PTFE Tep Shelf Layf: Wetin Yu Nid fɔ No fɔ Prɔpa Storage

Yu gɛt wan rol fɔ PTFE ay-tɛmpracha tep we dɔn sidɔm na di shelf fɔ mɔnt. Yu tink se i stil fayn? I go lɛf rɛsɛdyu na yu ɔt sila? Yu tink se di adeziv go pwɛl we di ples wam?

Di ansa dɛn dipen pan di we aw dɛn kip am ɛn di tɛm we dɛn de kip am. PTFE tep – lɛk ɛni prɛshɔn-sɛnsitiv adeziv prodak – gɛt wan fayn shelf layf. Bɔt if dɛn kip am kɔrɛkt wan, i kin de fɔ lɔng tɛm pas di tɛm we dɛn rayt se i dɔn.

Aokai PTFE de mek PTFE tep wit kɔnsistɛns kwaliti. Dis gayd de ɛksplen di ɔfishal shelf layf standad, di pefɔmɛns dɛgradɛshɔn trɛshɔld, ɛn simpul tɛst fɔ chɛk if wan ol rol stil yu kin yuz.

Shelf Layf Stɛndad – Aw Lɔng PTFE Tep De Las?

Di shelf layf fɔ PTFE ay-tɛmpracha tep dipen pan aw dɛn kip am ɛn di kwaliti fɔ di matirial dɛn.

1. Spɛsifi k stɔrɔj ​​kɔndishɔn dɛn

Fɔ mek di tep gɛt di shelf layf we dɛn rayt, yu fɔ kip am ɔnda dɛn kɔndishɔn ya:

2. Jɛnɛral shelf layf bay gred

Impɔtant notis: Di shelf layf na di tɛm we di tep gɛt garanti fɔ mit ɔl di pefɔmɛns spɛsifikɛshɔn dɛn. Afta dat, di men prɔpati dɛn kin pwɛl. Bɔt bɔku tɛm, prɛmiɔm tep we dɛn dɔn kip fayn fayn wan kin kɔntinyu fɔ yuz pas di de we dɛn rayt am – bɔt dɛn kin advays fɔ tɛst am.

Pɔfɔmɛnshɔn Dɛgradɛshɔn Thrɛshɔld – Ustɛm Dɛn kin Kɔnsidɛrɛ se Tep dɔn dɔn?

Di kɔr jɔjmɛnt rul: Ki pefɔmɛns fɔ di tep nɔ fɔ degrad pas di trɛshɔld we dɛn dɔn spɛsifa we dɛn kip am ɔnda kɔndishɔn dɛn we dɛn nid. Di industri jenɛral standad se di dɛgradɛshɔn fɔ bi less dan 30%.

1. Pεl strכng (adheshon) – praymar indikεtכr

• Rikwaymɛnt: Digradɛshɔn less dan 30% frɔm di fɔs valyu.

• Wetin mek i impɔtant: Silikɔn prɛshɔn-sɛnsitiv adhesive kin dray, ɔksidayz, ɔ transfa to di bak as tɛm de go.

• Akseptans: 180° peel strכng nכ fכ dכn dכn 70% fכ di initial valyu.

2. Rɛsidyu ɛn unwinding pefɔmɛns

Tep we dɔn pas kin sho:

• Abnɔmal ay unwinding fɔs (i at fɔ pul ɔf di rol) .

• Silikɔn transfɔm na di bak (shayn mak ɔ adhesive film na di nɔ-stik sayd)

• Blak spat ɔ string adhesive residue afta dɛn dɔn put am ɛn kol am

• Ɛni adhesive residue we yu kin si afta dɛn pul am min se di tep nɔ kwalifay.

3. Tεmpratura rεsistεns – lכs כf hεt rεsistεns

We dɛn put am na ay tɛmpracha (ɛgz., 260°C), tep we dɔn pas kin:

• Carbonize ɛn tɔn yɔlɔ

• Krak ɔ pul am kɔmɔt

• Lɔs prɔpati we nɔ de stik

Akseptans: Kwalifay tep nɔ fɔ kabɔn, krak, ɔ kɔmɔt afta dɛn dɔn bek am na di tɛmpracha we dɛn dɔn rayt.

4. Dielektrik trɛnk (fɔ ilɛktrik insuleshɔn tep dɛn) .

• Rikwaymɛnt: Brekdɔwn vɔlɔt fɔ de ɔp 80% pan di rayt valyu insay shelf layf.

• Wetin mek: di maykro-por dεm we de mek dεn ol na di adhesive layεr de mek di vכltεj rεsistεns dכn shap.

Kwik Inspekshɔn Mɛtɔd dɛn – Aw fɔ Tɛst Tep we dɔn dɔn

If yu gɛt wan rol we dɔn pas in shelf layf we dɛn rayt (ɔ di kɔndishɔn we dɛn bin de kip am bin de aks kwɛstyɔn bɔt), yuz dɛn tri simpul tɛst ya fɔ chɛk if i stil ebul fɔ yuz am.

