Nukae nye ŋusẽ si web tension control kpɔna le Teflon high-temperature tape ƒe nutsyɔtsyɔ ƒe dɔwɔwɔ me ɖe PTFE substrate ƒe gbadzaƒe kple adhesive coating ƒe ɖekawɔwɔ dzi?

I. Ŋusẽkpɔɖeamedzi ɖe PTFE Substrate ƒe Flatness dzi

1. Plastik Kekeɖenudɔwɔwɔ kple 'Kɔ' Ŋusẽkpɔɖeamedzi

PTFE nu la ƒe elastic modulus le bɔbɔe. Ne teteɖeanyia nya wu eƒe elastic seɖoƒe ko la, plastic ƒe keke si womate ŋu atrɔ o dzɔna, si wɔnɛ be wòdidina le didime nu eye wòtsia tsia dzi. Ne woɖe asi le teteɖeanyia ŋu vɔ la, nusi le ete la mete ŋu gatrɔna va ɖoa eƒe nɔnɔme gbãtɔ me o, si wɔnɛ be eƒe lãme ƒuna, eƒe ʋuʋudedi nɔa didiƒe, eye eƒe titrime mesɔ o. Le nɔnɔme sesẽwo me la, ƒutsotsoe siwo le tsia dzi ate ŋu adzɔ.

2. Creep (Cold Flow) ƒe Nuƒoƒoƒu Le Ɣeyiɣi aɖe megbe

PTFE toa plastic ƒe sisi blewu me le teteɖeanyi si nɔa anyi ɖaa te. Le nusi wotsɔ blaa nu me la, nusi wotsɔ blae la fa ne wodo dzoe le dzodoƒe si wotsɔ ƒua gbe la me, eye ʋuʋudedi nu sẽna ɖe edzi. Kekeɖenudɔ sia si mesɔ o la va zua 'tsikpe' le fafa megbe, si wɔnɛ be anyigba ƒe goglome ƒe masɔmasɔ alo ʋuʋudedi siwo didi, si womate ŋu aɖe ɖa to dɔwɔwɔ siwo kplɔe ɖo me o.

3. Transverse Tension si Mesɔ O

Mɔfiame ʋuƒo siwo mewɔ ɖeka nyuie o alo nugbɔ ƒe mɔfiafia si mesɔ o ateŋu ana vovototo nanɔ goawo kple titina dome le teteɖeanyi me, si ana 'nugbɔ siwo woƒo,' titina ƒe ʋuʋudedi, alo axa ɖeka ƒe ʋuʋudedi. Tsitretsitsi ƒe tɔtrɔ siwo dzɔna ɣeaɖewoɣi hã ateŋu ahe 'tight-loose marks' siwo trɔna ɖe anyigba ƒe anyigba dzi, si agblẽ nu le gbadzaƒe ŋu tẽ.

II. Ŋusẽkpɔɖeamedzi ɖe Adhesive Layer ƒe Coating Uniformity dzi

1. Tension ƒe Tɔtrɔwo Trɔa Coating Gap

Le hɛ si wotsɔ blaa nu ɖe ​​edzi me la, tete ɖea alesi gbegbe nusi wotsɔ blaa nu kple ɖɔkta ƒe asikea ka ɖe edzii tẽ. Ne tete ɖe edzi zi ɖeka la, womia nusi le ete la sesĩe wu, si wɔnɛ be nusi wotsɔ blae ƒe kpekpeme dzi ɖena kpɔtɔna; ne teteɖeanyi dzi ɖe kpɔtɔ la, nusi le ete la ɖea asi le eŋu, si wɔnɛ be nusi wotsɔ blae ƒe kpekpeme dzina ɖe edzi. Trɔtrɔ mawo hea tɔtrɔwo vɛ ɣeaɖewoɣi le adhesive layer ƒe titrime me le web ƒe mɔ dzi, si woyɔna be 'crosswise streaks' alo 'zebra marks.'

2. Substrate ƒe kekeme kpɔa ŋusẽ ɖe adhesive ƒe kaka dzi

Teteɖeanyi si gbɔ eme nana PTFE film la nɔa sue eye wònaa fli suesuesuewo dona, eye emegbe wogbugbɔna toa nusi wotsɔ blaa nu ɖe ​​anyigba si mesɔ o dzi. Ne woɖe asi le teteɖeanyi ŋu eye film la tsi megbe la, nusi léna ɖe nu ŋu la ate ŋu agbã nu suesuesuewo le nuteɖeamedzi si mesɔ o ta. Le avɔ siwo wotsɔ fiberglass wɔe gome la, tete si gbɔ eme nana ka ƒe dometsotsowo lolona, ​​si wɔnɛ be nusiwo léna ɖe wo nɔewo ŋu gena ɖe eme fũ akpa, womeléa wo ɖe wo ŋu nyuie o, eye woƒe akpa si wotsɔa nu ƒoa nui la nɔa ƒuƒlu.

