Insay printin prɔses – ilɛksɛf na skrin printin, dijital inkjɛt, ɔ ɔt transfɔm – di kɔnvayɔr bɛlt de ple impɔtant pat. I de kɛr di sabstret tru drying oven, UV curing unit, ɔ ɔt prɛs. If di bɛlt stik to ink, i defɔm ɔnda ɔt, ɔ alaw kemikal atak, di kwaliti fɔ print go sɔfa ɛn di tɛm we i nɔ de wok.
PTFE ay-tɛmpracha fabrik (PTFE-coated fiberglass ɔ aramid) de sɔlv dɛn prɔblɛm ya. I de kɔba nɔ-stik rilis, ay ɔt rɛsistɛns, dimɛnshɔnal stebiliti, ɛn kemikal inɛtnɛs insay wan matirial.
Aokai PTFE dɔn de saplae printin kɔnvayɔr bɛlt fɔ bɔku bɔku ia. Dis dɔŋ ya na siks men bɛnifit dɛn we de mek PTFE fabrik na di tin we dɛn kin pik fɔ printa dɛn ɔlsay na di wɔl.
Nɔn-Stik Pɔfɔmɛnshɔn – Nɔ Mɔ Ink Rɛsidyu
Dis na di bɛnifit we pɔsin kin notis wantɛm wantɛm. Printin paste, UV ink, ɛn adeziv nɔ de adhere to di PTFE surface.
1. Wetin i min fɔ yu printin layn
Di bɛlt kin klin ɔl di tɛm we dɛn de rɔn. Nɔ nid fɔ stɔp ɛn skrap di ink we dɔn dray.
di matirial dεm we dεn print de rilis klin wan – nכ smεr, nכ ghosting, nכ transfכm ink bak to di sabstεrayt.
Klin bitwin wok dɛn kin fast – na simpul wayp ɔ sprɛy rins, nɔto fɔ skrap we kin tek bɔku wok.
2. Rial-wɔl impak
We dɛn de print skrin, plastisol ink ɛn paste we dɛn mek wit wata kin lɛf tin dɛn we stika pan kɔmɔn bɛlt dɛn. Wit PTFE fabrik, di belt de stil klin shift afta shift. Insay dijital printin, ink dɛn we UV-curable we kin aksidɛntli ɔva spray nɔ kin bon to di bɛlt.
Hɛt Resistans – Stebul na Dray Tɛmpratura
Bɔku tɛm, di layn dɛn we dɛn kin print kin gɛt tanɛl dɛn we dɛn kin drɛy (50-150°C fɔ ink dɛn we dɛn kin yuz wata), UV lamp dɛn we kin mɛn, ɔ ɔt prɛs fɔ transfa printin (we kin rich 200-230°C). PTFE fabrik de handle dis temperecha wit izi.
1. Ki spesifikeshɔn dɛn
Kontinyu ɔpreshɔn tɛmpracha: -70°C to 260°C
Short-tɛm pik: 300°C ɔ pas dat
nכ tεmכl dεgradashכ n insay dis rεnj – di bεlt nכ de sכft, strεch, כ kכmכt smel
2. Fɔ yuz ɛnaji fayn fayn wan
Bikɔs PTFE klos nɔ de absɔb ɔt lɛk rɔba ɔ mɛtal bɛlt, i nɔ de west ɛnaji fɔ wam di bɛlt insɛf. Mɔ ɔt de go fɔ drɛy di sabstret we dɛn print, we de ridyus di kɔst fɔ ɛnaji ɛn mek di truput go ɔp.
Aokai PTFE not: Fɔ ɔt transfa printin (sublimation), wi PTFE fabrik de tinap fɔ di 200-230°C prɛs tɛmpracha we i de gi nɔ-stik rilis. Nɔ transfa ink to di bɛlt.
Dimɛnshɔnal Stebiliti – Prɛsis Print Rɛjista
Print rɛjista dipen pan di bɛlt we nɔ de strɛch, shrink, ɔ trak ɔf-sɛnta. PTFE fabric de excel na ya.
Ivin pan ay tempɔret (200°C+), dimɛnshɔnal chenj nɔ kin bɔku
Dis de mek shɔ se di print wok dɛn we gɛt bɔku kɔlɔ dɛn de rɛjista ɔl di tɛm we dɛn de rɔn
2. Kɔnsistɛns tɛnsiɔn kɔntrol
Di low stretch min se di tɛnsiɔn sɛtin dɛn de stil stebul. Di bɛlt nɔ de sag ɔ tayt we yu nɔ go ebul fɔ no, we go mek i nɔ alaynɛd fayn ɔ i go mek di ed rɔtin.
