Hanyoyin Splice don PTFE Babban Zazzabi Fabric Conveyor Belts

Jiangsu Aokai New Materials, ainihin masana'anta na PTFE high-zazzabi masana'anta, ya gabatar da shida gama gari splicing hanyoyin don PTFE high-zazzabi masana'anta conveyor belts:

1. Miter Splice / Lap Splice

Wannan yanki ne wanda ba a iya rabuwa dashi. An yanke ƙarshen bel ɗin jigilar kaya a wani kusurwa (kamar 45°) ko kuma an jefe shi da kusan 6 cm. Ana yin sandwiched mai zafi mai zafi ko fim ɗin F46 a tsakiya, sannan a haɗa shi da ƙarfe mai zafi a kusan 400 ℃ kuma a sanyaya don yin siffa.

Abũbuwan amfãni : Sauƙaƙan aiki da ƙananan farashi, ɗaya daga cikin hanyoyin rarraba masana'antu da aka fi amfani da su.

Hasara : Sashin da ke haɗuwa yana ƙaƙƙarfan haɗin gwiwa kuma yana iya rinjayar aiki mai ƙarfi.

Ƙarfin Splice : Kimanin kashi 70% na ƙarfin bel na asali.

Aikace-aikace : Na al'ada thermal bushewa kayan aiki tare da matsakaici flatness bukatun, kamar bushewa da UV curing inji.

Don mafi girman lebur, ƙwanƙwasa ƙwanƙwasa da aka haɓaka.  akwai Yankin haɗin gwiwa yana raguwa kafin yin lanƙwasa don shimfidar ƙasa, duk da haka yana buƙatar sarrafawa mai rikitarwa da ƙwarewar fasaha mafi girma.

2. Rabon Bakin Kifi (Splice Mai Sauƙi)

Haɗin haɗin da za a iya cirewa don sauƙin shigarwa, rarrabawa da tsaftacewa, da zaɓi na yau da kullun don bel ɗin jigilar ragamar PTFE. Ana yin layuka na ƙananan ramuka da aka riga aka yi a ƙarshen bel ɗin, waɗanda aka haɗa a kan wurin tare da wayar ƙarfe ko igiya Kevlar.

Abvantbuwan amfãni : Sauƙi aiki da cikakken m.

Rashin hasara : Rage a haɗin gwiwa na iya haifar da zubar da kayan abu; in mun gwada ƙarancin ƙarfi, bai dace da jigilar kaya mai nauyi ba.

Ƙarfin Splice : Kimanin kashi 60% na ƙarfin bel na asali.

Aikace-aikace : Kayan aiki da ke buƙatar rarrabawa da tsaftacewa akai-akai, irin su yin burodin abinci, bugu na yadi da rini, tare da haɓakar iska mai ƙarfi da buƙatun flatness.

3. Karfe Fastener Splice

Haɗin injiniya mai rikitarwa amma mai rikitarwa. Bakin karfe fasteners an crimped da tabbaci zuwa duka bel iyakar da ƙwararrun kayan aikin da gyarawa ta fil.

Abvantbuwan amfãni : Haɗin kai mai ƙarfi da ƙarfi mai ƙarfi.

Hasara : Babban farashi, rarrabuwa maras dacewa da yuwuwar lalacewar bel. Haɗaɗɗen ɗamara na iya haifar da hayaniya mai aiki kuma an hana su a wuraren aiki na haɗin ƙarfe.

Ƙarfin Splice : Ultra-high, dace da aiki mai nauyi.

Aikace-aikacen : Babban nauyi, isar da masana'antu mai sauri da yanayin aiki da ke buƙatar kyakkyawan juriya mai ƙarfi.

4. Guda Splice

Haɗin da ba za a iya cirewa ba wanda aka tsara don babban flatness. Ƙarshen bel ɗin biyu an daidaita su daidai ba tare da haɗuwa ba. Babban manne zafin jiki da masana'anta masu ƙarfafawa suna manne a ƙasa, sannan an haɗa su ƙarƙashin zafi da matsa lamba.

Abũbuwan amfãni : Kusan babu kauri a haɗin gwiwa don aiki mai laushi.

Rashin amfani : Babban buƙatun fasaha, ƙananan ƙarfin haɗin gwiwa da rashin ƙarfi mara kyau.

Ƙarfin Splice : Kimanin kashi 50% na ƙarfin bel na asali.

Aikace-aikace : Daidaitaccen isar da al'amuran tare da tsauraran buƙatun shimfidar ƙasa.

5. Sarrafa Splice

Sigar da aka haɓaka babban aiki na butt splice. An yanke ƙarshen haɗin gwiwa zuwa cikin sifofin zigzag masu haɗaka don haɓaka yankin haɗin gwiwa da haɓaka ƙarfin haɗin gwiwa sosai.

Abũbuwan amfãni : Ƙarfin ƙarfi, yana kaiwa 90% -95% na bel na asali.

Rashin hasara : samar da lokaci mai cinyewa, ƙirar ƙira na musamman da ake buƙata da tsada mai tsada.

Ƙarfin Rarraba : 90% -95%.

Aikace-aikacen : Daidaitawa da isar da nauyi mai nauyi tare da tsauraran buƙatun dual don ƙarfin splice da flatness.

6. Nau'in bango

Haɗin haɗin gwiwa wanda aka keɓe musamman don juriya mai ƙarfi da lankwasawa akai-akai. Silindrical tube da aka yi da Kevlar masana'anta an kafa su a duka iyakar bel kuma an haɗa su da wayar karfe.

Abvantbuwan amfãni : Kyakkyawan juriya na lalacewa da sassauci mai kyau.

Hasara : Ƙarfin juzu'i mai iyaka, bai dace da nauyi mai nauyi ba.

Aikace-aikace : Kayan aiki tare da lanƙwasawa akai-akai da ƙananan rollers, irin su kayan aikin yadi.

Jiangsu Aokai New Materials Technology Co., Ltd ne ya samar da abun cikin da ke sama.

Idan kana buƙatar ƙarin sani game da cikakkun sigogi, yanayin aikace-aikacen da keɓaɓɓen mafita na samfuranmu masu cikakken kewayon, gami da PTFE high-zazzabi zane, PTFE high-zazzabi tef, PTFE high-zazzabi raga bel, sumul fusing inji bel, guda-gefe PTFE mai rufi zane, high-zazzabi-resistant fiber lamba bel da high-zazzabi resistant fiber gilashin mu: high-zazzabi resistant fiber gilashin bel da high-zazzabi bel da high-zazzabi bel.

·  Layin Sabis: Mr. Guo: +86 18944819998 Malam Liu: +86 13705266308

Kullum muna bin falsafar sabis na ƙwararru da mutunci, kuma muna ba ku mafita ta tsayawa ɗaya da sabis na kulawa da zuciya ɗaya.