Me yasa Ayi Amfani da Fabric Babban Zazzabi na PTFE azaman Rufin Ƙarfafawa? 4 Mabuɗin Amfani

A cikin tsire-tsire masu sinadarai, matatun mai, da wuraren kula da ruwan sha, kayan aikin rufin suna fuskantar mummunan yanayi: acid mai ƙarfi, alkalis mai zafi, kaushi na halitta, da matsanancin zafin jiki. Rubutun roba suna kumbura suna fashe. FRP blister. Bakin karfe lalata.

PTFE high-zazzabi masana'anta (PTFE-rufin fiberglass) ya fi waɗannan kayan gargajiya. Yana da rashin ƙarfi ta hanyar sinadarai, mai jurewa zafi, tsayin daka, kuma mara tsayawa - duk a ɗaya.

Aokai PTFE ya samar da masana'anta na PTFE don aikace-aikacen rufin lalata shekaru da yawa. A ƙasa akwai fa'idodi huɗu masu mahimmanci, tare da misalan aikace-aikacen ainihin duniya.

Sinadarin Rashin Ƙarfafawa - Yana Hana Kusan Komai

Babban fa'idar PTFE shine juriyar sinadarai ta kusa. Sau da yawa ana kiransa 'Sarkin Filastik' saboda kyakkyawan dalili.

1. Abin da ya hana

• Acids mai ƙarfi: Sulfuric, nitric, hydrochloric, phosphoric, har ma da aqua regia (cakuda na nitric da hydrochloric acid waɗanda ke narkar da zinariya)

• alkalis mai ƙarfi: sodium hydroxide, potassium hydroxide, ammonia

• Abubuwan kaushi na halitta: Alcohols, ketones, hydrocarbons aromatic (toluene, xylene), chlorinated kaushi

• Sauran abubuwan lalata: Oxidizers, salts, da yawancin sinadarai na masana'antu

2. Abin da ba ya jurewa (iyaka).

• Narkakken alkali karafa (sodium, potassium) - zai lalata PTFE

• Gas na Fluorine da ma'auni mai ƙarfi mai ƙarfi a yanayin zafi

• Hydrofluoric acid (HF) - yana kai hari ga ma'aunin fiberglass idan murfin yana da ramuka

Bayanin aiki: Don sabis na hydrofluoric acid, yi amfani da ƙimar HF na musamman ko tabbatar da cewa rufin PTFE ba shi da ƙoshin fata gaba ɗaya (masu wucewa da yawa). Aokai PTFE yana ba da irin waɗannan maki.

Faɗin Yanayin Zazzabi - Daga Daskarewa zuwa Zafi Mai Girma

Rigunan rigakafin lalata galibi suna fuskantar ba kawai sinadarai ba, amma matsanancin zafin jiki. PTFE masana'anta suna rike da ƙarshen bakan.

1. High-zazzabi yi

• Ci gaba da aiki zazzabi: -70°C zuwa 260°C

• Kololuwar gajeren lokaci: 350°C (taƙaitaccen balaguron balaguro)

• Gwajin tsufa na thermal: Bayan kwanaki 200 na ci gaba a 250 ° C, ƙarfin injin ba ya nuna raguwa a fili.

2. Low-zazzabi yi

• Ya kasance mai sassauci zuwa -70 ° C

• Zai iya jurewa -180 ° C (zafin nitrogen mai ruwa) ba tare da fashe ba - kodayake sassauci yana raguwa.

3. Me yasa wannan ya shafi aikace-aikacen layi

A cikin kayan aikin desulfurization, iskar gas zai iya kaiwa 200-250 ° C. Rubutun roba suna raguwa sama da 120 ° C. PTFE masana'anta suna bunƙasa. A cikin sarrafa sinadarai na cryogenic (-50°C), PTFE baya zama gaggautsa kamar robobi da yawa.

Kayayyakin Jiki da Injini – Barga, Ƙarfi, da Mara Sanda

Bayan sinadarai da juriya na thermal, masana'anta na PTFE suna ba da fa'idodin injina da yawa waɗanda ke sanya shi kyakkyawan kayan rufi.

1. Kwanciyar hankali (ƙananan nakasawa)

Gilashin fiberglass yana ba da masana'anta na PTFE babban ƙarfin ƙarfi da ƙarancin ƙarfi sosai - yawanci <0.5% ƙarƙashin kaya. Nufin wannan:

• Rubutun baya mikewa ko yin kasala akan lokaci

• Babu wrinkling ko buckling saboda thermal faɗaɗa

• Yana kula da dacewa da bangon kayan aiki

2. Non-stick surface (saukin tsaftacewa)

Matsakaicin juzu'i na PTFE yayi ƙasa da 0.05-0.1 . Yawancin abubuwa ba za su iya mannewa saman sa ba. Don maganin lalata, wannan yana nufin:

