PTFE fini min bɛ funteni caman na (fibreglasi min datugulen don ni PTFE ye) ye filɛrikɛlan ɲuman ye min bɛ kɛ ka ɲɛsin cogoya juguw ma: gazi bɔlenw buguri bɔli (siman, bɔgɔ jeni, kɔɔri bɔgɔlanw fo ka se 260°C ma), jilama sɔgɔlenw bɔli (asidiw, alkaliw, tuluw), dumuni/furakɛli sterili filɛriw, ani HEPA saniyaso filɛriw. Yɔrɔ min tɛ nɔrɔ, o bɛ buguri bali ka sɔgɔsɔgɔ, wa a bɛ a to saniya ka nɔgɔn. Membrane-laminés grades bɛ se ka ultra-low emissions sɔrɔ.

PTFE fini min bɛ funteni caman na, o bɛ kuran sɛnɛcogo ɲuman mara ka bɔ -180°C la ka se 260°C ma: a hakɛ bɛ se ka kɛ >1013 Ω·cm ye 200°C la, dielektriki sabatili bɛ sabati 2.0-2.1 na. Ni 260°C sanfɛ, PTFE bɛ nɔgɔya, ka toli ka tɛmɛ 327°C kan, ka insulasi bɔnɛ kudayi. Ni 0°C duguma, insulasi bɛ ɲɛ nka finimugu bɛ kɛ kari. Aw bɛ to 260°C kɔnɔ walasa ka baara kɛcogo dafalen sɔrɔ.

PTFE fini min bɛ funteni caman na (fibreglasi min datugulen don ni PTFE ye) ka ɲi dumunifɛnw tacogo la ka da a kan a bɛ se ka funteni 260°C, a ka nɛnɛ bɛ se ka wuli -70°C, a yɔrɔ min tɛ nɔrɔ, ani a bɛ FDA labatoli. Baarakɛcogo kolomaw: buruburuw (bisiki, buru, piza), dumuni tobilenw, bonbon nɛnɛ siraw, jirisunw, funteni datugulanw, ani wuluwuluw sirilanw. A bɛ dɔ bɔ tiɲɛni ni saniya waati la.

Surface finishing agents minnu bɛ kɛ fibreglasi fini na ka sɔrɔ ka PTFE datugu, olu nafa ka bon kosɛbɛ PTFE laban finiw baara la funteni caman na. Organosilane coupling agents bɛ molekiyɔmuw ka dancɛw dilan gilasi fibre inorganique ni PTFE organique cɛ, ka peel fanga bonya ka bɔ <2 N/cm na ka se 4-8+ N/cm ma. Furakɛli ɲuman fana bɛ funteni kunbɛnni (260°C+), dielektriki baarakɛcogo, ani kemikaliya kunbɛnni sabati. Fini min ma furakɛ, o bɛ na ni delamination, bubbling ani baarakɛ waati surun ye.

Fibreglasi fini ka warp ni weft density de bɛ PTFE fini baarakɛcogo dantigɛ. Ni density ka bon, o bɛ dɔ fara a sɔgɔli fanga kan ani a ɲɛda nɔgɔyali kan nka a bɛ dɔ bɔ ɲɛjibɔ fanga la (inverted U-curve), a bɛ se ka wuli ka bɔ a la, ani a bɛ dɔ bɔ finimugu doncogo la. Density optimal bɛ balansi don doncogo, ɲɛjibɔbaliya, ladamuni, ani surface finish. Density dɔgɔman bɛ bɛn dynamique bending ma; density ka bon ka ɲɛsin non-stick ni insulation ma.

Kalandriya – ka fini min datugulen don ni PTFE ye, o digidigi miirili wulilenw ni ɲɔgɔn cɛ minnu sumana 360-380°C la – o bɛ yɔrɔ cogoya caman Changer, a bɔli cogoyaw, a tɛ se ka don a kɔnɔ, ani a kɛcogo masinko. A bɛ dɔ bɔ gɛlɛya la ka bɔ Ra 0,5-1,0 μm na ka se <0,05 μm ma, ka pinɛw datugu, ka sɛgɛn kunbɛncogo ɲɛ, nka a bɛ dɔ bɔ ɲɛjibɔ fanga ni a sɛgɛsɛgɛli la. A nafa ka bon ka ɲɛsin release liners ni kuran insulation ma.

Fibreglasi finimugu cogoya – gansan, twill, walima satin – bɛ nɔba bila PTFE finimugu funteni hakɛ caman na. Satin weave bɛ ɲɛjibɔ fanga caman di (2-3x plain) ani flexibilité, min ka ɲi kosɛbɛ dynamique bending. Weave gansan bɛ dimensions sabatili ɲuman di ani peel adhesion, min bɛnnen don baarakɛcogo jɔlenw ma. Twill bɛ balansi don nafolo bɛɛ la walasa ka baara kɛ ni a ye cogo bɛɛ la.

PTFE fini min bɛ funteni caman na, o dacogo kelen bɛ dɔn ni fɛn naani ye: finimugu dilanni (a fɛnɲɛnamafagalan hakɛ 0,15-0,35 μm, a sɔgɔli, a kɔnɔfɛn gɛlɛn), a dacogo & a sɔgɔcogo (a dacogo ka fisa ni nɛgɛ ye walasa a ka kɛ kelen ye), a jukɔrɔla cogoya (sɔgɔcogo, a furakɛcogo ka kɔn a furakɛcogo ɲɛ), ani a dilanni sigida (20-25°C, <60% RH). Dip + blade faralen ɲɔgɔn kan taabolo bɛ balansi don doncogo ni sanfɛla nɔgɔya la.

Saniya ni ladonni ɲuman bɛ PTFE fini min funteni ka bon, o si janya. Aw bɛ a saniya baara kɛlen kɔfɛ ani nɛnɛ kɔfɛ. Aw bɛ burusi nɔgɔlenw kɛ, safinɛ minnu tɛ fɛn kɛ, walima dɔlɔ ye walasa ka nɔgɔw sɔrɔ. Aw kana asidi/alkali barikamaw, bleach, walima nɛgɛ sɔgɔlanw kɛ abada. Silikoni tulu tulu kɛli tuma bɛɛ, o bɛ dɔ bɔ sɛgɛn na. Aw bɛ nin laadilikanw labato walasa ka finimugu tiɲɛni bali.

PTFE fini min funteni ka bon ani silikoni fini fila bɛɛ bɛ baara kɛ ni fibreglasi fini ye i n’a fɔ basigi nka u tɛ kelen ye finimugu dacogo la (PTFE resin vs silicone rubber). PTFE ka fisa ni fɛn ye min tɛ nɔrɔ, a bɛ se ka sɛgɛn, ani a bɛ se ka kɛ kemikɛli ye fo ka se 260°C ma. Silikoni fini bɛ se ka fɛn caman sɛgɛsɛgɛ, kuran bɛ se ka don a la, ani ka tasuma kɛlɛ (fo ka se 230°C ma). Sugandili ka kɛɲɛ ni i ka fɔlɔfɔlɔ ko ye.