PTFE nɔrɔli kasɛti minnu bɛ funteni caman na, olu ka segin-ka-bɔnye baara kɛcogo ɲɛ

PTFE kaseti funteni caman bɛ kɛ ka caya baarakɛyɔrɔw la, a ka kan ka bɔ yɔrɔ minnu na ka segin ka kɛ siɲɛ caman – funteni sigilanw kan fɛn caman cili waati, 3D sɛbɛnnikɛlan dilanw kan, walima i n’a fɔ waati dɔɔnin masike ɛntɛrinɛti kan. Nka, sɛgɛsɛgɛli damadɔw kɔfɛ, kasɛti caman tɛ tack (tack) bɔ, u bɛ to to, walima u tɛ se ka siri.

Kibaru duman : baarakɛcogo kura bɛ se ka ɲɛ kosɛbɛ ni fɛnw sɛgɛsɛgɛli jɛlenw ye fɛn naani kɔnɔ: adhesive formulation , substrate treatment , backside coating design , ani baarakɛcogo ɲuman & ladonni.

Aokai PTFE ye PTFE kasɛtiw labɛn minnu bɛ se ka baara kɛ kokura ni o sariyakolow ye. Nin gafe in bɛ dakun kelen-kelen bɛɛ ɲɛfɔ ka ɲɛ.

Adhesive Formulation Optimisation – Fɛn min ye fɛnba ye

Nɔrɔlan yɛrɛ de ye baara kɛcogo kura dantigɛlan fɔlɔ ye. Furakɛcogo naani bɛ segin-ka-bɔnye kɛcogo ɲɛ.

1. Ka jɛɲɔgɔnya fanga ni ɲɔgɔndan density ɲɛ

Aw bɛ silikɔni gomu ta min bɛ polimerizasiyɔnba la ani ka dɔ fara ɲɔgɔndan yɔrɔw kan walasa ka nɔrɔlan tigɛli kɛ fɛn ye min bɛ se ka wuli. O bɛ tigɛli walima nɔrɔli bali ka segin-ka-bɔ a kɛtuma na ani ka kola lamini yɛrɛ bɔnɛ dɔgɔya. Nɛgɛ min sirilen don ɲɔgɔn na kosɛbɛ, o bɛ a bɔ ka saniya sanni a ka fara a kɔnɔ.

2. Silikoni jiginni formula min ka dɔgɔn

Aw bɛ baara kɛ ni farali furakɛli fɛɛrɛ ye min bɛ kɛ ni platini ye ani ka fɛnw bɔ ka ɲɛ minnu girinya ka dɔgɔn. O bɛ silikoni tulu bɔli bali min bɛ nɔrɔli yɔrɔ nɔgɔ ani ka a tanga sɔgɔsɔgɔninjɛ dɔgɔyali ma min bɛ to senna. Nɛgɛ minnu bɛ taa yɔrɔ wɛrɛw la, olu bɛ u ka tack fɔlɔ mara siɲɛ caman kɔnɔ.

3. Microphase structure ka ɲɛsin nɔrɔli ma min bɛ se ka bila yɔrɔ wɛrɛ la

Aw bɛ MQ silikɔni resin fara a kan walima ka polimɛri rezo dɔ kɛ min bɛ don ɲɔgɔn na walasa ka segin gɛlɛn–segment soft microphase separation dilan :

• Seginkanni gɛlɛnw – bɛ jɛɲɔgɔnya di walasa ka kola tolenw cili kɛlɛ

• Seginkanni nɔgɔlenw – bɛ tackiness di

A sɔgɔsɔgɔninjɛ yɔrɔ dɔ bɛ se ka sɔrɔ buguri kolen kɔfɛ ka bɔ a sanfɛla la. Nin 'repositionable' jogo in ka ɲi kosɛbɛ baarakɛminɛnw ma minnu bɛ ladilanni caman wajibiya ɲɔgɔnye waati.

