PTFE High-temperature Fabric Conveyor Belt siamna atana hmanraw hman dan

PTFE high-temperature fabric siamtu hmasa ber Jiangsu Aokai New Materials chuan PTFE high-temperature fabric conveyor belt siamna atana splicing method hman tlanglawn paruk a rawn pholang a:

1. Mitre Splice / Lap Inzawmna

Hei hi non-detachable splice a ni. Conveyor belt tawp pahnih chu angle engemaw zat (45° ang chi)-a tan emaw, cm 6 vel zeta inzawm emaw a ni. A laiah high-temperature adhesive emaw F46 film emaw sandwiched a ni a, chutah chuan high-temperature iron hmangin 400°C vel ah bond a ni a, shaping atan a lum a ni.

A thatna : A hnathawh awlsam leh man tlawm, industrial splicing method hman lar ber pawl a ni.

A that lohna : Overlapping section hian joint a ti thick a, stable operation a nghawng thei bawk.

Splice Strength : Belt chakna hmasa 70% vel a ni.

Hman dan : Thermal drying hmanraw pangngai, flatness mamawh tawk, dryer leh UV curing machine te.

Flatness sang zawk atan chuan upgraded skived lap splice hi  a awm bawk. Joint area chu flatter surface atan lapping hmain thinned a ni a, chutih rualin complex processing leh technical skill sang zawk a mamawh a ni.

2. Nga hmui inzawmkhawm (Flexible Splice) .

Installation, disassembly leh tihfai awlsamna tur detachable joint a ni a, PTFE mesh conveyor belt tan pawh mainstream option a ni. Belt tawp pahnihah hian pre-sewn small hole row siam a ni a, chu chu on-site-ah steel wire emaw Kevlar rope emaw hmangin an inzawm khawm a ni.

A thatna : Hman awlsam leh fully detachable.

A that lohna : Joint-a gap awm hian material leakage a thlen thei a; a chakna a hniam hle a, heavy-load conveying atan a tha lo.

Splice Strength : Belt chakna hmasa 60% vel a ni.

Hman dan : Thil hmanrua, tihfai leh tihfai fo ngai, ei tur siam, textile print leh dyeing, boruak luh theihna sang tak leh flatness mamawhna.

3. Steel Fastener Splice hmanga siam a ni

A detachable mahse mechanical connection buaithlak tak a ni. Stainless steel fasteners hi professional tools hmangin belt tawp pahnihah nghet takin an crimp a, pin hmangin an fix bawk.

A thatna : Connection nghet tak leh tensile strength sang tak a ni.

A that lohna : A man a to a, a thenfai a awlsam lo a, belt a chhiat theih bawk. Hard fastener hian hnathawhna ri a siam thei a, metal nena inzawm hnathawhna hmunah chuan khap a ni.

Splice Strength : Ultra-high, load rit tak hmanga hnathawhna atana tha.

Hman dan : Heavy-duty, high-speed industrial conveying leh hnathawhna hmuna tensile resistance tha tak mamawh.

4. Butt Splice tih a ni

Flatness sang tak nei tura siam non-detachable joint. Belt tawp pahnih chu a inzawm tlat lovin a inmil vek a ni. A hnuaiah hian high-temperature adhesive leh reinforcing fabric te chu padded a ni a, chutah chuan heat leh pressure hnuaiah bonded a ni.

A thatna : Ultra-smooth operation atan joint-ah thickening a awm lo tluk a ni.

A that lohna : Technical lama mamawh sang, joint strength hniam leh durability tha lo.

Splice Strength : Belt chakna hmasa 50% vel a ni.

A hman dan : Precision conveying scenarios a awm a, surface flatness requirement khauh tak a awm bawk.

5. Serrated Splice hmanga siam a ni

Butt splice atanga upgraded version sang tak a ni. Joint tawp te chu interlocking zigzag shape-ah an cut a, hei hian bonding area a tipung a, connection chakna nasa takin a tichak bawk.

A thatna : A chakna sang zawk, original belt atanga 90%-95% thleng.

A that lohna : Hun rei tak a daih a, special mould a ngai a, a man pawh a to hle.

Splice chakna : 90%-95% a ni.

A hman dan : Precision leh heavy-duty conveying hmangin splice chakna leh flatness atan dual requirement khauh tak a awm bawk.

6. Wall-Type Splice hmanga siam a ni

Wear resistance sang tak leh bending fo tur atana a bik taka siam detachable joint. Kevlar puan hmanga siam cylindrical strip chu belt tawp pahnihah siam niin steel wire hmanga inzawm a ni.

A thatna : Wear resistance tha tak leh flexibility tha tak a nei.

A that lohna : Tensile strength a tlem a, load rit tak takah hman theih a ni lo.

Hman dan : Bending fo leh small-diameter rollers nei hmanrua, textile machinery ang chi.

A chunga kan tarlan te hi Jiangsu Aokai New Materials Technology Co., Ltd.

Kan full-range product-te parameter kimchang, application scenario leh customized solutions hriat belh i mamawh a nih chuan, PTFE high-temperature cloth, PTFE high-temperature tape, PTFE high-temperature mesh belt, seamless fusing machine belt, single-sided PTFE coated cloth, high-temperature resistant conveyor belt leh high-temperature resistant fiberglass te pawh a tel puan, min rawn biak theih reng e:

·  Service Hotline:Mr. Guo: +86 18944819998 Pu Liu: +86 13705266308 zawhfiah theih a ni

Professionalism leh integrity service philosophy kan zawm reng a, thinlung takin one-stop solution leh ngaihtuahna senga service kan pe che a ni.