Yiziphi Izindlela Zokuhlanganisa ze-PTFE Coated Fiberglass Fabric?

Njengomkhiqizi ochwepheshe wendwangu ye-fiberglass eboshwe nge-PTFE, i-Jiangsu Aokai New Materials isebenzisa ngokuyinhloko i-dip coating  kanye nokunamathiswa kommese  kulo mkhiqizo oyisicaba oqhubekayo. (Isifutho sendabuko asifanele ukukhiqizwa ngobuningi ngenxa yokusebenza kahle okuphansi kanye nokuchithwa kwezinto eziphezulu.) Ngokusekelwe kubuchwepheshe bokukhiqiza obuyinhloko, i-Aokai New Materials isebenzisa izinqubo ezahlukene zemikhiqizo ehlukene. Izinzuzo kanye nokubi kwezindlela ezimbili zokumboza zihlaziywa ngezansi.

I. Inqubo Ye-Dip Coating

I-Dip coating iyindlela evamile futhi esetshenziswa kabanzi ekwenzeni i-PTFE camera fiberglass fabric.Inqubo: cwilisa ngokugcwele indwangu eyisisekelo ye-fiberglass ku-PTFE emulsion ukuze imunce ngokugcwele, bese udlulela kumitha, ukomisa kanye ne-sintering ukuze uthole umkhiqizo osuphelile.

Izinzuzo ze-PTFE Coated Fiberglass Fabric:

·  Ukufakwa okugcwele okuhle okuhle kakhulu : I-emulsion ye-PTFE ingena kuyo yonke imicu yendwangu eyisisekelo ye-fiberglass, ibona ukugqunywa okugcwele kwangaphakathi kwangaphandle. Lokhu kunikeza ukumelana nokugqwala okuvelele nokuqina komoya, okuyenza ilungele indwangu ye-PTFE esetshenziswa ekugoqweni kwamapayipi amakhemikhali.

·  Ifanele ukukhiqizwa okuqhubekayo : Kulula ukubona ukukhiqizwa okuqhubekayo. Ngokusebenzisa ama-dip-coating amaningi kanye nemijikelezo ye-sintering, amanani amakhulu angakhiqizwa ngokuzinzile ngezindleko eziphansi zeyunithi.

·  Amandla okubopha okuphezulu : Ukukhulelwa okugcwele kuqinisekisa ukunamathela okuqinile kwe-interlayer nokumelana okuphezulu kwe-delamination.

Ububi be-PTFE Coated Fiberglass Fabric:

·  Ukujiya okulinganiselwe kwejazi elilodwa : I-dip coating eyodwa ikhiqiza ungqimba oluncane kakhulu (ama-microns ambalwa kuphela). Ukuze kukhiqizwe indwangu ye-PTFE ewugqinsi (ngaphezulu kuka-0.2 mm), 5–10 noma ngaphezulu imijikelezo yediphu ephindaphindiwe kanye ne-sinter iyadingeka, okuholela esikhathini eside sokukhiqiza kanye nokusetshenziswa kwamandla okuphezulu.

·  Ukufana okumaphakathi ngokuqhathaniswa : Uma kuqhathaniswa nokunamathiswa kommese, ama-streaks amancane ama-longitudinal noma ukuhluka okugqinsile futhi okuzacile maphakathi kungase kuvele. Kuzinhlelo zokusebenza ezidinga i-coefficient ephansi kakhulu yokungqubuzana, lokhu kungase kuthinte ukufana kokusebenza okungagxili.

II. Inqubo Yokuhlanganisa Ummese

Ukufakwa kommese kuyinqubo ekhethwayo yengilazi ye-fiberglass ene-PTFE ephezulu Indwangu.Isebenzisa i-blade kadokotela enembayo ukuze ifake inani elilinganisiwe le-emulsion ye-PTFE ebusweni bendwangu eyisisekelo ye-fiberglass, okwenza ukunamathela okufanayo okufanayo.

