PTFE High-Temperature Fabric in Garment Interlining – Aplikeshɔn ɛn Bɛnifit dɛn

We dɛn de mek klos, dɛn kin bon intalayn (fusible intalayn) to klos bay we dɛn de yuz ɔt mɛlt adeziv we di tɛmpracha ɛn prɛshɔn ay. We dɛn de du dis, adhesive we dɔn rɔtin kin stik to di ikwipmɛnt, dɔti di batch dɛn we go kam, ɛn mek tin dɛn we nɔ fayn. PTFE ay-tɛmpracha fabrik de sɔlv dɛn prɔblɛm ya.

Frɔm kɔntinyu fɔ fiuz mashin to flat ɔt prɛs, frɔm intalayn kɔtin layn to sampul rum ayɛn, PTFE fabrik na sɔntin we dɛn nɔ go ebul fɔ chenj. I 260°C ɔt rɛsistɛns, nɔ-stik sɔfays, ɛn dimɛnshɔnal stebiliti mek am di standad chuk.

Aokai PTFE dɔn de saplae PTFE fabrik to di garment intalayn industri fɔ lɔng lɔng tɛm. Dis gayd de tɔk bɔt tri say dɛn fɔ yuz am: fɔ prɛs wit ɔt na di faktri dɛn we de mek klos, fɔ mek intalayn, ɛn fɔ pik di tin dɛn we dɛn fɔ yuz.

Aplikeshɔn dɛn na Garmɛnt Faktɔri Hɛt Prɛsin – Di Mɔs Ɛkstensiv Yuz

Dis na di mɔs bɔku aplikeshɔn sɛnɛriɔ fɔ PTFE ay-tɛmpracha fabrik, we de disayd dairekt wan fɔ di klos kwaliti we dɔn dɔn ɛn di prodakshɔn efyushɔn.

1. Seamless endless conveyor belts fɔ kɔntinyu fɔ fuz mashin dɛn

As di kor komponɛnt fɔ rɔla intalayn prɛs, simlɛs ɛndlɛs bɛlt dɛn we dɛn mek wit PTFE fabrik kɔmplit wan de ripel mɔlt ɔt mɛlt adhesive. Dɛn kin mek dɛn ebul fɔ kɛr di fes klos ɛn intalayn dɛn smol smol ɛn nɔ gɛt wrinkle ɛn nɔ de kɔmɔt biɛn dɛn, ɛn dɛn kin liv lɔng pas di tradishɔnal pepa bɛlt dɛn.

Wetin mek i nɔ gɛt wan sik: Bɛlt we dɛn sim kin mek wan bɔmp na di say we dɛn de prɛs, ɛn lɛf mak we pɔsin kin si na di klos. Bɛlt dɛn we nɔ gɛt ɛnd we nɔ gɛt wan bɔt de pul dis prɔblɛm.

2. Nɔn-stik padding ɛn kɔba klos fɔ flat ɔt prɛs

3. Nɔn-stik ayɛn shuz kɔva ɛn sampul ɔt prɛs

Fɔ sampul rum ɛn smɔl-batch intalayn tɔch-ap, dɛn kin fit di industrial ayɛn dɛn wit ayɛn shuz kɔva dɛn we dɛn mek wit PTFE ay-tɛmpracha klos, ɔ dɛn kin put wan tin layt PTFE klos ɔnda we dɛn de pres. Dis de mek di ɔvaflɔ adhesive patikyula dɛn nɔ de kabɔnayz ɛn fɔm stɛp-bɔn blak skel pan ayɛn bays.

Aplikeshɔn dɛn na Intalayn Fabrik Manufakchurin

PTFE ay-tɛmpracha fabrik na impɔtant fɛnshɔnal kɔmpɔnɛnt pan kɔtin prodakshɔn layn dɛn na intalayn manifakta dɛn.

1. Dray ɛn sintering kɔnvayɔr bɛlt fɔ dɔt paste / paoda dɔt kɔtin mashin dɛn

Afta dɛn dɔn kɔt di paste dɔt ɔ paoda dɔt, di intalayn dɛn kin pas tru ɔvin dɛn we gɛt ay tɛmpracha fɔ mek i mɛlt, fɔm, ɛn sɛt di layt we de adhesive. Kɔnvaysɔ bɛlt dɛn we de kɛr wet ɔ sɛmi-mɔlt adhesive surface dɛn fɔ adopt PTFE fabrik. I de stɔp strɔng adeziv fɔ stik to mashin dɛn we i de kip intakt, rawnd adeziv dɔt dɛn ɛn flat bays klos.

Wetin mek i impɔtant: If adeziv stik to di bɛlt, di dɔt patɛn go pwɛl, ɛn di intalayn nɔ go ebul fɔ bond.

