Dɛn ne Akwan a Wɔfa so Kata PTFE Coated Fiberglass Fabric so?

Sɛ́ obi a ɔyɛ adwumaden a ɔyɛ PTFE a wɔde fiberglass ntama adura ho no, Jiangsu Aokai New Materials titiriw fa dip coating  ne sekan a wɔde kata so  ma saa ade a ɛkɔ so tratraa yi. (Atetesɛm mu aduru a wɔde petepete so no mfata sɛ wɔyɛ nneɛma pii esiane sɛ ɛnyɛ adwuma yiye na wɔsɛe nneɛma pii nti.) Aokai New Materials gyina ne mfiridwuma titiriw a wɔde yɛ nneɛma so de akwan horow di dwuma ma nneɛma ahorow. Wɔayɛ mfaso ne ɔhaw ahorow a ɛwɔ akwan abien a wɔfa so kata so no mu nhwehwɛmu wɔ ase ha.

I. Dip Coating Adeyɛ

Dip coating ne atetesɛm ne ɔkwan a wɔde di dwuma kɛse a wɔfa so yɛ PTFE coated fiberglass fabric.The adeyɛ: koraa de fiberglass nnyinaso ntama no gu PTFE emulsion mu ma ɛtwetwe koraa, afei fa mita, drying ne sintering mu na woanya nea wɔawie.

Mfaso a ɛwɔ PTFE Coated Fiberglass Fabric so:

·  Excellent full impregnation : PTFE emulsion hyɛn fiber biara a fiberglass nnyinaso ntama, hu nyinaa mu-akyi encapsulation. Eyi ma ɛda nsow a ɛko tia nsɛe na mframa ntumi nkɔ mu, na ɛma ɛyɛ nea eye ma PTFE ntama a wɔde di dwuma wɔ nnuru a wɔde kyekyere nsu afiri mu.

·  Ɛfata ma kɔ so yɛ : Ɛnyɛ den sɛ wobehu kɔ so yɛ. Ɛdenam dip-coating ne sintering cycles pii so no, wobetumi ayɛ dodow kɛse no pintinn a unit cost a ɛba fam.

·  Ahoɔden a ɛkorɔn bonding : Full impregnation hwɛ hu sɛ ahoɔden interlayer adhesion ne soro ko tia delamination.

Mfomso a ɛwɔ PTFE Coated Fiberglass Fabric ho:

·  Limited single-coat thickness : Dip coating biako ma ɛyɛ tratraa yiye (micron kakraa bi pɛ). Sɛ wɔbɛyɛ PTFE ntama a ɛyɛ den (a ɛboro mm 0.2) a, ɛho hia sɛ wɔde dip ne sinter kyinhyia mpɛn pii 5–10 anaa nea ɛboro saa, na ɛde bere tenten a wɔde yɛ ne ahoɔden a wɔde di dwuma kɛse ba.

·  Relatively average uniformity : Sɛ wɔde toto sekan a wɔde kata so ho a, ebia nsensanee a ɛware kakra anaasɛ nsonsonoe a ɛyɛ anoano ne mfinimfini teateaa bɛda adi. Wɔ dwumadie a ɛhia sɛ friction coefficient a ɛba fam koraa no, yei bɛtumi aka adwumayɛ a ɛnyɛ stick no pɛpɛɛpɛ.

II. Sekan a Wɔde Kata So Adeyɛ

Sekan a wɔde kata so ne ɔkwan a wɔpɛ ma fiberglass a wɔde PTFE akata so a ɛkorɔn fabric.It de precision oduruyɛfo blade di dwuma de PTFE emulsion dodow a wɔasusuw ho gu fiberglass nnyinaso ntama no ani, na ɛyɛ ade a ɛyɛ pɛ yiye a wɔde kata so.