4. Ji-ko-ko min bɛ se ka segin a kan, n’a bɛ se ka fɛn caman sɛmɛntiya

Ni nɔrɔlen yɔrɔ nɔgɔlen don ni buguri ye, nin silikɔni nɔrɔlen caman bɛ se ka ko ni ji sanuman ye walima ni furaji nɔgɔlen ye, ka 90% ni kɔ sɔrɔ a daminɛ na a jalen kɔfɛ. O nafa ka bon kɛrɛnkɛrɛnnenya la saniyayɔrɔ walima ɛntɛrinɛti baarakɛyɔrɔw la, nɔgɔ tɛ se ka bali yɔrɔ minnu na.

Aw bɛ fanga di ankɔri fanga ma PTFE Substrate ni Adhesive Layer cɛ

PTFE bɛ ni sanfɛla fanga dɔgɔyalenba ye (dynes 18-20/cm), o bɛ kɛ sababu ye nɔgɔya la ka nɔrɔ dafalen ci – nɔrɔlan bɛɛ bɛ wuli ka bɔ kɔkanna na – k’a sɔrɔ furakɛli kɛrɛnkɛrɛnnen ma kɛ.

1. Substrat surface activation (sɔgɔsɔgɔninjɛ sanfɛla baarakɛcogo).

Aw bɛ kemikɛli kɛ ni sodium-naphthalene complexe ye walima ni plasma furakɛli ye PTFE fibreglasi fini kan walasa ka polar kuluw don a kɔnɔ i n’a fɔ C=O ani -OH, o bɛ se ka kɛ sababu ye ka kemikaliya siri walima ka masin barikama don nɔrɔlen ni substrat cɛ. O bɛ a to nɔrɔlan kana bɔ a kɔkanna na a bɔli senfɛ.

2. Primer coating kɛrɛnkɛrɛnnen

Aw bɛ primer (primer réactif) kɛ sani aw ka finimugu da walasa ka kemikɛli sira dɔ jɔ PTFE ni silikoni nɔrɔlen cɛ, o bɛ ankɔri dɛsɛ ban pewu. Primer bɛ kɛ i n’a fɔ molekiyɔmu jɛgɛn, a bɛ siri PTFE sanfɛla baarakɛlen ni silikoni PSA fila bɛɛ la.

Aokai PTFE bɛ baara kɛ ni primer system propriétaire ye min bɛ a to zero adhesive transfer to the back hali 10+ removal cycles kɔfɛ.

Backside (Release Surface) Furakɛli ka ɲɛ

PTFE kɔkanna bɛ bɔli baarakɛcogo di a yɛrɛ ma, o bɛɛ n’a ta, segin-ka-bɔnye ni a wulicogo bɛ nɔrɔli yɔrɔ tiɲɛ hali bi ni sɔgɔsɔgɔli ni mikro-tearing ye.

1. Enhanced release performance kɔkanna fini

Aw bɛ wɛrɛ kɛ fluorosilicone walima silicone release layer PTFE kɔ la. A bɛ wuli fanga sabatilen mara funteni caman na ani degun kuntaalajan kɔnɔ, ka sanfɛla fiyɛri samali bali ani ka nɔrɔlan tiɲɛni bali sani a ka baara kɛ kokura.

2. Kɔfɛla min bɛ kɛ ni jiri ye walima min bɛ kɛ ni mikro ye

Aw bɛ dɔ bɔ kɔfɛla ni nɔrɔyɔrɔ cɛ ɲɔgɔn sɔrɔyɔrɔ yɛrɛ la, ka tiɲɛni fanga dɔgɔya yɔrɔnin kelen kola kan a sɔgɔli waati. Nin yɔrɔ in min bɛ kɛ ni mikro-texture ye, o bɛ 'stick-slip' nɔ dɔgɔya min bɛ se ka nɔrɔlan tigɛ.

Baarakɛcogo ni ladonni siratigɛ la

Hali kaseti min dilannen don ka ɲɛ, o bɛna tiɲɛ joona ni a ma minɛ ka ɲɛ. Waleya ɲumanw bɛ baarakɛcogo kura janya kosɛbɛ.

