Os » Nyuz » PTFE Adhesive Tep we yu kin yuz » PTFE Tep fɔ Anti-Kɔrɔshɔn, Nɔn-Stik, ɛn Silin Protɛkshɔn fɔ Kɛmikal Paip ɛn Vesɛl dɛn

PTFE Tep fɔ Anti-Kɔrɔshɔn, Nɔn-Stik, ɛn Silin Protɛkshɔn fɔ Kɛmikal Paip ɛn Vesɛl dɛn

Views: 0 Author: Sayt Ɛditɔ Pɔblish Taym: 2026-07-03 Ɔrijin: Ples

Aks kwɛstyɔn

Tebul fɔ Tin dɛn we De Insay

Insay kemikal plant, paip ɛn vessel dɛn kin gɛt atak ɔltɛm frɔm agresiv midia – strɔng asid, ɔt alkali, ɔrganik sɔlvɛnt, ɛn stim. PTFE tep na kɔmɔn sɔlvishɔn fɔ anti-kɔrɛshɔn, nɔ-stik, ɛn siling protɛkshɔn. Bɔt fɔ pik di rayt tep nɔ simpul lɛk fɔ pik di tɛmpracha we ay pas ɔl.

Aokai PTFE dɔn de saplae PTFE tep fɔ kemikal aplikeshɔn fɔ bɔku bɔku ia. Dis gayd de ɛksplen di tri-layer strɔkchɔ fɔ PTFE tep, di kɔr sɛlɛkshɔn krayteria (tɛmpracha, kemikal midia, mɛkanikal rikwaymɛnt), ɛn di impɔtant kɔnstrɔkshɔn gaydlayn dɛn.

PTFE tep we dɛn rap pan kemikal paip ɛn vessel flanges.png

Di Tri-Layer Strukchɔ fɔ PTFE Ay-Tɛmpratura Tep

Di ɔvala pefɔmɛns fɔ kɔmɛshɔnal PTFE tep na tri strɔkchɔral layers de ditarmin am:

Structural Layer we gɛt fɔ du wit di tin dɛn we de apin	Di Tin dɛn we Dɛn Kɔmɔn	Impekt pan di Prodakt Sɛlɛkshɔn
Surface funkshɔnal layt	Pure PTFE film / PTFE-impregnated fayv glas fabrik	I de gayd nɔ-stik prɔpati, kemikal rɛsistɛns, ɛn maksimal tɛmpracha rɛsistɛns
Riinfɔsmɛnt sabstret	Nɔn (pure film) / Fayba glas klos / Aramid klos	Ditarmin mɛkanikal trɛnk, tɛnsiɛl rɛsistɛns, ɛn pankchɔ rɛsistɛns
Layer we gɛt adhesive	Silikɔn PSA, Akrilik PSA, Rɔba-bɛs PSA	Set di ɔpa tɛmpracha limit ɛn kemikal rɛsistɛns fɔ di wan ol tep; ɔltɛm na di wikest pefɔmɛns link

Kritikal insayt: Pan ɔl we PTFE insɛf kin wok stebul frɔm -190°C to 260°C fɔ lɔng tɛm, di adeziv na di pefɔmɛns bɔtulnɛk . Pik di adeziv bays pan di aktual savis envayrɔmɛnt, nɔto jɔs di PTFE sɔfays.

Kɔr Sɛlɛkshɔn Krayteria ɛn Maching Prinsipul dɛn

1. Opareshɔn tɛmpracha – adhesive sɛlɛkshɔn na di tɔp prayoritɛd

Tɛmpratura Rɛnj	Adhesive we dɛn kin advays	Wetin du
200°C – 260°C (fɔ lɔng tɛm)	Silikɔn PSA (we dɛn nid) .	di onli adhesive sistεm we de rεtεn stebul tackiness na dis rεnj; minimal residue afta dɛn dɔn pul am
120°C – 180°C wit supiriɔr sɔlvɛnt & ɔyl rɛsistɛns	Akrilik PSA we gɛt ay tɛmpracha	Strɔng bonding pas silikon, bɔt i de fel kwik kwik wan na 260°C
I de dɔŋ 100°C	Kɔnvɛnshɔnal akrilik ɔ rɔba-based	Akseptabl, bɔt nɔ kin apin so ɔltɛm na kemikal ɛnvayrɔmɛnt

Aokai PTFE not: Fɔ aplikeshɔn na 200°C+, akrilik PSA nɔ akseptabl – i go pwɛl, sof, ɛn mek tep pul. Silikɔn na di wangren tin we pɔsin kin pik fɔ du.

