Wetin Limit Di Savis Layf fɔ PTFE Ay-Tɛmpratura Fabrik?

PTFE ay-tɛmpracha fabrik na wɔndaful tin we de te – i kin bia fɔ lɔng tɛm fɔ ɔt, kemikal ɛksplɔshɔn, ɛn nɔ-stik savis. Bɔt as tɛm de go, i nɔ kin wok. Di kwɛstyɔn na: wetin kin mek i nɔ wok, ɛn aw yu go mek i las fɔ lɔng tɛm?

Di ansa gɛt fɔ du wit siks kayn tin dɛn: tɛmpracha (di big wan), mashin strɛs, kemikal ɛnvayrɔmɛnt, di we aw dɛn de klin, di we aw dɛn de kip am, ɛn di fɔs kwaliti we di klos insɛf gɛt.

Aokai PTFE dɔn analayz fil fayl akɔdin to tawzin aplikeshɔn dɛn. Dɔŋ ya wi de ɛksplen ɛni wan pan di tin dɛn, aw fɔ no di sayn dɛn we de wɔn pɔsin kwik kwik wan, ɛn wetin yu kin du fɔ mek yu liv lɔng.

Temperature – Di Praymari Kila

PTFE kin ebul fɔ handle ay ɔt, bɔt na te to wan pɔynt nɔmɔ. Pas da pɔynt de, ɛn di pwɛl pwɛl kin go kwik kwik wan.

1. Kɔntinyu fɔ ɔpreshɔn ɔva-tɛmpracha

Di maksimal lɔng tɛm kɔntinyu ɔpreshɔn tɛmpracha fɔ PTFE na lɛk 260°C . Fɔ shɔt tɛm fɔ go na 300°C na tin we pɔsin kin gri wit, bɔt we pɔsin kin de fɔ lɔng tɛm pas 260°C i kin mek:

• Yɔlɔ ɛn embrittlement fɔ di kɔtin

• Lɔs fɔ prɔpati we nɔ de stik

• Dikɔmpɔzishɔn (we pas 400°C, we de pul pɔyzin gas dɛn) .

• Mekanikal trɛnk ridɔkshɔn

Fil obsכbishכn: PTFE kכnvayכr bεlt we de rכn na 280°C insted fכ 250°C kin las כnli 6 mכnt insted fכ 3 ia.

2. Ripit fɔ ɔt ɛn kol kwik kwik wan (tɛmal shɔk) .

PTFE kotin ɛn fayv glas sabstret gɛt difrɛn kɔfishin dɛn fɔ tɛmal ɛkspɛnshɔn. We dɛn dɔn wam di klos ɛn kol kwik kwik wan ɛn bɔku bɔku tɛm:

• Di kɔtin de pan ɛn kɔntrakt difrɛn rit pas di glas fayv dɛn

• dis kin mek delamination bitwin layεr dεm → krak krak, blista, εn separeshכn

• Patikul siriɔs na di fabrik ed ɛn rawnd mɛkanikal fastɛns

Fɔ mek yu nɔ gɛt dis sik: Nɔ chenj di tɛmpracha wantɛm wantɛm. Usay dɛn nɔ go ebul fɔ avɔyd fɔ saikl wit tɛmal, pik wan klos we gɛt bɛtɛ adheshon (proper surface treatment of the glass) ɛn avɔyd shap fold.

Mɛkanikal Strɛs – Bɛnd, Tɛnshɔn, ɛn Abrashɔn

PTFE-coated fiberglass strɔng pan tɛnsiɔn bɔt wik pan ripit bɛnd. Bɔku tɛm, mɛkanikal strɛs na di sɛkɔn tin we kin mek pɔsin nɔ wok fayn afta we di ples wam pasmak.

1. Ripit fɔ bɛn ɛn kris

Pan ɔl we PTFE fabrik kin fleksibul, di fayv glas sabstret gɛt po fleks rɛsistɛns. Kɔnstant folding ɔ pɔrmanent kris na di sem pozishɔn go:

• Brek di glas fayv dɛn

• Krak di PTFE kotin

• Krio wayt kris mak dεm we nכ de rivεrs we de prכpagεt kwik kwik wan to kray wata

Prɛvenshɔn: Yuz di big wan we pɔsibul fɔ bɛn rayus. Fɔ aplikeshɔn dɛn we nid fɔ fold bɔku tɛm (ɛgz., kɔtin dɛn we pɔsin kin muv), tink bɔt wan gred we tan ɔ aramid-riinfɔs PTFE fabrik.