Mfaso a ɛwɔ PTFE Coated Fiberglass Fabric so:

·  Pɛpɛɛpɛ na controllable coating thickness : Ɛdenam adjusting blade gap, wet film thickness betumi pɛpɛɛpɛ set wɔ biako twa mu, na wɔpɛ dry film thickness yɛ sintering akyi. Eyi ho hia ma nneɛma a ɛhwehwɛ sɛ wɔhwɛ ne kɛse so denneennen te sɛ aduan-grade conveyor belts ne PTFE ntama a wɔde yɛ ɔhyew sealers.

·  Excellent surface uniformity : Ɛma ɔfasu a ɛyɛ torotoro na ɛyɛ den yiye a pinholes anaa streaks nni mu, na ɛhwɛ hu sɛ ɛyɛ nea ɛkɔ so daa kɛse a ɛnyɛ nea ɛbata ne nea ɛba fam a ɛyɛ friction wɔ ne tɛtrɛtɛ no nyinaa mu.

·  Nneɛma a wɔde di dwuma kɛse : Ɛkame ayɛ sɛ PTFE emulsion a ɛrepetepete anaasɛ ɛbɛtɔ; nneɛma a wɔde kata sini no so nyinaa na ɛyɛ sini no, na ɛma ɛho ka sua kɛse.

Mfomso a ɛwɔ PTFE Coated Fiberglass Fabric ho:

·  Nnwinnade a ɛkorɔn ne nhyehyɛe a wɔhwehwɛ : Ɛhwehwɛ sɛ wɔde mfiri a wɔde kata so pɛpɛɛpɛ, tension control systems ne nneɛma a atwa yɛn ho ahyia a ɛho tew. Nnwinnade a wɔde hyɛ mu no dɔɔso sen dip coating lines.

·  Sensitive to substrate flatness : Nwene a ɛnsɛ, nhama a abubu anaa nhama a ɛwɔ fiberglass nnyinaso ntama no mu no bɛyɛ kɛse denam sekan a wɔde kata so, na ɛbɛma mpɔtam hɔ ade a wɔde kata so no ayɛ pɛ.

·  Titiriw ma nneɛma a ɛyɛ tratraa : Ɛfata ma nneɛma a ɛyɛ tratraa te sɛ PTFE a wɔde fiberglass ntama adura ho nkutoo, ɛnyɛ 3D adwumayɛbea — a ɛnyɛ ɔhaw wɔ PTFE ntama a wɔyɛ mu.

Tɔfabɔ

·  Dip coating  na wɔpɛ ma high kɔ so production efficiency ne ɛka mfaso.

·  Sekan a wɔde kata so no  ye ma nea ɛkorɔn a wɔde kata so uniformity ne pɛpɛɛpɛ thickness control.

Wɔ nneyɛe mu no, Aokai New Materials de dip + sekan a wɔde kata so a wɔaka abom di dwuma :Nea edi kan no, dip coating hwɛ hu sɛ PTFE encapsulation a edi mũ wɔ nhama mu; afei sekan a wɔde kata so no nya ɔfasu a ɛyɛ pɛ. Eyi ka emu ahoɔden ne ɔfasu so adwumayɛ bom.

Nsɛm a ɛwɔ atifi hɔ no yɛ nea Jiangsu Aokai New Material Technology Co., Ltd. na ɛde mae.

Sɛ wopɛ nsɛm pii fa parameters, applications ne amanne ano aduru a yɛn nyinaa product line ka ho PTFE coated fiberglass ntama, PTFE high-temperature tape, PTFE high-temperature mesh belt, laminating machine seamless belt, biako-afã PTFE ntama, high-temperature resistant conveyor belt ne high-temperature resistant fiberglass ntama, yɛsrɛ wo di yɛn ho nkɔmmɔ:

·  Ɔsom Ntrɛwmu: Owura Guo 18944819998

·  Owura Liu 13705266308 ɔkyerɛwee

Yɛkura ɔsom nyansapɛ a ɛyɛ adwumayɛfoɔ ne nokwaredi mu na yɛasi yɛn bo sɛ yɛde ano aduru a ɛwɔ baabi baako  ne ɔsom a wɔde aso tie bɛma wo!