3. I de mek di prɔblɛm dɛn we de apin we dɛn de trak di bɛlt
Fɔ wayd-fɔmat printa dɛn (2-3 mita waid), bɛlt trak rili impɔtant. PTFE fabrik, we dɛn sim fayn fayn wan, de rɔn stret we i nɔ de waka waka – i de ridyus di ed damej ɛn di ɔpreshɔn intavɛnshɔn.
Kεmikכl Inεrtnεs – I De Rεsist Kכrosiv Printin Past dεm
Skrin printin paste, sɔlvɛnt, ɛn tin dɛn fɔ klin kin bi agresiv. Ink dɛn we dɛn mek wit PVC gɛt plasticizers. Ink dɛn we dɛn mek wit wata gɛt amin dɛn. UV ink dɛn gɛt monomɛr dɛn. Ɔl kin atak ɔdinari kɔnvaysɔ bɛlt matirial dɛn.
PTFE fabrik de briŋ sɔm ɔda bɛnifit dɛn we de ɛp fɔ mek di printin layn wok fayn.
1. Lɔw sɔfays frikshɔn
Di bɛlt de slayv fayn fayn wan oba gayd plet ɛn rɔla dɛn. Dis de ridyus di drayv moto lod ɛn mek di sabstret nɔ drɛg. Fɔ vaykum kɔnvaysɔ, di lɔw frikshɔn de alaw di bɛlt fɔ muv we di sabstret de fiks.
2. Disɛnt ɛya permiabiliti (mɛsh bɛlt dɛn) .
Opin-mɛsh PTFE bɛlt dɛn de alaw ɔt ɛya fɔ flɔ tru di bɛlt, we de drɛy di tin dɛn we dɛn print frɔm ɔl tu di say dɛn. Dis kin rili ɛp fɔ mek di drying efyushɔn bɛtɛ ɛn i kin ridyus di kɔst fɔ ɛnaji we yu kɔmpia am wit sɔlid bɛlt dɛn.
3. Fleks fatigue rɛsistɛns
PTFE-coated fiberglass de tinap fɔ ripit bɛnd oba smɔl-dayamita rɔla dɛn (dɔwn to 25-30mm rayus). Dis kin mek dɛn ebul fɔ mek kɔmpakt mashin dɛn we nɔ gɛt bɛlt krak.
4. Anti-statik opshɔn
Fɔ printa dɛn we de handle statik-sɛnsitiv sabstret (tin film, pepa na dray ɛnvayrɔmɛnt), anti-statik PTFE fabrik de. Surface resistance 106–109 Ω de dissipate chaj bifo i kin mek spak ɔ matirial kling.
5. Fɔd-grɛd sef
PTFE fabrik nɔ gɛt pɔyzin ɛn i de fala FDA. Fɔ printin fɔ pak it (ɛgz., fleksibul paus), di bɛlt sef fɔ insidɛntal kɔntakt wit tin dɛn we de kɔntakt it.
Fɔ print fɔ pak it: FDA-kɔmpliant gred, izi-klin sɔfays.
Aokai PTFE kin enjinia di ekzak belt fɔ yu printa mek ɛn mɔdel.
Sɔmari – Wetin Mek PTFE Fabrik Na di Ideal Printin Kɔnvaysɔ Bɛlt
Bɛnifit
Bɛnifit fɔ Print
Nɔn-stik we nɔ de stik
No ink residue, izi fɔ klin, klin prodak rilis
Di tin we de mek di wam wam (260°C) .
I de bia wit drying oven ɛn ɔt prɛs we nɔ de pwɛl
Dimenshɔnal stebiliti (<0.5% ɛlɔngɛshɔn) .
Prɛsis mɔlti-kɔlɔ rɛjista, kɔnsistɛns tɛnsiɔn
Kεmikכl inεtnɛs
I nɔ de mek printin paste, sɔlvɛnt, ɛn klin tin dɛn we de rɔtin
Low frikshɔn + breathability
Smol opareshɔn, ɛnaji-efishin drying
Yu kin kɔstɔmayz am
I de insay tik, wef, wit, anti-statik, FDA gred
Aokai PTFE de mek printin kɔnvayɔri bɛlt dɛn we de las pas rɔba, silikon, ɛn kɔmɔn klos bɛlt dɛn fɔ lɔng lɔng tɛm. Fɔ wan printin layn we de rɔn klin, we de rɛjista tayt, ɛn we nɔ nid fɔ mentenɛns smɔl, PTFE fabrik na di ɔpgrɛd.
Kɔntakt wi wit yu printa spesifikeshɔn dɛn (wid, rɔla dayamita, tɛmpracha rɛnj, ɛn ink tayp) fɔ wan bɛlt rɛkɛmɔndeshɔn.