2. Kεmikכl mεdia – kכmpatibiliti bitwin adhesive εn sabstεrayt

Di PTFE funkshɔnal layt ficha nia yunivasal kɔrɛshɔn rɛsistɛns (eksept mɔlt alkali mɛtal ɛn ay-tɛmpracha ay-prɛshɔn fluorine gas). Bɔt di kemikal midia kin go insay di tep ed dɛn ɛn i kin pwɛl di layt we de adhesive dairekt wan.

Kεmikכl Midia	Adhesive we dɛn kin advays	Kɛlɛkɛlɛ
Inɔrganik strɔng asid (HCl, H2SO4 ≤80%), strɔng alkali (NaOH), brin, wata vaypa	Silikɔn PSA	Eksɛlɛnt tolɛreshɔn; fכm stebul prכtektiv kladin
Ɔrganik sɔlvɛnt dɛn (kɛtɔn, ɛsta, bɛnzin, toluɛn), ɔyl, fiul, strɔng ɔksidayz asid (HNO3, kɔnsɛntret H2SO4), glasial asɛtik asid	Akrilik PSA (grɛd we nɔ de mek sɔlvɛnt) .	Silikɔn de swel insay ɔrganik sɔlvɛnt dɛn; akrilik na rεkomεnd, bכt vεrifik tεmprachכ rεytin (jεnarali ≤150°C)
High-temp steam + high-concentration acid/alkali (alternativ ɛksplɔshɔn) .	Modified silikon PSA + multi-layer winding	Harshest kondishכn – silikon kin haydrolayz; riinfors wit multi-layer winding

Fɔ tɛmpracha we pas 150°C wit ɔrganik sɔlvɛnt: Yuz mɛkanikal fiksin ɔ glu-fri ɔt-shrink pure PTFE tep/tubing.

Aplikeshɔn Sɛnariɔ ɛn Kɔrɛspɔndɛns Sabstret Sɛlɛkshɔn

Sɛnario fɔ Aplikeshɔn	Substrate we dɛn kin rɛkɔmɛnd	Rizin
Paip ɔta wɔl anti-kɔrɛshɔn & anti-stik kɔtin (prɛvɛnt splash matirial akyumyuleshɔn)	Fabrik we gɛt ay trɛnk we gɛt PTFE we dɛn kɔt wit fayv glas (brawn/blak)	Wear-resistant, we nɔ de rɔtin; tiknes na 0.13-0.25mm; fit fɔ ripit waynd, fayn fayn kɔnfɔmabiliti
Vessel inner wall & flange surface anti-stik layna	Transparent pure PTFE film	Ultra-smooth non-stick surface, nɔ gɛt fayv wik risk; i fayn fɔ flat ɛn big kɔba say dɛn
Miksin shaft & rola wrapping	PTFE fayba glas fabrik wit ay-tak silikon adhesive	Sɔpɔt tɛnsiɔn wayndin; fayv glas sabstret de delivεr ay tεnsil strכng, avכyd difכmeshכn di tεm we i de rכt
Thread siling ɛn gasket riplesmɛnt	Machined pure PTFE film tep	Yuz PTFE kol flɔ prɔpati fɔ ful-ɔp gap dɛn; dɛn nid fɔ tek tep we nɔ gɛt fayv glas
Manholes & sight glasses fɔ strɔng asid stɔrɔj tank dɛn	Pure PTFE film / fayv glas fabrik wit kemikal-rɛsistant akrilik adhesive	Pure film de ayzolayt kɔrosiv midia; fayv glas klos kin mek i taf; lap joyn dεm nid fכ mכlti-layεr rεinfכsmεnt

Aplikeshɔn-spɛsifi k PTFE tep sɛlɛkshɔn.png

Kritikal Kɔnstrɔkshɔn ɛn Sefty Gaydlain

1. Surface pretreatment – di fawndeshכn fכ bכnd

Dɛn nid fɔ pul di rɔst kɔmplit wan, pul di rɔst, ɛn drɛy am. Waip di say dɛn wit asɛtɔn ɔ alkol dɔn yu kin bek kwik kwik wan wit flaym fɔ mek yu gɛt mɔ bondin trɛnk. Dis de pul di kontaminant dεm εn aktibכt di mεtal sεf fכ maksimal adheshon.

