Kedu ihe bụ isi usoro nke Teflon akwa na-ekpo ọkụ na-emepụta ihe oyiyi fotovoltaic nke anyanwụ?

Na ya elu okpomọkụ na-eguzogide, na-abụghị osisi onwunwe, edo okpomọkụ conduction na mkpuchi arụmọrụ, Teflon elu-okpomọkụ ákwà si Jiangsu Aokai New Materials na ọtụtụ-eji na multiple isi usoro nke anyanwụ photovoltaic modul mmepụta, gụnyere lamination, soldering na ọgwụgwọ, na-egwu ihe irreplaceable ọrụ na usoro nkwa. A na-akọwa ngwa na usoro dị iche iche na usoro isi ọ bụla n'okpuru.

1. Usoro Lamination - Isi Ngwa nke Teflon High-Temperature Cloth

Lamination bụ nzọụkwụ dị oke egwu na encapsulation modul PV, ebe a na-etinye akwa Teflon dị elu n'ụdị dị iche iche:

·  Dị ka cover ákwà na nkwado akwa : kpọmkwem na-ekpuchi elu na ala na-ebupụta nke modul iji chebe iko na backsheets si n'ibu scratches site na-ekpo ọkụ pịa efere, mgbe ya na-abụghị osisi onwunwe na-egbochi ijubiga ihe ókè gbazere EVA / POE nrapado ihe nkiri si agbaso ngwá ọrụ.

Dị  ka eriri ebu : Emebere ya ka ọ bụrụ eriri ebufe maka ụgbọ njem modul kwụsiri ike n'ime laminators. Esemokwu dị n'elu ya dị ala na-eme ka ọ nweghị mgbanwe modul, ọ na-eguzogide ọrụ na-aga n'ihu na 140-160 Celsius.

·  Uniform okpomọkụ nyefe ọkara : guzozie eguzozie thermal conductivity na-enye ohere nwayọọ okpomọkụ penetration si na-ekpo ọkụ efere na encapsulant fim, na-ezere ikuku egosipụta ma ọ bụ na-ekwekọghị ekwekọ cross-njikọ kpatara site na mpaghara ekpo oke ọkụ.

Ọdịdị  ikuku ikuku : Ụfọdụ akwa Teflon microporous na-eduzi gas fọdụrụnụ site na ihe nkiri nrapado n'okpuru nrụgide lamination, na-ebelata ntụpọ ime.

:  Nkwụsi ike akụkụ obere nrụrụ n'okpuru ogologo oge okpomọkụ na-eme ka nkesa nrụgide otu ma na-egbochi microcracks cell.

2. Soldering Usoro – Key Nkwado na eriri soldering na Stack Soldering

akwa Teflon na-ekpo ọkụ na-akwado njikọ solder dị elu nke mkpụrụ ndụ anyanwụ:

Ihe  nfefe eriri : Ekpuchiri ya na eriri eriri iji gbochie mgbaze gbazere ma ọ bụ splashes solder ịrapara na akụrụngwa. Ọdịdị ya dị nro na-ebelata micro-vibration na ncha n'oge nnyefe cell.

·  Nkwado nkwado na ndebiri ọnọdụ : Beechapụ n'ụdị dị iche iche ma tinye ya n'okpuru sel maka nkwado kwụsiri ike nke nhazi ziri ezi n'etiti rịbọn na bọsbars. Ihe mkpuchi ọkụ ya na-edobe windo okpomọkụ kwụsiri ike.

3. Usoro ọgwụgwọ na nyocha inyeaka - Ngwa agbatịkwuru

E wezụga usoro isi, a na-ejikwa akwa Teflon dị elu maka:

Ịgwọ  oven liners ma ọ bụ separators : Dị ka tray liners n'oge junction igbe ite nrapado na-agwọ ọrịa iji gbochie oke nrapado ịrapara na-agwọ ngwá ọrụ.

·  Nchekwa ule okpomọkụ dị elu : A na-eji ya dị ka oyi akwa dịpụrụ adịpụ n'etiti ihe nrụnye na ihe nlele na ule na-ekpo ọkụ ma ọ bụ nyocha ịka nká gburugburu ebe obibi, na-ezere adhesion thermal n'etiti modul backsheets / okpokolo agba na metal fixtures na elu okpomọkụ.

Na nchịkọta, Teflon akwa okpomọkụ dị elu na-arụ ọrụ dị ka isi usoro usoro na isi ọnụ gụnyere lamination, soldering na ọgwụgwọ na PV modul mmepụta yinye. Ọrụ ya kwụsiri ike na-emetụta mkpụrụ modul encapsulation na ntụkwasị obi ogologo oge.

Ozi dị n'elu bụ Jiangsu Aokai New Materials Technology Co., Ltd.

Maka nkọwa zuru ezu, ọnọdụ ngwa na ihe ngwọta ahaziri nke ngwaahịa anyị zuru oke - gụnyere akwa Teflon dị elu, teepu teflon dị elu, eriri akwa PTFE dị elu, eriri na-enweghị ihe ọ bụla maka igwe na-ejikọta, akwa PTFE nwere otu akụkụ, akwa ọkụ na-eguzogide ọgwụ na-ebuga belt na akwa kọntaktị site na akwa glaze:

·  Igwe ọkụ ọrụ: Mr. Guo +86 18944819998 Mazị Liu +86 13705266308

N'ịgbaso nkà ihe ọmụma ọrụ nke ọkachamara na iguzosi ike n'ezi ihe, anyị raara onwe anyị nye inye gị ngwọta nkwụsịtụ na ọrụ nlebara anya!