Wetin Mek Yuz PTFE Ay-Tɛmpratura Fabrik as Anti-Kɔrɔshɔn Layning? 4 Di men bɛnifit dɛn we wi kin gɛt

Insay kemikal plant dɛn, rifinɛri dɛn, ɛn say dɛn fɔ trit dɔti wata, di layn dɛn we dɛn kin yuz fɔ mek di ikwipmɛnt dɛn kin gɛt wan bad bad say: strɔng asid, ɔt alkali, ɔrganik sɔlvɛnt, ɛn tɛmpracha we pasmak. Rɔba layn dɛn kin swel ɛn krak. FRP layn dɛn blista. Stainlɛs stiɛl kin rɔtin.

PTFE ay-tɛmpracha fabrik (PTFE-coated fiberglass) pas dɛn tradishɔnal matirial ya. I kεmikכl inεt, hεt-rεsistεnt, dimεnshכnal stebul, εn nכ stik – כl in wan.

Aokai PTFE dɔn saplae PTFE fabrik fɔ anti-kɔrɛshɔn layn aplikeshɔn fɔ dikɛd ia. Dis dɔŋ ya na 4 men bɛnifit dɛn, ɛn rial-wɔl aplikeshɔn ɛgzampul dɛn.

Kεmikכl Inεtnεs – I De Rεsist Kכlכsכl כltin

di kכr advantej fכ PTFE na in nia-yunivεsal kεmikכl rεsistεns. Bɔku tɛm dɛn kin kɔl am 'King of Plastics' fɔ gud rizin.

1. Wetin i de agens

• Strɔng asid: Sɔlfɔrik, naytrik, haydroklɔrik, fosfɔrik, ɛn ivin akwa regia (na miks naytrik ɛn haydroklɔrik asid we de sɔlv gold) .

• Strɔng alkali: Sɔdiɔm haydroksayd, potashɔm haydroksayd, amonia

• Ɔrganik sɔlvɛnt dɛn: Alkol, kitɔn, aromat haydrokabɔn (toluɛn, xylene), sɔlvɛnt we gɛt klorin

• Ɔda tin dɛn we kin mek pɔsin rɔtin: Ɔksidayz, sɔl, ɛn bɔku pan di kemikal dɛn we de na di industri

2. Wetin i nɔ de agens (limitations) .

• Alkali mεtal dεm we mכlt (sכdiכm, potashכm) – go pwεl PTFE

• Fluorine gas ɛn strɔng fluorinating ejen dɛn na ay tɛmpracha

• haydrofluorik asid (HF) – de atak di fayv glas sabstεrayt if di kכt gεt pinhol dεm

Praktikal not: Fɔ haydrofluoric asid savis, yuz spɛshal HF-rɛsistant gred ɔ mek shɔ se di PTFE kɔtin nɔ gɛt pinhol ɔltogɛda (bɔku kɔtin pas). Aokai PTFE de gi yu dɛn kayn gred dɛn de.

Waid Tɛmpratura Rɛnj – Frɔm Friz to Ɛkstrim Ɔt

Bɔku tɛm, di layn dɛn we de agens kɔrɛshɔn nɔ jɔs de fes kemikal, bɔt di tɛmpracha we pasmak. PTFE fabrik de handle ɔl tu di ɛnd dɛn na di spɛktrum.

1. Ay-tɛmpracha pefɔmɛns

• Kontinyu ɔpreshɔn tɛmpracha: -70°C to 260°C

• Short-tɛm pik: 350°C (smɔl ɛkskurshɔn dɛn)

• tεst fכ tεm we i de ol wit tεm: afta 200 dez kכntinyu na 250°C, mεkanikal trεnk de sho se i nכ de dכn klia wan

2. Lɔw-tɛmpracha pefɔmɛns

• I de stil fleksibul dɔŋ to -70°C

• I kin tinap fɔ -180°C (likwid naytrɔjen tɛmpracha) we i nɔ krak – pan ɔl we di fleksibiliti kin ridyus

3. Wetin mek dis impɔtant fɔ layn aplikeshɔn dɛn

Insay disulfurization ikwipmɛnt, flue gas kin rich 200-250°C. Rɔba layn dɛn kin pwɛl pas 120°C. PTFE fabrik de go bifo. insay krayojenik kεmikכl prכsεsin (-50°C), PTFE nכ de bi brit lεk plεnti plastic.

