Don Matsanancin Sharuɗɗa & Ƙarfafa Ayyukan
Dorewa na PTFE Fiberglass Tepe Manufacturer

Kuna Samun Ingantacciyar: Samar da Sauri, Ƙwarewar Shekaru 20+

Kuna samun Max. Ƙimar: Samfurin Premium, Maɗaukakin Margins

MAGANAR ROKON

Farashin PTFE


samuwa:



Tambaya

Kashi na samfur

Q Zan iya yin oda na al'ada nisa ko tsayi?

A iya. Muna ba da faɗin al'ada, kauri, da tsayin juyi don dacewa da tsarin ku. Tuntuɓi ƙungiyar tallace-tallacenmu tare da ƙayyadaddun ƙayyadaddun ku da adadin da ake buƙata.
Ta yaya zan adana da kuma rike tef ɗin?

Adana a wuri mai sanyi, busasshiyar nesa da hasken rana kai tsaye da wuraren zafi. Ka guji ɗaukar dogon lokaci zuwa danshi. Ajiye nadi a cikin ainihin marufi lokacin da ba a amfani da shi.
Q Menene ainihin lokacin jagora?

Daidaitaccen samfuran jigilar kayayyaki a cikin kwanakin kasuwanci 7 bayan tabbatar da oda; Zaɓuɓɓukan al'ada na iya ɗaukar lokaci mai tsawo. Za mu tabbatar da tabbataccen lokacin jagora tare da ku akan tsari.
Q Shin tushen silicone, acrylic, silicone-acetate?

A Adhesive tushen silicone ne, duk da haka, abokin ciniki na iya keɓance tef na tushen acrylic, wanda ke ba da mannewa mafi girma.
Q Menene bambanci tsakanin PTFE silicone m tef da PTFE acrylic tef?

A
Ayyukan zafin jiki

● Silicone m:

Kyakkyawan kwanciyar hankali mai zafi kuma ya kasance mai sassauƙa a ƙananan yanayin zafi; dace da thermal hawan keke da gaskets / hatimi.

● Acrylic m:

Kyakkyawan aikin zafin jiki gabaɗaya amma gabaɗaya baya da sassauƙa kamar silicone; na iya zama mai karyewa a ƙananan zafin jiki ko kuma yayi laushi a yanayin zafi mai girma.

Juriya da muhalli

● Silicone m:

Kyakkyawan juriya ga danshi, nutsewar ruwa, bayyanar UV (don amfani da waje), da sunadarai masu yawa; yana kula da elasticity.

● Acrylic m:

Kyakkyawan sinadarai da juriya na UV don mahalli da yawa amma yawanci ƙasa da sassauƙa fiye da silicone; juriya na yanayi ya dogara da tsari.

Sassauci vs rigidity

● Silicone m akan PTFE:

Ƙarin sassauƙa, mai iya ɗaukar motsi, girgizawa, da faɗaɗa zafi ba tare da rasa hatimi ba.

● Acrylic m akan PTFE:

Yawanci mai tauri; mai ƙarfi na farko amma ƙasa da gafara tare da motsi; mafi kyau ga m, high-tack shaidu.

Samfura masu dangantaka

Ultrahigh Molecular Weight Polyethylene (UHMWPE) tef manne

Silicone m tef

PTFE yankin kaset

Tef ɗin PTFE Don Mai ɗaukar zafi

Black Anti-Static PTFE Tef

Black Anti Static PTFE Tef

Tef ɗin Fiberglass na PTFE tare da Liner Saki

Farashin PTFE Fiberglass Tape

Black PTFE Tef

Labarai masu alaka

[Tef ɗin Adhesive PTFE ] Tef ɗin Maɗaukakin Maɗaukakin Zazzabi PTFE-Maɗaukaki-Maɗaukaki - Daidaituwar Halittu da Kariyar Aikace-aikace

