛrɛw lase. Ni baara kɛra ni u ye i n’a fɔ bɔli fɛnw, o dafabaliya ninnu bɛ wuli ka dafa baarakɛminɛnw kan minnu sirilen don i n’a fɔ pankurunw ni jiri dilannenw – o bɛ kɛ sababu ye ka ɲɛgɛnw kɛcogo juguw lase u ma minnu tɛ se ka wuli.

3. Conveyor belt yaala-yaala ni a yɛrɛyɛrɛ

Ni fɛnw ye minnu bɛ taa ni fɛnw ye minnu bɛ taa ni fɛnw ye, kɛrɛfɛla dacogo bɛnbaliya bɛ kɛ sababu ye ka cɛsirilan fan fila bɛɛ janya ni ɲɔgɔnkanu hakɛ tɛ kelen ye – o bɛ sa yaala-yaala ni yɛrɛyɛrɛ waati ni waati baara kɛtuma na, o bɛ dɔ bɔ fɛnw lasecogo tigitigi la.

Weldability ani Self-Adhesion – Joli barika dɔgɔyali

Funteni-sigi fanga dɔgɔyara ani min tɛ bɛn ɲɔgɔn ma: PTFE fibreglasi fini bɛ se ka lamini ni funteni ye walasa ka kɛ fɛn dɔw ye minnu bɛ i n’a fɔ tubabu walima minnu bɛ i n’a fɔ bɔrɔ. Datugulan min tɛ kelen ye, o bɛ na ni:

• Resin bɛrɛbɛrɛ (soudure virtuelle) – fusion barikama

• Nɛgɛdaga minnu ka bon kojugu, minnu tɛ se ka fusion joints nafamaw dilan

• Jogin fanga ka dɔgɔ kosɛbɛ ni kunnafonidilanw jɛnsɛnni ye

• Dɛsɛ fiɲɛbɔli ni degun kunbɛnni sɛgɛsɛgɛliw la

Kuma surun – PTFE Fibreglasi fini ka ɲɛnamaya sira

Coating uniformity ye PTFE fibreglasi fini ka ɲɛnamaya sira ye. A ka ca ni ɲɛgɛn ko ye kosɛbɛ – a ye garanti jɔnjɔn ye nin ko in na:

Walasa ka se ka finimugu kelenw sɔrɔ: Dilanbagaw ka kan ka ninnu kɔlɔsi tigitigi:

• Emulsion viscosité ani a kɔnɔfɛnw

• Fibre de verre fini tension

• Impregnation squeeze gaps (sɔgɔsɔgɔninjɛ dacogo, dɔgɔtɔrɔ ka wuluwulu dacogo) .

• Funteni jiginni taabolo caman na jalen, sɔgɔli, ani sɔgɔli kɔfɛ taabolo bɛɛ la

Aokai PTFE bɛ baara kɛ ni taabolo kɔlɔsili gɛlɛn ye walasa ka finimuguw kɛ kelen ye fɛn dilannen suguya bɛɛ la. Aw ye anw sɔrɔ walasa ka baro kɛ aw ka kelenya wajibiyalenw kan ani aw ka ɲinini magow kan.

Sanfɛla fɛɛrɛko kɔnɔkow bɛ di Jiangsu Aokai Kura Materiel Teknoloji Co., Ltd.

N’aw b’a fɛ ka fɛn ɲɛfɔlenw sɔrɔ, baarakɛcogo misaliw ani fura minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye an ka fɛn dilannenw bɛɛ lajɛlen na i n’a fɔ PTFE fini min bɛ funteni caman bɔ, PTFE kasɛti min bɛ nɔrɔ funteni caman na, PTFE min bɛ funteni caman minɛ, PTFE cɛsirilan min tɛ sɔgɔ, PTFE fini min bɛ kɛ fan kelen fɛ, fɛnɲɛnamafagalan min bɛ se ka funteni caman kɛlɛ ani min bɛ se ka funteni kɛlɛ fibre de verre fini, aw bɛ se ka anw sɔrɔ kunnafoniw fɛ minnu bɛ duguma:

• Cɛ Guo: +86 18944819998 ye

• Cɛ Liu: +86 13705266308 ye

An bɛ baarakɛcogo ɲuman ni danbe sabati i n’a fɔ an ka jago sariyakolo jɔnjɔnw, ka izini furakɛlicogo kelenw di ni an dusukun bɛɛ ye ani ka kiliyanw dɛmɛ ni an janto ye!