Fizik ɛn Mɛkanikal Prɔpati dɛn – Stebul, Strɔng, ɛn Nɔn-Stik

Biyond kemikal ɛn thermal resistance, PTFE fabrik de gi sɔm mɛkanikal bɛnifit dɛn we de mek am wan fayn fayn layn matirial.

1. Dimenshɔnal stebiliti (lɔ difɔmeshɔn) .

Di fayv glas sabstret de gi PTFE fabrik ay tɛnsiɛl trɛnk ɛn rili lɔw ɛlongeshɔn – tipikli <0.5% ɔnda lod. Dis min se:

• Di layn nɔ kin strɛch ɔ sag as tɛm de go

• Nɔ wrinkling ɔ buckling bikɔs ɔf thermal expansion

• Mentɛn tayt fit agens di ikwipmɛnt wɔl

2. Nɔn-stik sɔfays (i izi fɔ klin) .

PTFE in frikshɔn kɔfishin na lɛk 0.05-0.1 . Bɔku pan di tin dɛn nɔ kin ebul fɔ atak am. Fɔ anti-kɔrɛshɔn layn, dis min se:

• di rεsidεns frכm kεmikכl riakshכn dεm nכ de bil pan di layn

• Klin bitwin batch dɛn kin fast – bɔku tɛm na jɔs wata rins

• Nɔ 'baking on' fɔ dray kemikal dipɔsit

3. Ilɛktrik insuleshɔn

• Dielektrik konstant <2.6

• Ay volyum resistiviti (>10⊃1;5 Ω·cm)

• I fayn fɔ inshɔlat wrap dɛn na ilɛktronik ɛn ilɛktrik ikwipmɛnt usay dɛn nid bak fɔ protɛkt frɔm kɔrɛshɔn

4. Anti-aging ɛn flame retardant

• Outstanding weta resistans (UV stebul) .

• Nɔn-flammable – i kin ɔt insɛf (UL94 V-0 raytin tipik)

• Nɔ mɛzhɔbal dɛgradɛshɔn afta ia we dɛn dɔn de na do

Food-Gred Certification – Sef fɔ Fɔd ɛn Fama

Nɔto ɔl di anti-kɔrɛshɔn layn dɛn nid fɔ bi fud-grɛd. Bɔt we dɛn du am – insay it prɔsesin, famasitik, ɔ pɔtabl wata aplikeshɔn – PTFE fabrik de delivr.

1. Sɛtifiket dɛn

• FDA 21 CFR 177.1550 – fɔ dairekt ɛn indayrɛkt it kɔntakt

• EU Rɛgyuleshɔn 1935/2004 – fɔ it kɔntakt matirial dɛn

• Nɔn pɔyzin, nɔ gɛt ɔda tin fɔ smɛl ivin we di ples wam pasmak

• Nɔ lich tin dɛn we de ambɔg pɔsin insay it ɔ famasi

2. Usay dɛn de yuz layn fɔ it-grɛd

• Baking sheet ɛn oven liners na kɔmɛshɔnal bekeri (nɔ-stik, izi fɔ klin)

• Famasiutik prodakshɔn ikwipmɛnt – riakshɔn vessel ɛn drying trey

• Fɔd prɔsesin tank – usay it dɛn we gɛt asid ɔ ɔyl kin kɔntakt di layn

Tipik Aplikeshɔn Sɛnɛri fɔ Anti-Kɔrɔshɔn Layning

Bay di bɛnifit dɛn we wi dɔn tɔk bɔt, dɛn kin yuz PTFE ay-tɛmpracha fabrik bɔku bɔku wan pan dɛn tin ya:

1. Kwɛmyuɛl ɛn envayrɔmɛnt protɛkshɔn

• Petrokemikal paip layn – intanɛnt layn fɔ mek i nɔ rɔtin frɔm krud ɔyl, rifin prodak, ɛn sɔl gas

• Disulfurization ikwipmɛnt (pawa plant) – layn fɔ skrab, dakt wok, ɛn chimini usay flu gas gɛt SO1 ɛn HCl

• Riakshɔn vessel ɛn stɔrɔj ​​tank – layn fɔ tank dɛn we de ol kɔnsɛntret asid, alkali, ɔ agresiv sɔlvɛnt

• Piklin tank (stɛl prɔsesin) – layn fɔ tank dɛn we gɛt haydroklɔrik ɔ sɔlfɔrik asid fɔ klin mɛtal

Fil data frɔm Aokai PTFE: Insay wan pawa plant disulfurization tawa, PTFE fabrik layn bin las 3 ia we i nɔ bin pwɛl. Rɔba layn bin de las fɔ 9 mɔnt nɔmɔ bifo dis tɛm. Dat na 4x layf ɛkstenshɔn.

2. Fɔd ɛn famasi industri

• Baking sheet ɛn oven liners – nɔ stik, izi fɔ klin, FDA kɔmpliant

• Maykrowev gasket – we nɔ de ɔt ɛn we nɔ de stik

• Famasi prodakshɔn ikwipmɛnt – layn fɔ drɛy tre, miks vessel, ɛn tablɛt kɔtin pan

3. Mashin ɛn ilɛktronik tin dɛn

• High-temperature conveyor belts for photovoltaic laminators – kɔba anti-kɔrɛshɔn wit nɔ-stik ɛn ɔt rɛsistɛns

• Hɛt silin plet dɛn – PTFE fabrik as nɔ-stik kɔva

• Ilɛktrik insuleshɔn layna dɛn – usay dɛn nid ɔl tu insuleshɔn ɛn kɔrɛshɔn protɛkshɔn

Sɔmari – Wetin Mek Yu Pik PTFE Fabrik fɔ Anti-Kɔrɔshɔn Layn

Aokai PTFE de mek PTFE ay-tɛmpracha fabrik spɛshal fɔ anti-kɔrɛshɔn layn aplikeshɔn dɛn. Wi de gi kɔstɔm wit, tik (0.08mm to 0.40mm), ɛn gred dɛn we FDA sɛtifiket. Kɔntakt wi wit yu kemikal ɛnvayrɔmɛnt, tɛmpracha rɛnj, ɛn ikwipmɛnt dimɛnshɔn fɔ wan layn rɛkɛmɔndeshɔn.

Di tin dɛn we de ɔp na... Jiangsu Aokai Nyu Matirial Teknɔlɔji Kɔmni, Ltd.

If yu want fɔ lan mɔ bɔt ditayl spɛsifikɛshɔn, aplikeshɔn sɛnɛriɔ ɛn kɔstɔmayz sɔlvishɔn fɔ wi ful rɛnj ɔf prɔdak, inklud PTFE ay-tɛmpracha fabrik, PTFE ay-tɛmpracha tep, PTFE mɛsh bɛlt, simlɛs bɔnding mashin bɛlt, singl-sayd PTFE klos, ay-tɛmpracha rɛsistant kɔnvaysɔ bɛlt ɛn ay-tɛmpracha rɛsistant fayvglas fabrics, duya fil fri fɔ kɔntakt wi:

• Mista Guo: +86 18944819998 kin yuz am

• Mista Liu: +86 13705266308 yuz am

Wi de ɔltɛm sɔpɔt di filɔsofi fɔ profeshɔnal ɛn intɛgriti, ɛn wi de dediket fɔ gi yu wan-stɔp sɔlvishɔn ɛn savis we yu tink gud wan.