3. Coupled Ŋusẽkpɔɖeamedziwo Le Dzoxɔxɔ Kple Kukuɣi

PTFE ƒe dzoxɔxɔ ƒe kekeɖenudɔwɔwɔ ƒe xexlẽdzesi gã aɖe le esi. Le dzodoƒe si wotsɔ ƒua gbe la me la, ne teƒe geɖe ƒe teteɖeanyi ƒe ɖoɖowo mewɔ ɖeka o la, nusi wotsɔ dzoxɔxɔ fa la toa keke evelia me, si trɔa asi le nulénu si xɔ dzo la ŋu kpe ɖe eŋu, si wɔnɛ be nutsyɔnu si le sue wu eye mesɔ o le etutu vɔ megbe. Teteɖeanyi si mesɔ o le fafaƒea hã ate ŋu ana ʋuʋudedi naɖe le aŋenu si ƒu afã kple afã la me.

III. Mɔnu Veviwo Dzi Kpɔkpɔ

1. Akpa Siwo Wotsɔ Ðea Nu Kple Nusiwo Wotsɔna Ðea Nu

Ele be woatsɔ tete si bɔbɔ ŋutɔ eye wòanɔ anyi ɖaa, si sɔ gbɔ ko be wòaxe mɔ na nusi wotsɔ blae la be wòagavuvu o, si ana wòage ɖe nusi wotsɔ blae la me le dzɔdzɔmenɔnɔme me eye wòaƒo asa na keke do ŋgɔ.

2. Kuku Kple Fafa ƒe Akpawo

Ele be woazã asitɔtrɔ nyuie pɛpɛpɛ to ʋuƒo siwo le tsia dzi dzi atsɔ axe fe ɖe dzoxɔxɔ ƒe kekeɖenudɔwɔwɔ kple anyigba ƒe tete ta vevie, eye ele be woaƒo asa na teteɖeanyi gã le teƒe siwo dzoxɔxɔ le ŋutɔ.

3. Akpa si Wogbugbɔa Trɔna

Ele be woaxɔ taper tension, vivivi la, woaɖe nip ƒe nyaƒoɖeamenu dzi akpɔtɔ ne roll la ƒe didime le dzidzim ɖe edzi, be woaxe mɔ ɖe nusiwo wofa ɖe edzi la ƒe gbegblẽ alo 'transferring' masɔmasɔ tso ƒuƒoƒo siwo le ete gbɔ yi ƒuƒoƒo siwo te ɖe wo nɔewo ŋu me o.

IV. Totoɖeme

Teteɖeanyi dzi ɖuɖu si woma ɖe akpa vovovowo me pɛpɛpɛe nye nu vevitɔ si ana woada asɔ le PTFE substrates ƒe nɔnɔme siwo le dzɔdzɔme nu—si nye ʋuʋudedi si mebɔ o kple alesi woate ŋu aʋuʋu bɔbɔe—kple nudidi si nye be adhesive layer nawɔ ɖeka. Eɖoa Teflon tape ƒe dɔwɔwɔ mamlɛtɔ tẽ le dɔwɔwɔwo abe dzoxɔxɔ gã ƒe tsitretsitsi kple asiɖeɖe le eŋu ƒe nɔnɔmewo ene me.

Nyatakaka siwo le etame la tso... Jiangsu Aokai Nu Yeye Mɔ̃ɖaŋununya Co., Ltd.

Ne èdi be yeanya nu geɖe tso nyatakaka tsitotsito, dɔwɔwɔ ƒe nɔnɔmewo, kple tɔtrɔ ɖe nɔnɔmewo ŋu ƒe egbɔkpɔnuwo ŋu na míaƒe adzɔnuwo ƒe hatsotso bliboa, siwo dometɔ aɖewoe nye Teflon dzoxɔxɔ gã avɔ, Teflon dzoxɔxɔ gã tape, Teflon dzoxɔxɔ gã mesh alidziblanu, seamless conveyor belts na bonding mɔ̃wo, akpa ɖeka PTFE avɔ, dzoxɔxɔ gã tsitretsitsi conveyor belts, kple fiberglass avɔ si te ŋu nɔa te ɖe dzoxɔxɔ gã nu, taflatse te ɖe mía ŋu faa to esiawo dzi:

Subɔsubɔdɔ ƒe Nyatakakadzraɖoƒe:

Aƒetɔ Guo +86 18944819998  

Aƒetɔ Liu +86 13705266308

Míewɔna ɖe dɔnyala kple subɔsubɔ xexemenunya si dzi woate ŋu aka ɖo dzi ɣesiaɣi, eye míeɖoe kplikpaa tso dzi blibo me be míana egbɔkpɔnu siwo le teƒe ɖeka kple subɔsubɔdɔ si me woalé ŋku ɖo la wò!