Wetin na di maykrostrakchɔral kwaliti dɛn fɔ Teflon ay-tɛmpracha fabrik?

I. Sabstret Skel: Glas Fayba Wivin Tɛkstɔr

1. Warp-Weft Intawoven Strukchɔ

Di di klos dεn kin wev am frכm mכlti-strand glas fayv yan dεm insay klin, twil, כ כda wef dεm fכ fכm wan mεsh skel, wit wan wan monofilament dayamita dεm we de frכm sεvεra maykron to ova tεn maykron, εn wan sכft sכfayz.

2. Di Ay Porositi

bifo dεn kכt, plεnti maykron-skel por dεm de כl tu insay di fayv bכndεl dεm εn na di wכp-wεft intasekshכn no dεm, we de gi spεs fכ PTFE impregnashכn we de afta dat.

II. Kɔtin Mɔfɔlɔji: Di ​​'Ayland-Kɔtin' Strukchɔ fɔ PTFE

1. Ful Impregnashɔn Ɛnkapsuleshɔn

PTFE rεsin de go insay di gap dεm bitwin εvri wan wan filament, we de fכm wan 'rεinfכs kכnkrit'-tayp kכmכpכsit, usay di glas fayb dεm de sav as di rεinfכs fεz εn PTFE de sav as di kכntinyu matris. insay kכros-sekshכn, yu kin si di fayv dεm ivin insay di rεsin.

2. Surface Nodular Maykrostrɔkchɔ

di pure PTFE surface de sho wan difrεnt nεtwכk mכfכlכji fכ nodul dεm (partikl dεm) we intakכnekt bay fayn fibril dεm, we fכm bay di agregεshכn fכ fold-chεn lamεl dεm di tεm we di sintering prכsεs de, we de gi nכn-stik εn sεlf-lכbrikεt prכpati to di mεtirial.

3. Kɔntinyu Dens Skin Laya

di sכfayz layεr de εnrich wit pure PTFE, we de fכm wan dense, glas-fayba-fri skin film sεvεra to tεn maykron tik, we de sav as di ki barεri fכ kεmikכl inεt, nכn-stik prכpati, εn ilektrikal insulεshכn.

III. Ki Difekt: Maykroporositi ɛn Intafɛs Karakta

1. Risidyual Maykropor dɛn

di impregnashכn we nכ kכmplit כ shrinkage we dεn de sinter kin lεf maykron-skel vכyd כ krak na di sεntrכm fכ di fayv bכndεl dεm εn na di intawev no dεm, we kin mek i ridyus di rilis pכrfomans εn kεmikכl rεsistεns.

2. Intafɛs Bɔnd

Glas fayv ɛn PTFE nɔ kɔmpitabl; maykroskopik wan, yu kin si smol smol pit dεm we fayv pul-out de lεf. tru kכpl ejen tritmεnt כ mεkanikal intalכk, PTFE de ankכr di fayv dεm tayt wan, we de impruv intafεshal bכnd trεnk.

IV. Kondens Stet Karakta: Sɛmi-Kristalin Strukchɔ

1. Sfɛrulayt ɛn Banded Krɔs

PTFE na wan sɛmi-kristalin polima. afta nכmal sinterin, i de sho se sfεrulayt dεm εn bεnd kristכl dεm de kכgεst, wit kristaliniti we tipikכs de frכm 50% to 70%, εn כda mכlikul chen arenjmεnt we dεn כda fayn fayn wan.

2. Efεkt כf Krystalinity

di ay kristaliniti de endow di matirial wit lכng tεm hεt rεsistεns te to 260°C εn ekstrim lכw hεy-tεmpratura krip. Ova-sintering ɔ ɔnda-sintering kin mek yu gɛt abnɔmal kristalin stet, we kin mek di savis layf shɔt.

Di infɔmeshɔn we de ɔp na... Jiangsu Aokai Nyu Matirial Teknɔlɔji Kɔmni, Ltd.

If yu want fɔ lan mɔ bɔt di ditayl spɛsifikɛshɔn, aplikeshɔn sɛnɛriɔ, ɛn kɔstɔmayshɔn sɔlvishɔn fɔ wi ful rɛnj ɔf prɔdak dɛm, we inklud Teflon ay-tɛmpracha fabrik, Teflon ay-tɛmpracha tep, Teflon ay-tɛmpracha mɛsh bɛlt, simlɛs kɔnvaysɔ bɛlt fɔ bɔnd mashin, singl-sayd PTFE fabrik, ay-tɛmpracha rɛsistant kɔnvaysɔ bɛlt, ɛn ay-tɛmpracha resistant fayv glas fabrik, duya fil fri fɔ kɔntakt wi tru dɛn tin ya:

Savis Hotlayn:

Mista Guo +86 18944819998 pipul dɛn  

Mista Liu +86 13705266308

Wi de fala wan prɔfɛshɔnal ɛn trɔst savis filɔsofi ɔltɛm, ɛn wi de wok wit ɔl wi at fɔ gi yu wan-stɔp sɔlvishɔn ɛn atɛnshɔn savis!