2. Isoleshɔn ɛn fikseshɔn insay dɛbul-dɔt kɔtin prɔses

We dɛn de prodyuz prɛmiɔm dabl-dɔt intalayn, PTFE ay-tɛmpracha fabrik de akt lɛk aysolɛshɔn kɔnvaysɔ bɛlt ɔ prɛs rɔla wrap fɔ avɔyd krɔs-kɔntaminɛshɔn bitwin difrɛn kɔtin layers ɛn adheshon fɔ adhesive pɛlɛt dɛn we nɔ kol we dɛn de waynd – we de protɛkt di intagriti fɔ di dɔt shep dɛn.

3. Anti-stik ayzolayshɔn ɛn ripa fɔ intalayn dɛn we dɔn dɔn

• Hevi-duti ɔt prɛsin aysolɛshɔn layt: Fɔ ayli riaktiv ɔt mɛlt adhesives, dɛn kin rol wan laytwɛt PTFE fabrik togɛda wit finish intalayn dɛn as ayzolayshɔn layna fɔ mek layt-to-layer nɔ adhesive. Dis layna kin risaykul fɔ yuz am bɔku tɛm.

• Difekt ripa fɔ substandad prodak: Dɛn kin du pat pan paoda rifil ɛn ripa fɔ di adhesive dɔt dɛn we nɔ de pan flat prɛs ɔnda di protɛkshɔn fɔ PTFE fabrik, we nɔ go pwɛl di bays klos.

Material Selection – Tik, Finish, ɛn Spɛshal Ficha dɛn

Dɛn kin pik difrɛn gred dɛn fɔ PTFE ay-tɛmpracha fabrik akɔdin to di aktual wok kɔndishɔn dɛn.

1. Tik ɛn wet

2. Fɔ dɔn di surface

• Glossy finish na in dɛn kin lɛk insay bɔku kes dɛn fɔ di bɛst nɔ-stik pefɔmɛns.

• Dɛn kin pik mat ɔ grid tɛkstɔr fabrik we dɛn nid fɔ frikshɔn smɔl fɔ mek di klos nɔ slip.

3. Anti-statik tritmɛnt

Statik ilɛktrishɔn kin izi fɔ mek we dɛn de prɛs kemikal fayv klos dɛn. Sɔm PTFE fabrik dɛn kin du anti-statik modifyeshɔn fɔ avɔyd dɔst absɔpshɔn ɛn ilɛktrɔstatik dischaj risk.

4. Ɛndlɛs bɛlt jɔyn teknɔlɔji

Fɔ mek dɛn prodyuz bɛlt dɛn we nɔ gɛt ɛnd we nɔ gɛt ɛnd, dɛn kin yuz bias lap jɔyn ɔ dabl-sayd PTFE adhesive tape bonding, we kin mek shɔ se dɛn wok fayn fayn wan we dɛn nɔ de jomp di bɛlt.

Aokai PTFE de gi kɔstɔm wit, tik, ɛn sɔfayz finish fɔ garmɛnt intalayn aplikeshɔn dɛn. Fɔ ay-volyum fiuzin mashin dɛn, wi kin rikɔmɛnd 0.45mm simlɛs ɛndlɛs bɛlt dɛn wit glos finish.

Sɔma – PTFE Fabrik Valyu insay Garmɛnt Intalayn

Aokai PTFE de saplae PTFE fabrik spɛshal fɔ garmɛnt intalayn aplikeshɔn dɛn. Ilɛksɛf yu nid bɛlt dɛn we nɔ gɛt ɛnd fɔ fiuz mashin dɛn, kɔva klos fɔ flat prɛs, ɔ kɔnvayɔri bɛlt fɔ kɔt layn dɛn, wi kin mach di rayt tik, finish, ɛn wit. Kontakt wi wit yu ikwipmɛnt spɛsifikɛshɔn ɛn prodakshɔn volyum.

Dis teknikol brif na Jiangsu Aokai Nyu Matirial Teknɔlɔji Kɔmni, Ltd.

If yu want fɔ lan ditayl spɛsifikɛshɔn, aplikeshɔn sɛnɛriɔ ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful prodak layn ap, inklud PTFE ay-tɛmpracha fabrik, PTFE ay-tɛmpracha adeziv tep, PTFE mɛsh kɔnvayɔri bɛlt, simlɛs fiuzin mashin bɛlt, singl-sayd PTFE kɔt klos, ɔt-rɛsistant kɔnvayɔr bɛlt ɛn ay-tɛmpracha fayv glas fabrics, duya kɔntakt wi tru di chanɛl dɛn we de dɔŋ ya:

• Mista Guo: +86 18944819998 kin yuz am

• Mista Liu: +86 13705266308 yuz am

Wi de fala di savis filɔsofi fɔ profeshɔnal ɛn intɛgriti, we de dediket fɔ gi yu wan-stɔp intagreted sɔlvishɔn ɛn atɛnshɔn kastoma savis!