PTFE Vs Silicone Fabric: 7 Ki Difrɛns dɛn we Yu Fɔ No

We yu de pik fayv glas klos we dɛn kɔt fɔ yuz na di industri – ilɛksɛf na fɔ ɔt sial, rilis layna, ilɛktrik insuleshɔn, ɔ fɔ protɛkt faya – tu nem dɛn kin kam bɔku tɛm: PTFE ay-temperature fabrik ɛn silikon fabrik.

Dɛn tu bigin wit di sem ay-strɛng fayba glas bays, bɔt dɛn sɔfa kɔtin (PTFE rɛsin vs silikon rɔba) de mek dɛn gɛt dramatik difrɛn pefɔmɛns profayl. If yu pik di rɔng wan, dat kin mek yu wɛr am bifo tɛm, yu kin stɔp fɔ yuz di tin dɛn we yu de yuz fɔ mek di tin dɛn, ɔ ivin pwɛl di tin dɛn we yu de yuz fɔ wok.

Aokai PTFE dɔn de mek ɔl tu di kayn dɛn fɔ bɔku bɔku ia. Dis sayd-bay-sayd kɔmpiashɔn de kɔba tɛmpracha rɛsistɛns, fleksibiliti, nɔ-stik pefɔmɛns, wear rɛsistɛns, kemikal stebiliti, ilɛktrik insuleshɔn, ɛn faya sef – so yu kin mek di rayt chuk.

Na wan Glance – PTFE vs Silikɔn Fabrik Kɔmpiashɔn Tebul

Temperature Resistance – Usay PTFE De Tek di Lid

PTFE ay-tεmpratura fabrik de wok stedi frכm -70°C to 260°C εn i kin tinap te to 350°C fכ sכt tεm. Dis kin mek i fayn fɔ bek ɔvin, ɔt silɔ, ɛn ay-tɛmpracha kɔnvayɔr sistem.

Silikɔn klos gɛt maksimal kɔntinyu wok tɛmpracha we na lɛk 230°C. Fכ aplikεshכn dεm we kכnsistεnt oba 230°C, PTFE na di mכr rilibul chכys.

Rial-wɔl impak: Insay 250°C drying oven, silikon fabrik kin bigin fɔ chenj in kɔlɔ ɛn lɔs elasticity insay mɔnt, we PTFE fabrik kin stil stebul fɔ ia.

Fleksibiliti & Fizik Fɔm – Silikɔn Win fɔ Kɔnfɔmabiliti

Ustɛm fɔ pik silikon: Aplikeshɔn dɛn we nid fɔ tayt bɛnd, fold, ɔ kɔmpreshɔn – lɛk fleksibul dakt kɔnɛkta, gasket fɔ say dɛn we nɔ rɛgyula, ɔ kɔva dɛn we dɛn kin pul.

Aokai PTFE de gi yu ɔl tu di kayn klos dɛn. Bɔku tɛm wi kɔstɔma dɛn kin bigin wit PTFE fɔ in nɔ-stik bɛnifit dɛn, dɔn dɛn kin chenj to silikon nɔmɔ we dɛn nid fɔ mek dɛn ebul fɔ chenj ɔ ilɛktrik insuleshɔn. Fɔ mɔs industrial ɔt aplikeshɔn, PTFE in stiffness na manejable wit prɔpa instɔleshɔn tɛknik (nɔ shap fold).

Nɔn-Stik & Rilis Pɔfɔmɛnshɔn – PTFE Nɔ Match

PTFE gɛt wan pan di lɔs kɔfishin dɛn fɔ frikshɔn pan ɛni sɔlid (≈0.05-0.1). Klosap natin nɔ de stik to am – pas insɛf. Dis mek PTFE ay-tɛmpracha fabrik di gold standad fɔ:

• Baking sheet ɛn ɔvin layna (fud kin rilis izi wan) .

• Ɔt silin mashin kɔva dɛn (plastik we dɔn mɛlt nɔ de adhere) .

• Kɔnvaysɔ bɛlt fɔ stika prɔdak dɛn (chiz, kandy, tin dɛn we dɛn kin yuz fɔ adhesive) .

Silikɔn klos gɛt frikshɔn ɛn rɔba say. I kin trap dɔst ɛn i nɔ de gi ɛni impɔtant bɛnifit we nɔ de stik. Infakt, silikon kin tacky we di ples wam ɛn i kin tay to sɔm tin dɛn.

Wear & Abrasion Resistance – PTFE de las fɔ lɔng tɛm

Tɛnki fɔ PTFE in rili lɔw frikshɔn kɔfishin, PTFE fabrik de gi ɔdasayz wear rɛsistɛns – slaydin pat dɛn, skrapa bled dɛn, ɛn prɔdak kɔntakt de mek smɔl sɔfays damej.

