PTFE Coated Fiberglass Fabric atana Coating Methods te chu engte nge ni?

PTFE coated fiberglass fabric siamtu professional a nih angin Jiangsu Aokai New Materials hian dip coating  leh knife coating a hmang ber a ni.  he continuous flat product atan hian (Traditional spray coating hi efficiency hniam leh material waste tam vangin mass production atan a tha lo hle.) A core manufacturing technology atanga chhut chuan Aokai New Materials hian product hrang hrang atan process hrang hrang a hmang a. Coating method pahnih thatna leh that lohna chu a hnuaia mi ang hian tarlan a ni.

I. Dip Coating tih dan tur

Dip coating hi PTFE coated fiberglass fabric siamna atana hmanlai leh hman lar ber a ni.A kalphung: fiberglass base fabric chu PTFE emulsion-ah fully immerse la, full absorption atan, chutah chuan metering, drying leh sintering kal tlangin a siam zawh tawh chu hmuh theih a ni.

PTFE Coated Fiberglass Fabric hman tangkai dan:

·  Full impregnation tha tak : PTFE emulsion hian fiberglass base fabric fiber tinah a lut a, full inside-out encapsulation a tihlawhtling thei. Hei hian corrosion resistance leh air-tightness ropui tak a pe a, chemical pipeline wrapping-a hman tur PTFE fabric atan pawh a tha hle.

·  Continuous production atan a tha : Continuous production tih hriat awlsam. Multiple dip-coating leh sintering cycle hmangin unit cost hniam takin stably-in tam tak siam theih a ni.

·  Bonding chakna sang : Full impregnation hian interlayer adhesion chak tak leh delamination laka invenna sang tak a siam a ni.

PTFE Coated Fiberglass Fabric hman that lohna:

·  Single-coat thickness limited : Single dip coating hian layer te tak te (micron tlemte chauh) a siam chhuak thin. PTFE puan thuk zawk (0.2 mm aia sang) siam tur chuan dip leh sinter cycle 5–10 emaw a aia tam emaw repeated a ngai a, chu chuan siam chhuah hun rei tak leh energy hman tamna a thlen a ni.

·  Relatively average uniformity : Knife coating nena khaikhin chuan longitudinal streak tlem emaw, edge-thick leh center-thin variation emaw a lo lang thei. Friction coefficient hniam tak tak mamawhna application tan chuan hei hian non-stick performance uniformity a nghawng thei a ni.

II. Knife Coating tih dan tur

High-end PTFE coated fiberglass atan chuan knife coating hi a duh ber a ni fabric.Precision doctor blade hmangin fiberglass base fabric chung lamah PTFE emulsion metered amount a hnawih a, coating inang tlang tak a siam a ni.

PTFE Coated Fiberglass Fabric hman tangkai dan:

·  Coating thickness dik leh control theih : Blade gap siamrem hian wet film thickness chu pass khatah chiang takin set theih a ni a, sintering hnuah dry film thickness duh ang chu a hmu thei a ni. Hei hi thil siam, thickness control khauh tak mamawh, food-grade conveyor belt leh heat sealer atana PTFE fabric te tan a pawimawh hle.

·  Surface uniformity tha tak : Pinhole emaw streak emaw awm lohna surface smooth leh dense tak tak a siam a, a zau zawng zawngah non-stick leh low-friction property consistent tak tak a siam thei.

·  Material utilization rate sang : PTFE emulsion a splash emaw dripping emaw a awm lo tluk a; coating material zawng zawng hian film a siam a, chu chuan cost efficiency ropui tak a siam a ni.

PTFE Coated Fiberglass Fabric hman that lohna:

·  Thil hmanrua leh process mamawh sang : Precision coating machine, tension control system leh boruak thianghlim a mamawh. Equipment investment hi dip coating line aiin a tam zawk.

·  Substrate flatness-ah sensitive : Fiberglass base fabric-a weaving inang lo, filaments chhe emaw knot emaw chu knife coating hmangin a lian ang a, local coating a inthlau thei ang.

·  Flat product tan a ni ber : PTFE coated fiberglass fabric ang chi flat product tan chauh a tha a, 3D workpiece atan a tha lo — hei hi PTFE fabric siamnaah chuan harsatna a ni lo.

Khaihtawi

·  dip coating hi duh zawk a ni. Continuous production efficiency sang leh cost advantage sang tak neih nan

·  Knife coating hi  coating uniformity sang zawk leh thickness control dik zawk atan a tha zawk.

A taka hman chuan Aokai New Materials hian dip + knife coating process inzawmkhawm a hmang a :Pakhatnaah chuan dip coating hian fibers full PTFE encapsulation a tichiang a tichuan knife coating chuan surface ṭha famkim a thleng ta a ni. Hei hian chhungril chakna leh lei chung performance a thlunzawm a ni.

A chunga kan tarlan te hi Jiangsu Aokai New Material Technology Co., Ltd.

Kan full product line parameters, application leh custom solutions chungchang chipchiar zawka hriat duh chuan PTFE coated fiberglass fabric, PTFE high-temperature tape, PTFE high-temperature mesh belt, laminating machine seamless belt, single-sided PTFE fabric, high-temperature resistant conveyor belt leh high-temperature resistant fiberglass cloth te pawh a tel a, min rawn biak theih reng e:

·  Service Hotline: Pu Guo 18944819998 zawhfiah theih a ni

·  Pu Liu chuan 13705266308

Professional leh rinawm taka service philosophy kan vawng nung a, one-stop solution  leh attentive service pek che hi kan tum tlat a ni!