PTFE ay-tɛmpracha fabrik (PTFE-coated fiberglass) gɛt po fleks rɛsistɛns bikɔs di fayv glas sabstret na inhɛrɛntly brittle. Fabrik dεm we tכn (0.08mm) de liv fכ כndrεd to tawzin fold dεm; hεvi gred (>0.25mm) krak afta dכzin. Satin wev de wok pas plain wev. Fɔ kɔntinyu fɔ bɛnd rɛsiprokɛt, tink bɔt sɔlid PTFE fim ɔ aramid-bɛs fabrik insted.

PTFE ay-tɛmpracha fabrik (PTFE-coated fiberglass) na wan we dɛn kin yuz bɔku bɔku wan fɔ print tɛkstayl ɛn day fɔ ɔt transfa printin bɛlt (180-230°C), skrin printin tebul kɔva, drying mɛsh bɛlt, fiuz mashin bɛlt, ɛn rɔla rap. I nɔ-stik sɔfays de mek ink/adhesive rɛsɛdyu nɔ de, i de ridyus di tɛm we dɛn de klin ɛn i de mek di klos kwaliti bɛtɛ. Bɛlt dɛn we nɔ gɛt ɛnd we nɔ gɛt wan bɔt de mek pɔsin ebul fɔ kɔntinyu fɔ mek tin dɛn.

PTFE ay-tɛmpracha fabrik (PTFE-coated fiberglass) na prɛmiɔm filta midia fɔ ekstrim kɔndishɔn: fɔ pul flu gas dɔst (simɛnt, west insinɛshɔn, kol bɔyl dɛn we go rich 260°C), kɔrosiv likwid filtreshɔn (asid, alkali, ɔyl), it/famasiutik stɛriyl filtreshɔn, ɛn HEPA klin rum filta. Di say we nɔ stik kin mek dɔst nɔ kek ɛn i kin mek i izi fɔ klin. Membran-laminated gred dεm de achy ultra-lכw efyushכn.

PTFE ay-tɛmpracha klos de mentɛn fayn fayn ilɛktrik insuleshɔn frɔm -180°C to 260°C: volyum rɛsistiviti >1013 Ω·cm na 200°C, dayelɛktrik kɔnstant stebul na 2.0-2.1. כp 260°C, PTFE de sof, i de kכmכt oba 327°C, i de lכs insulεshכn fכ כltεm. dכn 0°C, insulεshכn de impruv bכt di kכt de bi brit. Stay insay 260°C fɔ rili pefɔmɛns.

PTFE ay-tɛmpracha fabrik (PTFE-coated fiberglass) na fayn tin fɔ it kɔnvayɔr bɛlt bikɔs ɔf in 260°C ɔt rɛsistɛns, -70°C kol fleksibiliti, nɔ-stik sɔfays, ɛn FDA kɔmplians. Ki aplikeshɔn dɛn: bekeri ɔvin (biskit, bred, pizza), fried it kɔnvayɔ, kandy kol layn, friz tanɛl, ɔt sila, ɛn rɔla rap. I de ridyus di tɛm we dɛn de west ɛn fɔ klin.

Warp ɛn weft density fɔ fayv glas fabrik de ditarmin PTFE ay-tɛmpracha klos pefɔmɛns. di hכy dεnsiti de inkrεs di tεnsil trεnk εn di sכfayz smol sכft bכt i de ridyus tεar trεnk (invεst U-kכv), fεksibiliti, εn kכt pεnεtreshכn. Optimal density balans penetration, tear resistance, fleksibiliti, ɛn surface finish. Low density suits dinamik bɛnd; ay density fɔ nɔ-stik ɛn insuleshɔn.

Kalɛnda – we yu prɛs PTFE-kɔt fabrik bitwin di ɔt miro rɔla dɛn na 360-380°C – i de chenj di sɔfayz mɔfɔlɔji, rilis prɔpati, impermiabiliti, ɛn mɛkanikal pefɔmɛns bad bad wan. i de ridyus di roughness frכm Ra 0.5-1.0 μm to <0.05 μm, i de sial pinhol dεm, i de impruv di wear resistance, bכt i de dכn tiar strכng εn fleksibiliti. Impɔtant fɔ rilis layna ɛn ilɛktrik insuleshɔn.

PTFE ay-tɛmpracha fabrik ɛn silikon fabrik ɔl tu de yuz fayv glas klos as bays bɔt dɛn difrɛn pan kɔtin matirial (PTFE rɛsin vs silikon rɔba). PTFE fayn fayn wan pan nɔ-stik, wear resistans, ɛn kemikal resistans te to 260°C. Silikɔn klos de gi fayn fayn fleksibiliti, ilɛktrik insuleshɔn, ɛn faya rɛsistɛns (we go rich 230°C). Pik bay wetin yu de put fɔs.

PTFE ay-tɛmpracha fabrik (PTFE mɛmbran matirial) na prɛmiɔm chuk fɔ tɛnsiɛl akitɛkɛt. Ki advantej: 30+ ia ɔda layf, sɛlf-klin sɔfays (ren wata de was dɔti), sɔft layt transmishɔn (6-13%), Klas A faya retinj, ɛn stɛl-layk trɛnk we ɔnda 1.5 kg/m2. Dɛn kin yuz am na stediɔm dɛn, aypɔt dɛn, ɛn aykɔnik bildin dɛn ɔlsay na di wɔl.

PTFE ay-tɛmpracha fabrik de gi ɛksepshɔnal kemikal rɛsistɛns, we de bia wit strɔng asid, alkali, ɔrganik sɔlvɛnt, ɛn kɔrosiv gas dɛn. Dis atikul de tɔk mɔ bɔt di tin dɛn we i nɔ ebul fɔ du, di tin dɛn we i nɔ ebul fɔ du (molten alkali metals, strɔng fluorinating agents), ɛn di men tin dɛn lɛk di tɛmpracha, di kɔnsɛntreshɔn, ɛn di mɛkanikal strɛs.