ʻO ke kumu lāʻau lapaʻau fiberglass

Ma ke ʻano he mea hana ʻoihana o nā lole wela kiʻekiʻe PTFE, Hāʻawi ʻo Jiangsu Aokai New Materials iā ʻoe i nā ʻike loea. ʻO ke kumu nui o ka mālama ʻana i ka fiberglass surface ʻo ke kūkulu ʻana i kahi alahaka molekala  ma waena o ka fiberglass inorganic a me ka PTFE organik, i mea e hoʻoponopono pono ai i kā lākou incompatibility inherent.

ʻO ke ʻano kikoʻī, ʻo ka ili o ka fiberglass nā pūʻulu polar hydrophilic, ʻoiai ʻo PTFE he hydrophobic non-stick material me ka haʻahaʻa haʻahaʻa loa o ka ikehu (ma kahi o 18 mN/m). Hiki i nā hui silanol (Si-OH) i nā hui hoʻohui ke hoʻokuʻu me nā pūʻulu ikaika ma ka ʻili fiberglass e hana i nā paʻa kemika paʻa Si-O-Si, e lawelawe ana ma ke ʻano he kumu hoʻopaʻa kemika paʻa. Hiki i nā hui hana kūlohelohe ma kēlā ʻaoʻao ke hui pū me nā uhi ma o ka hoʻopili kino a i ʻole ka hopena kemika.

I kēia manawa, hoʻonohonoho ka fiberglass i mālama ʻia i kahi ʻano amphipathic i hoʻonohonoho pono ʻia, e hoʻomaikaʻi nui i ka hopena pulu o ka emulsion PTFE a hoʻemi i nā pores kūloko a me nā hemahema o ka coating.In Eia kekahi, hoʻoheheʻe ʻia nā fluoroplastics e like me PFA a me FEP e hoʻohui pinepine ʻia i loko o ka emulsion PTFE e like me nā mea hoʻoheheʻe wela. Hoʻopili lākou me ka fiberglass i mālama ʻia e hana i kahi papa gradient interfacial buffer layer, hoʻopau i nā loli koʻikoʻi hikiwawe a hoʻomaikaʻi hou i ka paʻa paʻa.

ʻO ka haʻalele ʻana i kēia hoʻomaʻamaʻa honua e hoʻoulu i kahi ʻano o nā pilikia hopena:

ʻO ka launa ʻole o ka interface a me ka delamination  ʻO kēia ka hemahema koʻikoʻi. Hoʻokuʻu ʻole ʻia ka fiberglass i ka PTFE, ʻaʻole hiki ke hoʻopili paʻa ka uhi. Hiki i ka ʻili ke ʻili a me ka ʻili ʻana ma lalo o ka ikaika o waho e like me ka ʻohi ʻana a me ke kulou ʻana. I nā kūlana hana maoli me ke koʻikoʻi mechanical a i ʻole ke ʻano o nā pōʻai wela a me ke anuanu e like me nā wili wela kiʻekiʻe a me nā mea hoʻokele demolding, ʻo nā composites me ka ʻole o ka hoʻopaʻa ʻana i nā kemika paʻa e loaʻa i ka hoʻokaʻawale interlayer wikiwiki a me ka hana ʻole.

ʻO ka hāʻule holoʻokoʻa o nā waiwai mechanical  Ke alakaʻi nei ka nawaliwali o ka pilina pili i ka hoʻohaʻahaʻa ʻana i ka ikaika tensile, ka pale ʻana a me ka pale ʻana i ke kapa. ʻO ka pulu ʻole ʻole ʻia ma luna o ka fiberglass maka e waiho i nā ʻāpana micro ʻike ʻole ʻia a me nā hemahema i loko o nā uhi, kahi i lilo i wahi hoʻomaka o ka hemahema mechanical.

Nā waiwai dielectric i hōʻino ʻia  Ma lalo o ka lawelawe wela kiʻekiʻe no ka wā lōʻihi, ʻo ke koena o ka wai a me nā wahi liʻiliʻi i loko o ka interface e hoʻoulu i nā hopena oxidation. Hana ʻia nā oxides ma ke ʻano he media conductive, ka hopena i ka hoʻonui mau ʻana o ka dielectric a me ka nalowale dielectric. He kīnā make kēia no nā māla me nā koi pono hana uila e like me nā laminates copper clad (CCL) a me nā mea kiʻiʻoniʻoni kiʻekiʻe.

Hoʻopōkole ʻia ke ola lawelawe  Ma muli o nā kumu ʻino i luna, ʻo nā huahana i hoʻopau ʻole ʻia e hōʻike i ka hilinaʻi haʻahaʻa haʻahaʻa, a ʻo ko lākou ola lawelawe he hapa wale nō ia o nā huahana i mālama ʻia.

Hāʻawi ʻia kēia ʻike e Jiangsu Aokai New Materials Technology Co., Ltd.

Inā pono ʻoe e ʻike i nā ʻāpana kikoʻī, nā hiʻohiʻona noi a me nā hoʻonā i hoʻopili ʻia o kā mākou huahana piha piha me ka PTFE kiʻekiʻe-mehana lole, PTFE kiʻekiʻe-mehana lipine, PTFE kiʻekiʻe wela mesh kāʻei, seamless fusing mīkini kāʻei, hoʻokahi ʻaoʻao PTFE lole, kiʻekiʻe wela kūʻokoʻa conveyor kāʻei a me ke kiʻekiʻe wela kūʻokoʻa fiberglass lole e hoʻokaʻaʻike mai iā mākou:

·  Mr. Guo: +86 18944819998

·  Mr. Liu: +86 13705266308

Hoʻopili mau mākou i ka ʻoihana a me ka kūpaʻa, i hoʻolaʻa ʻia i ka hāʻawi ʻana iā ʻoe i nā hopena hoʻokahi a me nā lawelawe noʻonoʻo.