Efεkt כf Difrεnt Glas Fayba Wiv Patεn pan di Pεnεtreshכn Dip εn Kכtin Pεrformεns כf PTFE Emulshכn

Karakta

Plɛn Wiv

Twill Weave we de mek yu go

Satin Wev we de mek pɔsin

Bildin

Warp ɛn weft yan dɛn de intalayz wan oba wan ɔnda, we gɛt di strɔkchɔ we stebul pas ɔl.

di wכp yan dεm de kכntinyu fכ span mכltipכl weft yan dεm, we de fכm dayagכnal rij dεm.

Warp yarn dεm de intalεs wan tεm afta dεn span mכltipכl weft yarn dεm, wit di fכs intalayz pכynt dεm.

Dip we pɔsin kin go insay

Shalɔ: Dens intalaysin pɔynt dɛn tayt wan tayt yan, we de mek smɔl bɔt bɔku bɔku pores wit ay rɛsistɛns to ɛmulshɔn flɔ; di pεnεtreshכn de apin mεntal wan pan di sכfa.

Midul: Fכ intalaysin pכynt dεm εn bεtε pore kכntinyu, we de rεsult in big pεnεtreshכn dip pas plein wev.

Dip: Lus strכkchכ wit big, intakכnekt por dεm bitwin di yarn dεm; emulshכn izi fכ go dip insay di fabrik fכ fכm wan 'anchoring' strכkchכ.

Coating Adhesion fɔ di tin dɛn we de apin

Rili ay: Mainly surface adhesion; pan ɔl we di say we di wata de go insay de shalɔ, di big say we de ɔp de gi strɔng fyzikal adheshon.

Higher: I de kɔba di surface adhesion wit pat pan intanɛnt ankɔring.

rεlatεvli hכy: Dip pεnεtreshכn de fכm 3D mεkanikal intalכk bitwin di kכt εn di yan dεm, we de bכku bכku wan impruv di pεl trεnk.

Oval Pɔfɔmɛnshɔn Afta Kɔt

Ay rigiditi: Smɔl sɔfays wit fayn fayn dimɛnshɔnal stebiliti. Di trɛnk we pɔsin kin kray kin dipen mɔ pan di yarn insɛf.

Balans fleksibiliti: I de kɔba trɛnk wit mɔdaret sɔftnɛs.

Gud fleksibiliti: Sɔft fabrik wit ay tiar trɛnk, bɔt rili po wɔp ɛn weft dimɛnshɔnal stebiliti.