1. Test 1 – Manual unwinding fil

• Aw: Pil wan lɔng tep frɔm di rol wit nɔmal spid.

• Wetin fɔ luk fɔ: Di rilis layna (ɔ di bak) fɔ rilis fayn fayn wan. If i at fɔ pul am, ɔ di adhesive surface fil taky wit mak dɛn we pɔsin kin si, silikon transfa dɔn apin.

• Rizult: If i at fɔ unwind ɔ mak dɛn we pɔsin kin si → trowe di tep.

2. Test 2 – Tɛst we gɛt ay tɛmpracha rɛsɛdyu

• Aw: Ataya wan sampul fɔ di tep to wan klin stenlɛs stiɛl plet. Bek na 260°C fɔ 30 minit . Alaw am fɔ kol, dɔn pul di tep.

• Wetin fɔ luk fɔ: Yɔlɔ stɛyn, blak spat, ɔ hazy rɛsɛdyu na di stɛl plet.

• Rizult: Ɛnitin we yu kin si → tep kin pwɛl . Gud tep go mek di plet klin pafɛkt wan.

3. Tɛst 3 – Lamineshɔn ɛn shrinkage tɛst

• Aw: Put di tep pan sabstret (ɛgz., mɛtal plet) ɛn ɔt am to di tɛmpracha we yu want fɔ wok (ɛgz., 200°C). Obshɔb afta yu dɔn kol.

• Wetin fɔ luk fɔ: I klia se i de shrink (tep de pul bak frɔm di ed dɛn) ɔ i de blista.

• Rizult: Shrinkage ɔ blistering min se di ɔt rɛsistɛns dɔn fel → riples di tep.

Stɔrej Bɛst Prɛktis – Ɛkstɛnd Shelf Layf

Fɔ mek yu ebul fɔ yuz di layf we PTFE ay-tɛmpracha tep gɛt, fala dɛn gaydlayn ya:

• Fɔs in, fɔs aut (FIFO): Yuz ol stok bifo nyu rol.

• Kip di ɔrijinal pak: Di plastic wrap de protɛkt frɔm dɔst ɛn humidity. If yu opin am, ri-sial wit plastic film.

• Nɔ put tin dɛn we yu de stak: Nɔ put ebi ebi tin dɛn pan tep rol dɛn. Yuz difrɛn rɛk dɛn.

• Rotate stok kwata wan: If yu de kip fɔ lɔng tɛm, tɔn di rol dɛn fɔ chenj prɛshɔn pɔynt dɛn.

• Monitor stɔrɔj ​​kɔndishɔn: Yuz tɛmpracha/humiditi data lɔga if nid de.

• Lebul wit di de: Rayt di de we dɛn mek am ɔ di de we dɛn go gɛt am na ɛni rol.

Aokai PTFE de print di prodakshɔn de dɛn pan ɛni rol lɛbl. Wi kin se yu fɔ yuz tep insay 6 mɔnt afta dɛn dɔn mek am fɔ impɔtant aplikeshɔn dɛn. Fɔ yuz we nɔ impɔtant, di tep we dɛn dɔn kip fayn kin kɔntinyu fɔ wok fɔ 12 mɔnt ɔ mɔ – bɔt ɔltɛm tɛst bifo yu put am na prodakshɔn.

Sɔma – Ki Takeaways

Aokai PTFE de mek PTFE ay-tɛmpracha tep wit kɔnsistɛns kwaliti ɛn label prodakshɔn deti. Fɔ lɔng tɛm stɔrɔj, wi de gi mɔstɔ-baria pak we yu aks fɔ. If yu gɛt ol tep ɛn yu nɔ shɔ bɔt in kɔndishɔn, du di 260°C rɛsɛdyu tɛst bifo yu yuz am fɔ prodakshɔn.

Di tin dɛn we de ɔp na... Jiangsu Aokai Nyu Matirial Teknɔlɔji Kɔmni, Ltd.

If yu want fɔ lan mɔ bɔt ditayl spɛsifikɛshɔn, aplikeshɔn sɛnɛriɔ ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful prodak rɛnj, inklud PTFE ay-tɛmpracha fabrik, PTFE ay-tɛmpracha tep, PTFE mɛsh bɛlt, simlɛs bɔnding mashin bɛlt, singl-sayd PTFE klos, ay-tɛmpracha rɛsistant kɔnvaysɔ bɛlt ɛn ay-tɛmpracha rɛsistant fayvglas fabrics, duya kɔntakt wi:

• Mista Guo: +86 18944819998 kin yuz am

• Mista Liu: +86 13705266308 yuz am

Wi de fala di prinsipul dɛm fɔ profeshɔnal ɛn ɔnɛs, ɛn wi dɔn mekɔp wi maynd fɔ gi yu wan-stɔp sɔlvishɔn ɛn savis dɛm we wi de tink bɔt.