Babban tef ɗin PTFE mai zafin jiki na likitanci yana haɗa nau'in PTFE mai dacewa tare da mannen silicone da aka warkar da platinum. Babban fasali: TS EN ISO 10993 mai yarda (babu cytotoxicity, hankali, ko haushi), yana jure maimaita haifuwa (turi / EO / gamma), juriya na zafi 260 ° C. Mahimman taka tsantsan: kar a wuce 260°C ( hayaki mai guba sama da 300°C), iskar gamma na iya haifar da ɓarna, inganta hanyoyin haifuwa, da buƙatar cikakkun takaddun yarda (rahotanni na ISO 10993, MSDS, bayanan tsufa). Ba don amfani da jini kai tsaye ko dasawa ba sai in an inganta shi ta musamman.
[Tef ɗin Adhesive PTFE ] Yadda Ake Haɓaka Maimaita Ayyukan Adhesion na PTFE High-Temperature Adhesive Tepes

PTFE tef reusability ya dogara da dalilai hudu: m tsari (high crosslink yawa, low silicone hijirarsa, microphase tsarin for repositionable tack), substrate anchoring (surface kunnawa + firamare don hana cikakken m canja wurin), backside shafi (saki Layer don kare m a lokacin unwinding), da kuma dacewa handling (tsaftace-tsaftacewa m surface). Abubuwan adhesives da za a iya wanke ruwa na iya murmurewa> 90% tack bayan tsaftacewa.
[Tef ɗin Adhesive PTFE ] Zana Tsarin Maɗaukaki na Maɗaukaki don Faɗin-Zazzabi-Range PTFE Babban Kaset ɗin Zazzabi

Tef ɗin PTFE mai faɗin zafin jiki yana buƙatar PSA silicone wanda ke kiyaye mannewa daga -70°C zuwa 260°C. Maɓallin ƙira mai mahimmanci: Layer na tsaka-tsakin tsaka-tsaki (hana delamination), microstructure na tsibirin teku (MQ resin tsibiran + polysiloxane ci gaba da lokaci), gradient crosslinking (high-density Layer Layer for creep juriya, low-density m Layer for low-temp tack), da zafi-stabilized fillers (cerium oxide for oxide for oxide). ɓangarorin siloxane da aka gyaggyara Phenyl suna hana ƙarancin zafin jiki, yana ba da damar sassauci a ƙasa -100°C.
[Tef ɗin Adhesive PTFE ] Yadda PTFE Tef Yanke Ƙarshen Tsarin Fuskar ke Shafar Adhesive Oozing da Edge Daga

Tsarin fuskar ƙarshen yanke na tef ɗin zafi mai zafi na PTFE kai tsaye yana shafar manne da ɗagawa a lokacin aikace-aikacen. Rarrashin tsagawa (rauni mara kyau, kusurwa mara kyau) yana haifar da filaments na manne, yana ɓatar da gefen gefen gefe, kuma yana fallasa burbushin fiberglass - yana haifar da zub da jini, haɗin gwiwa mai rauni, da ɗagawa ƙarƙashin zafi ko tashin hankali. Fuskokin ƙarshen da ba bisa ka'ida ba (wavy, protruding) suna haifar da rarrabawar matsatsi mara daidaituwa, tuƙi mai ɗaci yayin ajiya. Maƙasudin ƙarshen fuska yana da santsi, ƙwanƙwasa, kuma ba tare da lalacewa ba - yana aiki azaman hatimi wanda ke kulle manne kuma yana tabbatar da cikakken haɗin kai.
[Tef ɗin Adhesive PTFE ] Yadda Matsakaicin Ƙimar Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin PTFE

A lokacin PTFE tef shafi, da sauran ƙarfi volatilization kudi na silicone matsa lamba-m m ne m tsari siga. Sauri da yawa → Fatar jiki, rashin daidaituwa, raƙuman raƙuman ruwa (maganin tarko), da ramuka (ƙamuwa ko gurɓatawa). Jinkirin → sagging, kauri gefuna, da dewetting a kan ƙananan-makamashi PTFE. Kyakkyawan dabara: jinkirin jujjuyawar farko don daidaitawa da kumfa kumfa, sannan hanzarta bushewa don siffata. Yi amfani da gauraye masu kaushi (toluene/xylene + bushewa da sauri) da zafin jiki na gradient (ƙananan → matsakaici → high).