Mɔfiame sia ƒo nu tso PTFE dzoxɔxɔ gã tape tiatia na injection molding demolding kple anti-stick dɔwɔwɔwo. Tiatia si wotu ɖe dzoxɔxɔ dzi: ≤260°C na plastik siwo wozãna le xexeame katã (silikon PSA kasɛt si wozãna ɖaa, 0.13-0.18mm); 260-300°C na mɔ̃ɖaŋununya ƒe plastik siwo ƒe dzoxɔxɔ lolo abe PC, PA66, POM (silicone adhesive si ƒe dzoxɔxɔ lolo, 0.18-0.25mm); 300-400°C na PEEK, LCP, PPS si te ɖe duƒula dzodzoewo ŋu (adhesive tape do kpo nu; zã PTFE avɔ si me nulénu mele o alo PFA film). Tiatia si wotu ɖe nusiwo wotsɔ wɔe dzi: nusiwo tacky hiã PTFE dzadzɛ siwo me woɖea asi le ŋutɔ; nusiwo wotsɔ glass/mineral yɔ fũu hiã 0.25mm + tepe si te ŋu dona le wo ŋu vevie; nusiwo wotsɔ kpe ɖe nu ŋu siwo gblẽa nu le ame ŋu biaa atike si te ŋu nɔa te ɖe nulénu nu kple nusi le ʋeʋẽm; static-sensitive dɔwɔwɔwo hiã anti-static yevu PTFE tape.

Wowɔa avɔ si ƒe dzoxɔxɔ lolo PTFE si te ŋu léa nu geɖe to PTFE tsyɔtsyɔ ɖe fiberglass avɔ si ŋu ŋusẽ le ŋutɔ dzi, si naa ŋusẽ si te ŋu léa nu, dzoxɔxɔ si te ŋu nɔa te ɖe enu, nɔnɔme siwo me meléna o, atikewo ƒe tsitretsitsi, kple ʋuʋudedi si mebɔ o. Dɔ vevi siwo wozãna dometɔ aɖewoe nye: dɔwɔƒewo ƒe tsɔtsɔ yi teƒe bubuwo (dzoxɔxɔ ƒe nubablɛwo, nuɖuɖu ɖaɖa, avɔlɔ̃mɔ̃wo, pepa/film ƒuƒu); composite molding release avɔ kple dzodzoe nyadzɔdzɔŋlɔla cushion liners; xɔmetsovɔ siwo kpɔa ame ta kple dzoxɔxɔnutsitikewo tsɔtsɔ ƒo ƒui; elektrikmɔ̃ kple transformer ƒe nusiwo xea mɔ na dzoxɔxɔ; bearing siwo wotsɔna ƒua du kple pɔmpiwo ƒe kpeɖeŋutɔ tutu; atikewo ɖeɖeɖa kple valvɔ nutrenu le nuto siwo me nu gblẽna le me. Tensile ŋusẽ gã nana be enɔa anyi didina le tete, vuvu, ƒoƒo enuenu, kple dzoxɔxɔ gã mɔ̃ ƒe nuteɖeamedzi le dɔ sesẽ vovovo siawo me.

Le sintering me la, PTFE ƒe akpa siwo le fiberglass avɔ dzi la ƒuna wu 327°C, si gblẽa lamelae gbãtɔ siwo wotsɔ kɔsɔkɔsɔ xatsa kple nusuewo ƒe liƒowo dome tsɔ wɔa amorphous melt. Ne PTFE fa la, egatrɔna zua spherulites siwo me lamellae siwo le radially oriented le, kple kristalo ƒe 50–70%. Fafa ƒe agbɔsɔsɔme ye afia kristalo ƒe blibodede: fafa blewu naa kristalo ƒe nɔnɔme si lolo wu, spherulites lolo wu, sesẽme geɖe wu; ne wotsi kabakaba la, enaa spherulites nyo wu eye wòte ŋu trɔna ɖe nɔnɔmewo ŋu nyuie wu.