The PTFE high-temperature tape produced by Jiangsu Aokai New Materials uses silicone pressure-sensitive adhesive, which can work stably at 250°C for a long time. The fundamental reasons lie in the following three points:1. The Main Chain Consists of Si–O Bonds with High Thermal Decomposition Tempera

Jiangsu Aokai New Materials – a source factory of PTFE high-temperature cloth – takes you through how high-performance PTFE conveyor belts have become key components in dehydration, drying and baking production lines in the food processing industry. Whether for fruit and vegetable dehydration, meat

As a professional manufacturer of PTFE coated fiberglass fabric, Jiangsu Aokai New Materials mainly adopts dip coating and knife coating for this continuous flat product. (Traditional spray coating is not suitable for mass production due to low efficiency and high material waste.) Based on its core

The PTFE tape produced by Jiangsu Aokai New Materials, a professional manufacturer of PTFE tape, uses silicone pressure-sensitive adhesive (silicone PSA). The adhesion of silicone PSA follows the three universal steps of PSA: wetting – adsorption – cohesion, but its mechanism is unique:1. Wetting an

Jiangsu Aokai New Materials, a source manufacturer of PTFE coated fiberglass fabric, takes you to learn about PTFE coated fiberglass fabric. It is a composite material made of fiberglass cloth as the base material coated with Polytetrafluoroethylene (PTFE), widely used in high-temperature resistant

Jiangsu Aokai New Materials, a professional source manufacturer of PTFE high-temperature cloth, shares important precautions for the use of PTFE high-temperature tape.I. Preparation Before Applying PTFE High-Temperature TapeIn more than 80% of cases where PTFE high-temperature tape loses adhesion, t

Jiangsu Aokai New Materials, a source manufacturer of PTFE high-temperature cloth, explains the hardening and embrittlement of PTFE high-temperature cloth after prolonged high-temperature service from three perspectives: polymer chain relaxation, cross-linking, and degradation. It should be noted th

Jiangsu Aokai New Materials, a source manufacturer of PTFE high-temperature cloth, will explain to you that in the sintering process of producing PTFE high-temperature cloth by impregnating glass fiber cloth with PTFE emulsion, the heating rate is a core parameter determining the quality of the fini

In the actual production process of PTFE high-temperature cloth by Jiangsu Aokai New Materials, environmental humidity is usually controlled within a specific range of 40%–60% RH, combined with temperature regulation. The evaporation rate is adjusted to be slightly lower than the capillary transport

As a professional manufacturer of PTFE high-temperature cloth, Jiangsu Aokai New Materials will explain why PTFE-coated glass fiber cloth exhibits reduced wear under heavy friction conditions. Its wear resistance mechanism is not caused by a single factor, but can be understood from the following as