PTFE High-Temperature Fabric a matsayin Buga Conveyor Belt: Fa'idodi 6 waɗanda ke da mahimmanci

A cikin ayyukan bugu - ko bugu na allo, inkjet na dijital, ko canja wurin zafi - bel mai ɗaukar hoto yana taka muhimmiyar rawa. Yana ɗaukar ma'aunin ta hanyar busassun tanda, raka'a masu warkarwa UV, ko matse zafi. Idan bel ɗin ya manne da tawada, ya lalace a ƙarƙashin zafi, ko ya ba da damar kai harin sinadarai, ingancin bugawa yana wahala kuma yana ƙaruwa.

PTFE high-zazzabi masana'anta (PTFE-rufi fiberglass ko aramid) warware wadannan matsaloli. Yana haɗuwa da sakin da ba sanda ba, babban juriya na zafi, kwanciyar hankali mai girma, da rashin kuzarin sinadarai a cikin abu ɗaya.

Aokai PTFE ya ba da bel na bugu tsawon shekaru da yawa. A ƙasa akwai manyan fa'idodi guda shida waɗanda ke sanya masana'anta PTFE zaɓin da aka fi so don firinta a duk duniya.

Ayyukan Mara Sanda - Babu Sauran Rago Tawada

Wannan ita ce fa'idar da aka fi gani nan da nan. Buga manna, tawada UV, da adhesives ba sa manne da saman PTFE.

1. Abin da ake nufi da layin buga ku

• Belin yana kasancewa mai tsabta a duk lokacin gudu. Babu buƙatar tsayawa da goge busasshen tawada.

• Abubuwan da aka bugu suna fitowa da tsafta - babu shafa, babu fatalwa, babu canja wurin tawada zuwa ga ma'auni.

• Tsaftacewa tsakanin ayyuka yana da sauri - gogewa mai sauƙi ko fesa kurkura, ba zaman gogewa mai ƙarfi ba.

2. Tasirin duniya na gaske

A cikin bugu na allo, tawada plastisol da manna na tushen ruwa na iya barin ragi mai ɗaki akan bel na al'ada. Tare da masana'anta na PTFE, bel ɗin ya kasance mai tsaftataccen motsi bayan motsi. A cikin bugu na dijital, tawada masu iya warkewa na UV waɗanda ba za su wuce gona da iri ba da gangan ba su haɗi zuwa bel.

Juriya mai zafi - Tsayayyen a yanayin bushewa

Layukan bugawa sau da yawa sun haɗa da ramukan bushewa (50-150 ° C don tawada na tushen ruwa), fitilu masu warkarwa na UV, ko matsar zafi don buga bugu (har zuwa 200-230 ° C). PTFE masana'anta yana sarrafa waɗannan yanayin zafi cikin sauƙi.

1. Mahimman bayanai

• Ci gaba da aiki zazzabi: -70°C zuwa 260°C

• Matsakaicin gajeren lokaci: 300 ° C ko mafi girma

• Babu lalacewar yanayin zafi a cikin wannan kewayon - bel ɗin baya yin laushi, shimfiɗawa, ko fitar da wari

2. Amfanin makamashi

Domin masana'anta na PTFE baya ɗaukar zafi kamar roba ko bel na ƙarfe, baya ɓata kuzarin dumama bel ɗin kanta. Ƙarin zafi yana shiga cikin bushewar da aka buga, rage farashin makamashi da haɓaka kayan aiki.

Aokai PTFE bayanin kula: Don buguwar canja wuri mai zafi (sublimation), masana'antar mu ta PTFE tana tsayayya da yanayin zafi na 200-230 ° C yayin samar da sakin mara tushe. Babu canja wurin tawada zuwa bel.

Ƙarfafa Girma - Madaidaicin Rijistar Buga

Rijistar bugawa ya dogara da bel ɗin baya mikewa, raguwa, ko sa ido a waje. PTFE masana'anta ya yi fice a nan.

1. Low elongation karkashin tashin hankali

• Ƙimar haɓaka <0.5% a ƙarƙashin tashin hankali na aiki na yau da kullun

• Ko da a yanayin zafi mai girma (200°C+), canjin yanayi ba shi da yawa

• Wannan yana tabbatar da cewa ayyukan bugu masu launuka iri-iri sun kasance cikin rajista a duk lokacin gudu

2. Daidaitaccen kula da tashin hankali

Ƙananan shimfiɗa yana nufin saitunan tashin hankali sun kasance barga. Belin baya sawa ko ɗaurewa ba tare da annabta ba, wanda zai haifar da rashin daidaituwa ko ƙumburi na gefe.

3. Yana hana al'amuran bin bel

Don firintocin fa'ida (mita 2-3), bin diddigin bel yana da mahimmanci. masana'anta na PTFE, wanda aka keɓe da kyau, yana gudana kai tsaye ba tare da yawo ba - yana rage lalacewa da sa hannun ma'aikaci.

Rashin Ƙarfafa Sinadari - Yana Hana Maƙallan Buga Masu Lalata

Manna bugu na allo, kaushi, da abubuwan tsaftacewa na iya zama m. Tawada na tushen PVC ya ƙunshi na'urorin filastik. Tawada na tushen ruwa sun ƙunshi amines. Tawada UV sun ƙunshi monomers. Duk suna iya kai hari na yau da kullun na kayan bel na jigilar kaya.