Izinzuzo ze-PTFE Coated Fiberglass Fabric:

·  Ukuqina kokugqoka okunembile futhi okulawulekayo : Ngokulungisa igebe le-blade, ubukhulu befilimu obumanzi bungasethwa ngokunembile kuphasi elilodwa, futhi ukushuba kwefilimu eyomile okufunayo kutholakala ngemva kokugcoba. Lokhu kubalulekile emikhiqizweni edinga ukulawula ukujiya okuqinile njengamabhande okuthutha ebanga lokudla kanye nendwangu ye-PTFE yezivalo zokushisa.

·  Ukufana kwendawo enhle kakhulu : Ikhiqiza indawo ebushelelezi ngokwedlulele futhi eminyene engenazimbobo zokukhonkwane noma imithende, iqinisekisa izinto ezingabambeki nezinokungqubuzana okuphansi kulo lonke ububanzi.

·  Izinga eliphezulu lokusetshenziswa kwempahla : Cishe akukho ukuchaphazeka noma ukuconsa kwe-emulsion ye-PTFE; zonke izinto zokumboza zakha ifilimu, okuholela ekusebenzeni kahle kwezindleko.

Ububi be-PTFE Coated Fiberglass Fabric:

·  Izimfuneko eziphezulu zemishini nezinqubo : Idinga imishini yokumboza enembayo, amasistimu okulawula ukushuba kanye nezindawo ezihlanzekile. Ukutshalwa kwezimali kwezinto zokusebenza kuphezulu kunolayini be-dip coating.

·  Kuzwela ukucaba kwe-substrate : Ukwaluka okungalingani, imicu ephukile noma amafindo endwangu eyisisekelo ye-fiberglass azokhuliswa ngokunameka kommese, okubangela ukungalingani kwe-coat yendawo.

·  Ikakhulukazi emikhiqizweni eyisicaba : Ifanele kuphela imikhiqizo eyisicaba njengendwangu ye-fiberglass eboshiwe ye-PTFE, hhayi izingcezu zokusebenza ze-3D — okungeyona inkinga ekukhiqizweni kwendwangu ye-PTFE.

Isifinyezo

·  I-Dip coating  ikhethwa ngenxa yokusebenza kahle okuqhubekayo okuqhubekayo kanye nezinzuzo zezindleko.

·  Ukwembesa ngommese  kungcono ekufanekiseni okuphakeme kokunamathela kanye nokulawula ukujiya okunembe.

Ngokwenza, i-Aokai New Materials isebenzisa inqubo ehlanganisiwe yokucwilisa + ummese :Okokuqala, ukucwiliswa kwe-dip kuqinisekisa ukufakwa okugcwele kwe-PTFE kwemicu; ke ummese enamathela ifinyelela surface ephelele. Lokhu kuhlanganisa amandla angaphakathi nokusebenza kwendawo.

Ulwazi olungenhla lunikezwe i- Jiangsu Aokai New Material Technology Co., Ltd.

Ukuze uthole imininingwane eyengeziwe mayelana nemingcele, izinhlelo zokusebenza kanye nezixazululo ezenziwe ngokwezifiso zomugqa wethu womkhiqizo ogcwele ohlanganisa i-PTFE eboshwe ngendwangu ye-fiberglass, i-PTFE high-temperature tape, ibhande le-PTFE elinezinga eliphezulu lokushisa, ibhande elingenamthungo lomshini, indwangu ye-PTFE enohlangothi olulodwa, ibhande lokuhambisa elimelana nokushisa okuphezulu kanye ne-high-temperature mesh, sicela uxhumane ne-fiberglass:

·  Inombolo Yezinkonzo: Mnu. Guo 18944819998

·  UMnu Liu 13705266308

Siphakamisa ifilosofi yesevisi esebenzayo nethembekile futhi sizibophezele ekukunikezeni izisombululo zokuma okukodwa  kanye nensizakalo yokunaka!