1. Nɛgɛdaga yɔrɔ saniyacogo ɲuman

Viscosité dɔgɔyali bɛ sɔrɔ a fanba la ni surface buguri nɔgɔli ye. Aw bɛ a yɔrɔ ko nɔgɔya la fan kelen fɛ ni fini ye min buguri tɛ a la, min su ji sanuman na walima dɔlɔ min tɛ ji la, o kɔ aw bɛ a ja fiɲɛ na a yɛrɛ la walima ni fiɲɛ nɛnɛ ye – a nɔrɔli bɛna segin a cogo kɔrɔ la. Saniya kɛli tuma bɛɛ baarakɛcogo ni ɲɔgɔn cɛ, o ye ladonni wale kelen ye min bɛ nɔ bɔ kosɛbɛ.

2. Aw ye aw yɛrɛ tanga tiɲɛni ma baarakɛyɔrɔw la minnu ka jugu kosɛbɛ

• Aw bɛ a ɲɛw bɔ dɔɔni dɔɔni ni a bɔli yɔrɔ fitinin ye (a ka surun 180° la) walasa ka jɛɲɔgɔnya dɛsɛ faratiw dɔgɔya.

• Aw kana a kɛ ka tɛmɛ funteni hakɛ dantɛmɛnen kan – nɔrɔlan bɛna kɔrɔ ani ka gɛlɛya, a tɛ se ka baara kɛ kokura.

• Aw bɛ a nɔrɔlen yɔrɔ saniya ka kɔn o ɲɛ – tulu nɔgɔw bɛ nɔgɔli yɔrɔ nɔgɔ joona, wa u tɛ se ka bɔ ka ɲɛ.

3. Aw bɛ fiɲɛbɔlanw bɔ lamini na

Bugun ka teli ka dalajɛ bulonw da la ani ka sigida degunw caya, o bɛ nɔrɔlenw kɔrɔya teliya. Bugun tɛ min na ka ɲɛ (ni aw bɛ baara kɛ ni sɔgɔsɔgɔninjɛ walima wuluwulu ye) o bɛ kaseti si janya min bɛ se ka baara kɛ kokura.

Kuma surun – Baarakɛcogo kura ɲɛtaa siratigɛ naani

Aokai PTFE bɛ PTFE kasɛtiw dilan minnu bɛ ɲɛ walasa u ka se ka nɔrɔ siɲɛ caman. An ka ji-ko-kɛnɛw bɛ se ka >90% tack sɔrɔ saniya kɔfɛ, wa an ka primer system bɛ zero adhesive transfer sabati. Aw ye anw sɔrɔ walasa ka furaw ladilikanw sɔrɔ ani ka cycle test data sɔrɔ.

Nin fɛɛrɛ sɛbɛn in bɛ di Jiangsu Aokai Kura Materiel Teknoloji Co., Ltd.

N’aw b’a fɛ ka fɛn ɲɛfɔlenw dɔn, baarakɛcogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani fura minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye an ka fɛn dilannenw bɛɛ lajɛlen na, i n’a fɔ PTFE finiw minnu bɛ funteni caman bɔ, PTFE kasɛti minnu bɛ nɔrɔ funteni caman na, PTFE mesh conveyor belts, seamless fusing machine belts, single-sided PTFE coated cloth, heat-resistant conveyor belts and high-temperature fiberglass finiw, aw bɛ se ka anw sɔrɔ nin kanw fɛ minnu bɛ duguma:

• Cɛ Guo: +86 18944819998 ye

• Cɛ Liu: +86 13705266308 ye

An bɛ tugu baarakɛcogo hakilila la min ye baarakɛcogo ɲuman ni danbe ye, an b’an yɛrɛ di ka furakɛlicogo jɛlenw di aw ma yɔrɔ kelen na ani ka kiliyanw dɛmɛ ni hakili ye!