2. Ovalap ɛn waynd layers

wan minimכm 2-3 wayndin layεr dεm nid fכ kεmikכl protεkshכn wit 50% כvalap pan wan sεkכl. Tep ɛnd dɛn fɔ riinfɔs wit maching PTFE tep ɔ stenlɛs stiɛl kebul tay fɔ mek dɛn nɔ ful-ɔp di tep afta di adhesive penetration bay midia.

3. Sefty threshold – we fɔ avɔyd PTFE tep ɔltogɛda

Fɔ di fɔs ekstrim midia, ɔl di tep dɛn we gɛt ɔrganik adeziv nɔ sef :

Haydrojen flɔrayd (HF) .
Boiling ay-konsentrashɔn strɔng alkali (>80%) .
Klɔrin trifluɔrayd (ClF3) .

Ɔda we fɔ du am: Swich to ful PTFE layn ɔ wɛld fiks kladin (nɔ gɛt adeziv).

4. Anti-statik ɛn ɛksplɔshɔn-pruf mɛsej dɛn

If di paip layn de gi tin dɛn we kin bɔn ɛn statik akyumyuleshɔn kin apin, pik anti-statik PTFE tep (ɔltɛm dak blak wit kabɔn fil, sɔfays rɛsistiviti 106-109 Ω) fɔ dispɛt statik chaj sef wan.

Sɔmari – PTFE Tep Sɛlɛkshɔn Kwik Gayd fɔ Kwɛmyuɛl Aplikeshɔn dɛn

If yu envayrɔmɛnt na...	Pik...	Avɔyd...
200-260°C, asid/alkali/stim	Silikɔn PSA + fayv glas sabstret	Akrilik PSA (go degrad) .
120-150°C, ɔrganik sɔlvɛnt dɛn	Akrilik PSA (we nɔ gɛt sɔlvɛnt) .	Silikɔn PSA (swɛl insay sɔlvɛnt dɛn) .
>150°C, ɔrganik sɔlvɛnt dɛn	Pure PTFE film + mekanik fɔ fiks	Eni tep we de adhesive
HF, we de bɔyl >80% alkali, ClF3	PTFE-onli layn (no adhesive) .	Eni tep wit ɔrganik adeziv
Matirial dɛn we kin bɔn, statik risk	Anti-statik (kabon-ful) PTFE tep	Non-kɔnduktiv standad tep
Thread siling, gap filin	Skived pure PTFE film tep	Tep we dɛn mek wit fayv glas

Aokai PTFE de gi ful rεnj כf PTFE tep fכ kεmikכl aplikεshכn – silikon PSA fכ ay-temp asid/alkali savis, akrilik PSA fכ sכlvεnt rεsistεns, εn anti-statik gred. Kɔntakt wi wit yu kemikal midia, tɛmpracha rɛnj, ɛn mɛkanikal rikwaymɛnt fɔ wan tayla sɛlɛkshɔn.

Di teknikal kɔntinyu we de ɔp na... Jiangsu Aokai Nyu Matirial Teknɔlɔji Kɔmni, Ltd.

If yu nid ditayl spɛsifikɛshɔn, aplikeshɔn kes ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful prodak rɛnj inklud PTFE ay-tɛmpracha klos, PTFE ay-tɛmpracha adeziv tep, PTFE ay-tɛmpracha mɛsh bɛlt, simlɛs ɔt prɛs bɛlt, singl-sayd PTFE fabrik, ay-tɛmpracha rɛsistant kɔnvayɔr bɛlt ɛn ɔt-rɛsistant fayvglas klos, duya kɔntakt wi via di chanɛl dɛn we de dɔŋ ya:

Mista Guo: +86 18944819998 kin yuz am
Mista Liu: +86 13705266308 yuz am

Wi de fala ɔltɛm to pɔshɔnal ɛn intɛgriti-oriɛnted savis filɔsofi, wit ɔl wi at fɔ gi wan-stɔp industrial sɔlvishɔn ɛn tink gud wan kastoma savis fɔ ɔl patna dɛn!