2. Fכs we de tεnshכn pasmak

We dɛn yuz am as kɔnvayɔri bɛlt, ɔva-tɛnshɔn kin mek:

• Fayba taya (glas fayv dɛn kin brok smɔl smɔl ɔnda sustained lod) .

• Difɔmeshɔn fɔ kɔtin (stretch ɛn tinin) .

• Smɔl smɔl i kin slak ɛn leta i kin te

Fɔ mek yu nɔ gɛt dis sik: Fɔ fala di tɛnsiɔn rɛnj we di wan we mek am se. Fɔ kɔnvaysɔ we gɛt lɔng span, yuz klos we gɛt ay tɛnsiɛl trɛnk (ɛgz., wev we ebi ɔ klos we wayd).

3. Kɔntinyu fɔ frikshɔn ɛn abrashɔn

Lɔng tɛm slaydin kɔntakt wit had ɔ rɔf tin dɛn de wear ɔf di PTFE kɔtin. We di kɔtin dɔn go, di fayv glas fayv dɛn we de na do kin rɔtin ɛn nɔ kin wok kwik kwik wan.

Prɛvenshɔn: Fɔ slayv aplikeshɔn (ɛgz., gayd rel), yuz wan ful PTFE gred wit impɔtant abrashɔn rɛsistɛns ɔ ad wan wear strip. If yu de lobrik am ɔltɛm (silikon ɔyl we yu kin yuz fɔ it) kin mek bak di frikshɔn nɔ bɔku.

Kεmikכl Envayroment – ​​Nɔto Ɔl Kεmikכl Dɛn Sef

PTFE na fambul inert, bכt sכm kεmikכl dεm de atak am – spεshal wan pan hכy tεmprachכ.

1. Strɔng ɔksidɛnt ɛn aktif mɛtal dɛn

Na ay tempɔret, kɔntakt wit di wan dɛn we de dɔŋ ya go kɔrɛkt PTFE dairekt wan:

• Alkali mεtal dεm we mכlt (sכdiכm, potashכm) – komplit dεstrukshכn

• Klorin trifluoride, fluorine gas – vaylɛnt riakshɔn

• strכng asid dεm we kכnsantreyt bכku bכku wan – sכmtεm eroshכn na εlevεt tεmprachכ

Fɔ mek yu nɔ gɛt dis sik: Nɔ tek dɛn kemikal ya ɔltogɛda. Fɔ aplikeshɔn dɛn we gɛt fɔ du wit agresiv ɔksidayza, yuz difrɛn matirial ɔ mek shɔ se di PTFE klos nɔ de na do dairekt wan.

2. Sכbstans dεm we gεt silikon εn gris we de go insay

fכ lכng tεm we di ay tεmprachכ hεt tכnfכs כyl, silikon rilis ejen, כ fכd gris go insay maykro-por dεm na di kכt kin mek:

• Kabonizashɔn ɛn kɔk ɔnda di kɔtin

• Blistering ɛn delamination we dɛn ɔt am

Fɔ mek yu nɔ du am: Klin di klos ɔltɛm bifo di tin dɛn we lɛf gɛt tɛm fɔ go insay. Fɔ mek yu gɛt ebi ɔyl, pik wan sabstret we densa (we gɛt ay trɛd kɔnt) sabstret.

Klin ɛn Handling – Aw Yu Klin Impɔtant

Fɔ klin di rayt we na kɔmɔn tin we kin mek i nɔ wok kwik kwik wan, we pɔsin kin ebul fɔ avɔyd.

1. Skrap di kabɔnayz rɛsɛdyu dɛn

Bɔku tɛm, dɛn kin yuz mɛtal shovel, stɛl wul, ɔ pad fɔ skrap it, adeziv, ink, ɔ ɔda tin dɛn we dɔn at. Dɛn tul ya de skrach di PTFE kɔtin . We dɛn dɔn skrach am, di prɔpati we nɔ de stik kin lɔs, ɛn di kɔntaminɛshɔn kin stik izi wan – we kin mek wan bad bad saykl.

Kɔrɛkt we: Yuz plastic skrap, wud spatula, ɔ saf naylon brɔsh. Fɔ stɛp-bɔn rɛsɛdyu, sok ɔ stim-sɔft bifo yu was.

2. Di tin dɛn we nɔ fayn fɔ klin

PTFE insεf na kεmikכl inεt, bכt di adhesive layεr (fכ tep) כ di intafεys bitwin kכt εn sabstεrayt kin atak. Fɔ sok fɔ lɔng tɛm insay:

• Strɔng sɔlvɛnt dɛn (we de pul di pent, asɛtɔn) .

• Ditajɛn dɛn we gɛt bɔku pH (blich, kɔstik klin) .

...i kin pas tru pinhol dεm εn wik di bonding bitwin kכt εn sabstεrayt.

