2026-06-09 khan a rawn thleng ang
PTFE high-temperature fabric hi 300°C thleng a stable a, mahse kangmeiah chuan a chhe vek a, gas tha lo tak tak a chhuah chhuak thin: hydrogen fluoride (HF) (corrosive, pulmonary edema) leh perfluoroisobutylene (PFIB) (colorless, odorless, ~10x more toxic than phosgene, no antidote). Tin, carbon monoxide, PFOA residue, leh trace dioxins te pawh a awm bawk. Meikhu mask pangngai hian a hlawk lo va; self-contained breathing apparatus (SCBA) hmang rawh. Symptoms a tlai thei.
Chhiar belh rawh
2026-06-08 khan a rawn thleng ang
PTFE high-temperature fabric (PTFE-coated fiberglass) hi microwave heating atan a tha hle a, a chhan chu microwave hi energy absorb lovin a thawn chhuak a, 260°C a do thei a, non-stick surface a nei bawk. A hmanna tur chu microwave baking mats, industrial dryer conveyor belt, chemical digestion atana reactor linings, leh microwave popcorn bag liners te a ni. Food contact atan FDA grade a awm.
Chhiar belh rawh
2026-06-05 khan a rawn thleng ang
PTFE high-temperature fabric (PTFE-coated fiberglass) hian flex resistance a nei tha lo a, a chhan chu fiberglass substrate hi a pianphungah a brittle a ni. Puan thianghlim zawk (0.08mm) chu fold za tam tak atanga sang tam takah a dam khawchhuak a; grade rit (>0.25mm) te chu dozens hnuah a crack thin. Satin weave hian plain weave a phak lo hle. Continuous reciprocating bending atan chuan solid PTFE film emaw aramid-based fabric emaw ngaihtuah zawk rawh.
Chhiar belh rawh
2026-06-05 khan a rawn thleng ang
PTFE high-temperature fabric (PTFE-coated fiberglass) hi heat transfer printing belt (180-230°C), screen printing table cover, drying mesh belt, fusing machine belt, leh roller wrapping atana textile printing leh dyeing-ah te hman a ni nasa hle. A non-stick surface hian ink/adhesive residue a veng a, cleaning downtime a ti tlem a, fabric quality a ti tha bawk. Seamless endless belts hmang hian siam chhuah chhunzawm zel theih a ni.
Chhiar belh rawh
2026-06-04 khan a rawn thleng ang
PTFE high-temperature fabric (PTFE-coated fiberglass) hi boruak khirh tak tak tan chuan filter media tha tak a ni a: flue gas leivut paih (cement, bawlhhlawh hal, coal boiler 260°C thleng), corrosive liquid filtration (acids, alkalis, oils), food/pharmaceutical sterile filtration, leh HEPA cleanroom filter te. Non-stick surface hian dust caking a veng a, awlsam taka tihfai theih a ni. Membrane-laminated grade te hian ultra-low emission an ti thei a ni.
Chhiar belh rawh
2026-06-04 khan a rawn thleng ang
PTFE high-temperature cloth hian -180°C atanga 260°C thleng electrical insulation tha tak a vawng reng a: volume resistivity >1013 Ω·cm 200°C ah, dielectric constant 2.0-2.1 ah a stable. 260°C aia sangah chuan PTFE chu a nem a, 327°C aia sangah a chhe a, insulation a hloh vek a ni. 0°C hnuaiah chuan insulation a tha a mahse coating chu a brittle ta thung. Performance rintlak tak neih theih nan 260°C chhungah awm rawh.
Chhiar belh rawh
2026-06-03 khan a lo thleng ta
PTFE high-temperature fabric (PTFE-coated fiberglass) hi food conveyor belt atan a tha hle a, a chhan chu 260°C heat resistance, -70°C cold flexibility, non-stick surface, leh FDA compliance vang a ni. A hmanna tur pawimawh tak tak: bakery oven (biscuit, chhang, pizza), fried food conveyor, candy cooling line, freezing tunnel, heat sealer, leh roller wrapping te. Bawlhhlawh leh tihfai hun a ti tlem.
Chhiar belh rawh
2026-06-01 khan a lo thleng dawn a ni
Calendering – PTFE-coated fabric chu heated mirror rollers inkara 360-380°C-a press hian surface morphology, release property, impermeability, leh mechanical performance te nasa takin a tidanglam a ni. Ra 0.5-1.0 μm atanga <0.05 μm ah roughness a tihhniam a, pinholes a seal a, wear resistance a ti tha a, mahse tear strength leh flexibility a ti tlem thung. Release liners leh electrical insulation atan a pawimawh hle.
Chhiar belh rawh
2026-06-01 khan a lo thleng dawn a ni
Fiberglass weave pattern – plain, twill, emaw satin emaw hian PTFE high-temperature fabric property nasa takin a nghawng a ni. Satin weave hian tear strength sang ber (2-3x plain) leh flexibility a pe a, dynamic bending atan a tha hle. Plain weave hian dimensional stability tha ber leh peel adhesion a pe a, static application atan a tha hle. Twill hian property zawng zawng chu general use atan a balance vek.
Chhiar belh rawh
2026-05-28 khan a rawn thleng ang
PTFE high-temperature fabric-a coating uniformity hi thil pali hmanga teh a ni: coating formulation (particle size 0.15-0.35 μm, viscosity, solid content), coating & sintering process (uniformity atan blade coating duh zawk), substrate quality (weave pattern, pre-treatment), leh production environment (20-25°C, <60% RH). Dip + blade combined process hian penetration leh surface smoothness a balance a.
Chhiar belh rawh