• Rago daga halayen sinadarai ba ya taruwa akan rufin

• Tsaftacewa tsakanin batches yana da sauri - sau da yawa kawai wanke ruwa

• Babu busasshen ma'ajin sinadarai da ake toyawa

3. Wutar lantarki

• Dielectric akai-akai <2.6

• Babban juriya na girma (> 10⊃1; ⁵ Ω · cm)

• Ya dace da kunsa a cikin kayan lantarki da lantarki inda ake buƙatar kariya ta lalata kuma

4. Anti-tsufa da kashe wuta

• Babban juriya na yanayi (tsawon UV)

• Mara flammable - mai kashe kai (UL94 V-0 rating na hali)

• Ba a auna lalacewa bayan shekaru na bayyanar waje

Takaddun darajar Abinci - Amintacce ga Abinci da Magunguna

Ba duk rufin rigakafin lalata ba ne suke buƙatar zama matakin abinci. Amma idan sun yi - a cikin sarrafa abinci, magunguna, ko aikace-aikacen ruwan sha - masana'anta na PTFE suna bayarwa.

1. Takaddun shaida

• FDA 21 CFR 177.1550 don tuntuɓar abinci kai tsaye da kai tsaye

• Dokokin EU 1935/2004 - don kayan tuntuɓar abinci

• Mara guba, mara wari ko da a yanayin zafi mai yawa

• Babu leaching na abubuwa masu cutarwa cikin abinci ko magunguna

2. Inda ake amfani da lilin kayan abinci

• Ganyen yin burodi da tanda a cikin wuraren yin burodi na kasuwanci (marasa sanda, tsaftacewa mai sauƙi)

• Pharmaceutical samar kayan aiki - amsa tasoshin da bushewa trays

• Tankunan sarrafa abinci - inda abinci mai acidic ko mai ya hadu da rufin

Yanayin aikace-aikace na yau da kullun don Lining Anti-lalata

Dangane da fa'idodin da ke sama, ana amfani da masana'anta mai zafin jiki na PTFE a cikin fa'idodi masu zuwa:

1. Chemical da kare muhalli

• Bututun Petrochemical - rufin ciki don hana lalata daga ɗanyen mai, samfuran da aka tace, da gas mai tsami

• Kayan aikin lalata (matakin wutar lantarki) - rufi don gogewa, ductwork, da bututun hayaki inda iskar gas ya ƙunshi SOₓ da HCl

• Tasoshin amsawa da tankunan ajiya - rufin tankuna masu riƙe da acid mai ƙarfi, alkalis, ko kaushi mai ƙarfi

• Tankuna masu ɗaukar ƙarfe ( sarrafa ƙarfe) - rufi don tankuna masu ɗauke da hydrochloric ko sulfuric acid don tsabtace ƙarfe

Bayanan filin daga Aokai PTFE: A cikin hasumiya mai lalata wutar lantarki, rufin masana'anta na PTFE ya dade shekaru 3 ba tare da gazawa ba. Rubutun roba a baya yana ɗaukar watanni 9 kawai. Wannan shine tsawan rayuwa 4x.

2. Masana'antar abinci da magunguna

• Tayoyin yin burodi da tanda - maras sanda, mai sauƙi mai tsabta, mai yarda da FDA

• Microwave gaskets - zafi mai jurewa kuma maras sanda

• Pharmaceutical samar kayan aiki - linings for bushewa trays, hadawa tasoshin, da kwamfutar hannu kwanon rufi

3. Machinery da Electronics

• Belt ɗin mai ɗaukar zafi mai zafi don laminators na hotovoltaic - haɗa anti-lalata tare da rashin tsayawa da juriya mai zafi

• Heat sealing faranti – PTFE masana'anta a matsayin mara sanda cover

• Lantarki masu rufewa na lantarki - inda ake buƙatar kariya da kariya ta lalata

Takaitawa - Me yasa Zabi Fabric na PTFE don Rufin Lalacewa

Aokai PTFE yana kera masana'anta na PTFE mai zafin jiki musamman don aikace-aikacen rufin lalata. Muna ba da faɗin al'ada, kauri (0.08mm zuwa 0.40mm), da takaddun shaida na FDA. Tuntube mu tare da mahallin sinadarai, kewayon zafin jiki, da girman kayan aiki don shawarwarin sutura.

Abubuwan da ke sama sun samar da su Jiangsu Aokai New Materials Technology Co., Ltd.

Idan kuna son ƙarin koyo game da cikakkun bayanai dalla-dalla, yanayin aikace-aikacen da gyare-gyare na musamman don cikakkun samfuran samfuranmu, gami da masana'anta masu zafin jiki na PTFE, kaset ɗin zafin jiki na PTFE, bel ɗin raga na PTFE, bel ɗin na'ura mai haɗawa, PTFE mai gefe guda, Tufafin PTFE mai gefe, high-zazzabi resistant na'ura bel da high-gilashi lamba mu fiber resistant bel.

• Mr. Guo: +86 18944819998

• Malam Liu: +86 13705266308

Kullum muna riƙe falsafar ƙwararru da mutunci, kuma muna sadaukar da kai don samar muku da mafita ta tsayawa ɗaya da sabis na tunani.