Kɔrɛkt we fɔ du am: Yuz sop we nɔ de mek yu it, wam wata, ɔ tin dɛn we yu kin yuz fɔ klin di it. Rinse am fayn fayn wan.

Stɔrej ɛn Envayrɔmɛnt Kɔndishɔn

Ivin we dɛn nɔ de yuz am, PTFE klos kin pwɛl if dɛn nɔ kip am fayn.

1. Fɔ de na UV fɔ lɔng tɛm

PTFE gɛt fayn fayn wɛda rɛsistɛns, bɔt fɔ lɔng tɛm we yu de pan di bad bad UV we de na do go mek:

• Smɔl smɔl di surface de ol

• Chalking (wayt paoda na di surface) .

• Ridyus tɛnsiɛl trɛnk

Prɛvenshɔn: Fɔ aplikeshɔn dɛn na do, pik UV-stabilized gred dɛn. Fɔ di klos we dɛn dɔn kip, kip am na say we dak ɛn we dɛn kɔba.

2. Dampness ɛn mildew

If di kɔtin dɔn pwɛl, di wata kin go insay di fayv glas gap dɛn ɛn i kin mek di fayv nɔ gɛt trɛnk igen. di asid dεm we di mildewed fכd rεsidεns dεm de prodyuz de kכrod bak di bכndin intafεys.

Fɔ mek yu nɔ gɛt am: Stɔr di klos na say we dray. Klin am bifo yu kip am. Nɔ lɛf dɔti klos we dɛn dɔn rol fɔ sɔm mɔnt.

3. Fɔ kip tin dɛn we nɔ rayt

• we yu fכl fכ lכng tεm כnda hεvi prεshכn i de mek di kris dεm we de fכ de sote go (prεmature fεil pכynt dεm).

• We yu kip am nia say dɛn we di ples wam (stim paip, ɔvin) i kin mek i ol kwik kwik wan.

Kɔrɛkt stɔrɔj: Rol di klos lɔs pan wan kɔr, kip am vertikal if i pɔsibul, na say we kol (10-30°C), dray (<60% RH), dak ples.

Manufacturing Quality – Yu Gɛt Wetin Yu Pe Fɔ

Nɔto ɔl di PTFE klos dɛn dɛn mek ikwal. Difrɛns bitwin kwaliti dɛn kin afɛkt di savis layf bad bad wan.

1. Kotin tik ɛn yunifom

If yu nɔ tik di kɔtin, di pinhol dɛn, di ay bɔbul dɛn, ɔ di impregnation ɛn sintering we nɔ fayn go mek di savis layf shɔt bad bad wan. Di tin dɛn we gɛt ay kwaliti prɔdak dɛn:

• Ful enkapsuleshɔn fɔ glas fayv dɛn

• Strɔng adheshon bitwin kɔtin ɛn sabstret

• Nɔ pinhol ɔ void nɔ de

• Superior fatigue resistans fɔ mek yu taya

2. Di kayn sabstret

Di we aw dɛn mek am, di filament dayamita, ɛn di wet we di fayv glas klos gɛt de sho aw i de wok wit mashin. Tin ɔ big-big mɛsh klos dɛn we nɔ fayn fɔ di wok we dɛn de du kin west kwik kwik wan.

Aokai PTFE de yuz prɛmiɔm fayv glas sabstret wit ɔptimayz wev dɛnsiti ɛn ful PTFE impregnashɔn. Wi de gi tɛknikal data bɔt tɛnsiɛl trɛnk, kɔtin tik, ɛn pinhol kɔnt.

Sɔma – Aw fɔ Maksimayz PTFE Fabrik Savis Layf

Aokai PTFE de mek PTFE ay-tɛmpracha fabrik to ay kwaliti standad. Wi kin ɛp yu fɔ pik di rayt gred, tik, ɛn wef fɔ yu aplikeshɔn fɔ mek yu ebul fɔ liv yu layf mɔ.

Di infɔmeshɔn we de ɔp na... Jiangsu Aokai Nyu Matirial Teknɔlɔji Kɔmni, Ltd.

Fɔ spɛsifikɛshɔn, aplikeshɔn gayd, ɛn kɔstɔm sɔlvishɔn fɔ PTFE ay-tɛmpracha fabrik, tep, mɛsh bɛlt, ɛn mɔ:

• Mista Guo: +86 18944819998 kin yuz am

• Mista Liu: +86 13705266308 yuz am

Wi de fala di prɔfɛshɔnal ɛn intɛgriti, tray fɔ gi wan-stɔp sɔlvishɔn ɛn kɔnsidareshɔn savis.