1. PTFE yana tsayayya da kusan komai

• Acids mai ƙarfi (sulfuric, nitric, hydrochloric)

• alkalis mai ƙarfi (sodium hydroxide)

• Abubuwan kaushi na halitta (giya, ketones, toluene)

• Buga manna, plastisols, da tawada masu warkewa UV

Wurin bel ɗin ya kasance cikakke ko da bayan watanni ko shekaru na fallasa ga sinadarai masu lalata. Babu kumburi, babu fasa, babu delamination.

Ƙarin Abubuwan Abubuwan Aiki - Ƙarƙashin Ƙarfafawa, Numfashi, da Ƙari

PTFE masana'anta yana kawo wasu fa'idodi da yawa waɗanda ke haɓaka aikin layin bugu.

1. Ƙananan juzu'i

Belin yana zamewa a hankali a kan faranti na jagora da abin nadi. Wannan yana rage nauyin motar tuƙi kuma yana hana jan ƙasa. Don masu isar da injin, ƙaramin juzu'i yana ba da damar bel ɗin don motsawa yayin da madaidaicin ke tsayawa.

2. Ingantacciyar iska mai ƙarfi (bel ɗin raga)

Buɗaɗɗen raga na PTFE yana ba da damar iska mai zafi ta gudana ta cikin bel, tana bushewa da kayan bugawa daga bangarorin biyu. Wannan yana haɓaka haɓakar bushewa sosai kuma yana rage farashin makamashi idan aka kwatanta da bel mai ƙarfi.

3. Flex gajiya juriya

Fiberglass mai rufaffiyar PTFE yana jure maimaita lankwasawa akan ƙananan rollers (har zuwa radius 25-30mm). Wannan yana ba da damar ƙirar injin ƙira ba tare da fashe bel ba.

4. Anti-static zaɓi

Don firintocin da ke sarrafa abubuwan da ba a iya gani ba (fim ɗin bakin ciki, takarda a cikin busassun muhalli), ana samun masana'anta na PTFE. Juriyar saman 10⁶-10⁹ Ω yana watsar da caji kafin ya haifar da walƙiya ko mannewa abu.

5. Amintaccen ingancin abinci

PTFE masana'anta ba mai guba bane kuma mai yarda da FDA. Don buga marufin abinci (misali, jakunkuna masu sassauƙa), bel ɗin yana da hadari don tuntuɓar kayan abinci na kwatsam.

Faɗin dacewa - Ana iya daidaita shi don kowane Tsarin Buga

PTFE masana'anta ba abu ne mai girman-daidai-duk ba. Aokai PTFE yana ba da kewayon zaɓuɓɓuka don dacewa da takamaiman aikace-aikacen bugu.

1. Abubuwan da za a iya daidaitawa

2. Me ya sa wannan ya shafi

Hanyoyin bugawa daban-daban suna da buƙatu daban-daban:

• Buga allo (rubutu): bel mai kauri (0.25-0.30mm) don dorewa, buɗaɗɗen raga don kwararar iska ta cikin na'urar bushewa.

• Canja wurin zafi (sublimation): bel na bakin ciki (0.13-0.18mm) don canja wurin zafi mai sauri, ƙasa mai ƙarfi.

• UV dijital bugu: Anti-static bel don hana takarda manne.

• Buga marufi na abinci: darajar FDA-mai yarda, saman mai sauƙin tsaftacewa.

Aokai PTFE na iya injiniyan ainihin bel don ƙirar firinta da ƙirar ku.

Takaitawa - Me yasa PTFE Fabric Shine Madaidaicin bel ɗin jigilar bugu

Aokai PTFE yana kera bel ɗin bugu wanda ya wuce roba, silicone, da bel ɗin masana'anta na yau da kullun da shekaru. Don layin bugu wanda ke tafiyar da tsafta, yin rijista da ƙarfi, kuma yana buƙatar ƙarancin kulawa, masana'anta na PTFE shine haɓakawa.

Tuntuɓe mu tare da ƙayyadaddun firinta (nisa, diamita na abin nadi, kewayon zafin jiki, da nau'in tawada) don shawarar bel.

Abubuwan da ke sama sun samar da su Jiangsu Aokai New Materials Technology Co., Ltd.

Idan kuna son ƙarin koyo dalla-dalla, yanayin aikace-aikacen da mafita na musamman don cikakkun samfuran samfuranmu, gami da yadudduka masu zafin jiki na PTFE, kaset ɗin zafin jiki na PTFE, bel ɗin raga na PTFE, bel ɗin na'ura mai haɗawa, zane mai gefe guda PTFE, babban zafin jiki mai juriya mai isar da bel da bel ɗin fiberglas mai ƙarfi da ke ƙasa da hanyoyin fiberglas ɗin mu.

• Mr. Guo: +86 18944819998

• Malam Liu: +86 13705266308

Kullum muna bin falsafar sabis na ƙwararru da mutunci, kuma da zuciya ɗaya muna ba ku mafita ta tsayawa ɗaya da sabis na tunani!