Silikɔn klos kin saf ɛn i kin wɛr fast ɔnda abrashɔn. Insay kɔnvayɔr bɛlt aplikeshɔn wit frɛkuɛnt skrap ɔ slaydin kɔntakt, silikon fabrik kin nid fɔ riples 3-5 tɛm pas PTFE.

Kεmikכl & Envayroment Stebiliti – PTFE fכ Harsh Midia

Ki tek-away: Fɔ kemikal plant, laboratori, ɔ ɛni envayrɔmɛnt we gɛt sɔlvɛnt ɛksplɔshɔn, PTFE na di klia wina.

Ilɛktrik Insuleshɔn & Faya Resistɛns – Silikɔn in Strɔng

Ilɛktrik insuleshɔn: Silikɔn klos na prɛmiɔm ilɛktrik insuleshɔn we ebul fɔ bia wit ay vɔltɛm lod. Dɛn kin yuz am bɔku bɔku wan fɔ:

• Bus bar insuleshɔn wraps

• Transfoma ɛn kebul insuleshɔn

• Kɔva dɛn we de protɛkt pɔsin we gɛt ay vɔlɔt

PTFE fabrik de gi ɔl di avrej insulin prɔpati dɛn ɛn i nɔ tipikul fɔ spɛsifa fɔ ilɛktrik aplikeshɔn dɛn.

Faya resistans: Dis na big tin we silikon klos gɛt. I nɔ de bɔn, i nɔ de mek di ples wam, ɛn dɛn kin mek am lɛk:

• Faya blanket fɔ mek di industrial sef

• Faya kɔtin ɛn tin dɛn we de mek pɔsin nɔ smok

• Welding protɛkshɔn skrin dɛn

Wail PTFE fabrik na flame retardant, i nɔto praymar matirial fɔ fayapruf aplikeshɔn.

Atikul prɔpati – wɛda rɛsistɛns: Silikɔn fabrik bak bost spɛshal weta rɛsistɛns fɔ lɔng tɛm ɔdasay savis, wit savis layf we go rich 10 ia ɔnda UV ɛksplɔshɔn. PTFE fabrik de dεgrad bכku sloslo na do (30+ ia) bכt i kin bi brit we i kol pasmak.

Sɔma – Aw fɔ Pik Bitwin PTFE ɛn Silikɔn Fabrik

In sɔmari , PTFE ay-tɛmpracha fabrik ɛn silikon fabrik ɛvri wan gɛt difrɛn trɛnk. PTFE fayn fayn wan pan nɔ-stik, tɛmpracha rɛsistɛns (260°C), wear resistans, ɛn kemikal inɛtnɛs – we mek am di tɔp chuk fɔ it prɔsesin, ɔt silin, ɛn kemikal ɛnvayrɔmɛnt. Silikɔn klos de shayn insay fleksibiliti, ilɛktrik insuleshɔn, ɛn faya protɛkshɔn – i fayn fɔ ilɛktrik rap, faya blanket, ɛn fleksibul kɔnɛkshɔn.

Nɔto pan dɛn tu tin ya na ɔlsay 'bɛtɛ' – di rayt chukchuk dipen pan yu ɔpreshɔn tɛmpracha, kemikal ɛksplɔshɔn, mɛkanikal rikwaymɛnt, ɛn badjɛt.

Yu nid ɛp fɔ disayd? Aokai PTFE de saplae ɔl tu di PTFE ɛn silikon fabrik dɛn we gɛt difrɛn tik ɛn wit. Kɔntakt wi tɛknikal tim wit yu aplikeshɔn ditil fɔ wan rɛkɛmɔndeshɔn.

Dis kɔntinyu na Jiangsu Aokai Nyu Matirial Tɛknɔlɔji Kɔmni, Ltd.

If yu nid ditayl paramita, aplikeshɔn kes, ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful-rɛnj prodak dɛn we inklud PTFE ay-tɛmpracha fabrik, PTFE ay-tɛmpracha tep, PTFE mɛsh bɛlt, simlɛs fiuzin mashin bɛlt, singl-sayd PTFE kɔt fabrik, ay-tɛmpracha kɔnvaysɔ bɛlt ɛn ay-tɛmpracha fayvglas klos , duya fil fri fɔ kɔntakt wi:

• Mista Guo: +86 18944819998 kin yuz am

• Mista Liu: +86 13705266308 yuz am

Wi de fala di filɔsofi fɔ profeshɔnal ɛn intɛgriti, ɛn wi dɔn mekɔp wi maynd fɔ gi wan-stɔp sɔlvishɔn ɛn kɔnsidaret savis to ɔl di kɔstɔma dɛn.